Modelling of black carbon statistical distribution and return periods of extreme concentrations

Eight datasets of 1-h black carbon (BC) concentrations measured in Warsaw agglomeration (Poland), at urban background and sub-urban sites, and in Racibórz, a small town in Upper Silesia district (regional background site) were analyzed to evaluate BC levels, daily profiles and statistical distributions of concentrations in Central-Eastern European region. The observed mean levels ranged from 1483 ng m⁻³ in suburban site during summer to 3358 ng m⁻³ in regional background site in winter. Observed diurnal patterns were bimodal in the locations dominated by traffic emissions, but unimodal, with elevated evening peak in individually heated residential area. Three theoretical frequency distributions were applied to fit analyzed datasets separately. The lognormal distribution was the most appropriate to represent the middle-range values, while the high concentrations were satisfactorily predicted by the type I two-parameter exponential distribution which was used to estimate the return periods of extreme concentrations for winter months.     

碱法造纸黑液驱油研究

在玻璃细珠充填柱人造岩心模型上进行了碱法造纸黑液驱替稠油的实验研究，考察了稠油酸值、盐、温度、岩心渗透率、注入量和注入方式的影响。在实验条件下碱法造纸黑液驱稠油的采收率较水驱提高２５％     

Ozonation of CI Reactive Black 5 using rotating packed bed and stirred tank reactor

This study investigates the ozonation of CI Reactive Black 5 (RB5) by using the rotating packed bed (RPB) and completely stirred tank reactor (CSTR) as ozone contactors. The RPB, which provides high gravitational force by adjusting the rotational speed, was employed as a novel ozone contactor. The same ozone dosage was separately introduced into either the RPB or the CSTR for the investigation, while the experimental solution was continuously circulated within the apparatus consisting of the RPB and CSTR. The decolorization and mineralization efficiencies of RB5 in the course of ozonation are compared for these two methods. Moreover, the dissolved and off‐gas ozone concentrations were simultaneously monitored for the further analysis. As a result, the ozone mass transfer rate per unit volume of the RPB was significantly higher because of its higher mass transfer coefficient and gas–liquid concentration driving force. Furthermore, ozonation kinetics was found to be independent of the gravitational magnitude of an ozone gas–liquid contactor. Therefore, the results suggest employing RPBs as ozone‐contacting devices with the advantage of volume reduction. The experimental results, which can be used for further modeling of the ozonation process in the RPB, also show the requirement of correct design for the RPB. Consequently, the present study is useful for the understanding of practical application of RPBs. Copyright © 2004 Society of Chemical Industry     

新型双旋流平焰烧嘴的研制与应用

介绍了一种新型双族流平焰烧嘴的设计思路、结构参数及工业试验结果。其结构特点是每个部件都易装易卸，其煤气旋流器的位置可根据煤气压力变化进行调节，无需稳焰器就可保证煤气压力在较大范围波动时，都可形成稳定的平展火焰。     

ICP-AES法测定封严涂层中BN含量

利用IC－AES法测定了封严涂层的BN，并对样品的溶解方法，仪器工作参数，光谱干扰等进行了研究。方法的相对标准偏差＜2％（n=10)，加标回收率在95％以上，方法简便，可靠，结果令人满意。     

TiB2与BN复相陶瓷的渗流模型

试验结果证实,TiB₂与BN复相陶瓷的导电性能符合渗流理论,原料粉粒度配比下,其渗流阀值为V_c%=22.9%;原料粉粒度比的改变将改变渗流阀值,从而改变各配比下的电阻率值;TiB₂与BN在SPS系统中快速烧结,晶粒的尺度比与原料粉的粒度比基本保持一致。     

基于黑箱方法的压气站运行优化模型研究--管段约束处理方法研究

针对枝状长输天然气管道运行状况，首次提出采用将整个长输管道系统分为压气站系统和管道系统两大类别，然后对两大系统分别进行单独的处理。基于黑箱方法的复杂枝状管网系统压气站运行优化模型，主要包括目标函数和约束条件。在约束条件中，最难以处理的问题之一就是管段的约束，针对复杂枝状输气管网的管段约束条件提出了一种新的处理方法。研究证明：该处理方法易于进行计算机编程实现，体现了结构化的算法思想。     

Studies on the treatment of brilliant green solution by combination microwave induced oxidation with CoFe2O4

In this work the synergistic effects of microwave (MW) irradiation induced oxidation processes and CoFe₂O₄ were studied for the degradation of brilliant green (BG) from aqueous solutions. Under the optimum condition, the ratio of solid to liquid was 1:167 (0.3 g CoFe₂O₄ mixed with 50 mL of 20 mg L⁻¹ BG solution), MW power 600 W, and the time of the irradiation 2 min. And the decolorization rate could reach up to 100%. Further investigation showed that BG was degraded by MW-induced oxidation combined with CoFe₂O₄ surface adsorption. The CoFe₂O₄ could increase the efficiencies of MW degradation and be used repeatedly. The experimental results indicated that the method of MW degradation BG in the presence of CoFe₂O₄ could reduce reaction time and increase product yield.     

Recent Advances in Boron Nitride Based Hybrid Polymer Nanocomposites

Boron nitride (BN) is an eminent inorganic compound having many interesting characteristics such as improved oxidation resistance, mechanical strength, good thermal conductivity (TC), higher bandgap, high chemical stability, thermal stability, high hydrophobicity, and electrical insulation. The use of BN as a filler in polymers is a well-established strategy to tailor the properties of polymer composites. Recent studies depict an interesting urge to reap the synergistic effect of various nanofillers with BN in the form of hybrids. Hence the consolidation of the works on BN based hybrid fillers would definitely attract researchers so that these new filler systems could be transformed into useful polymer nanocomposites in future. This review article focuses on the synthesis and characterization of various boron nitride based hybrids in detail. Moreover, the review also throws light on different BN hybrid reinforced polymer nanocomposites (PNCs) and their thermal, electrical, electronic as well as biomedical applications in a detailed manner. Thus the review anticipates serving as a tool toward understanding the recent trends in the field of boron nitride hybrid based ternary polymer composites.