Growth and optical properties of ZnO nanorod arrays on Al-doped ZnO transparent conductive film

ZnO nanorod arrays (NRAs) on transparent conductive oxide (TCO) films have been grown by a solution-free, catalyst-free, vapor-phase synthesis method at 600°C. TCO films, Al-doped ZnO films, were deposited on quartz substrates by magnetron sputtering. In order to study the effect of the growth duration on the morphological and optical properties of NRAs, the growth duration was changed from 3 to 12 min. The results show that the electrical performance of the TCO films does not degrade after the growth of NRAs and the nanorods are highly crystalline. As the growth duration increases from 3 to 8 min, the diffuse transmittance of the samples decreases, while the total transmittance and UV emission enhance. Two possible nanorod self-attraction models were proposed to interpret the phenomena in the sample with 9-min growth duration. The sample with 8-min growth duration has the highest total transmittance of 87.0%, proper density about 75 μm⁻², diameter about 26 nm, and length about 500 nm, indicating that it can be used in hybrid solar cells.     

Growth of all-carbon horizontally aligned single-walled carbon nanotubes nucleated from fullerene-based structures

All-carbon single-walled carbon nanotubes (SWCNTs) were successfully synthesized, nucleated using a fullerene derivative. A systematic investigation into the initial preparation of C₆₀ fullerenes as growth nucleators for the SWCNTs was conducted. Enhancement in the yield of the produced SWCNT has been achieved with exploring different dispersing media for the fullerenes, the period, and environment of the initial thermal treatment of the fullerenes in addition to the use of different fullerene-based structures. The systematic studies significantly advance our understanding of the growth of the all-carbon catalyst-free single-walled carbon nanotubes. Field-effect transistors were fabricated using the catalyst-free SWCNT and then electrically characterized, showing current capacity as high as the well-studied catalyst-assisted nanotubes.     

Reactive Energetic Plasticizers for Energetic Polyurethane Binders Prepared via Simultaneous Huisgen Azide‐Alkyne Cycloaddition and Polyurethane Reaction

Reactive energetic plasticizers (REPs) for use in glycidyl azido polymer (GAP) based polyurethane (PU) energetic binders were investigated. These REPs consisted of an activated terminal alkyne group that was expected to give rise to Huisgen azide‐alkyne 1,3‐dipolar cycloaddition within the specific pot life for a PU formulation to prevent the migration of plasticizers, and with a gem‐dinitro group as an energy resource. A quantitative miscibility investigation between the plasticizers and uncured GAP showed that REPs exhibited better miscibility than conventional energetic plasticizers. The plasticization effect of the REPs on the GAP prepolymer with respect to the reduction of the viscosity illustrated REPs can effectively reduce the viscosity of the GAP prepolymer from 6,015 cP to 150–240 cP at the processing temperature when 50 wt‐% of REP was added. A comparison of the click reactivity and activation energies (E_a) of REPs and GAP prepolymer elucidated that the reactivity of azide‐alkyne cycloaddition depended on the dipolarophilicity of REPs which could be controlled by adjusting the length of methylene spacer between electron‐withdrawing groups (EWG) and neighboring alkynes in REPs. Thermogravimetric analysis manifested REP/GAP‐based PU binders maintained the thermal stability of the control GAP‐based PU binder. The mechanical properties and impact insensitivity of the GAP‐based PU binders were also improved by the incorporation of REPs.     

Catalyst-free growth of large scale nitrogen-doped carbon spheres as efficient electrocatalysts for oxygen reduction in alkaline medium

Nitrogen-doped carbon spheres (NCS) are synthesized by directly pyrolyzing a nebulized solution of xylene and ethylenediamine via a spray pyrolysis method, without using a catalyst. X-ray photoelectron spectroscopy (XPS) measurements confirm that the NCS only contain C, N and O. The electrocatalytic performances show that the NCS exhibit a high catalytic activity, long-term stability, and an excellent methanol tolerance for the oxygen reduction reaction (ORR) in an alkaline medium. This study successfully develops a new non-precious metal catalyst, which exhibits an excellent electrocatalytic performance, using a simple, cost-effective and scalable method. It also provides an increased fundamental understanding in the origins of ORR activity enhancements using N-doped carbon materials.     

Selective Growth of Vertical-aligned ZnO Nanorod Arrays on Si Substrate by Catalyst-free Thermal Evaporation

By thermal evaporation of pure ZnO powders, high-density vertical-aligned ZnO nanorod arrays with diameter ranged in 80–250 nm were successfully synthesized on Si substrates covered with ZnO seed layers. It was revealed that the morphology, orientation, crystal, and optical quality of the ZnO nanorod arrays highly depend on the crystal quality of ZnO seed layers, which was confirmed by the characterizations of field-emission scanning electron microscopy, X-ray diffraction, transmission electron microscopy, and photoluminescence measurements. For ZnO seed layer with wurtzite structure, the ZnO nanorods grew exactly normal to the substrate with perfect wurtzite structure, strong near-band-edge emission, and neglectable deep-level emission. The nanorods synthesized on the polycrystalline ZnO seed layer presented random orientation, wide diameter, and weak deep-level emission. This article provides a C-free and Au-free method for large-scale synthesis of vertical-aligned ZnO nanorod arrays by controlling the crystal quality of the seed layer.     

Continuous production of soybean biodiesel with compressed ethanol in a microtube reactor using carbon dioxide as co-solvent

This work investigates the production of fatty acid ethyl esters (FAEE) from the transesterification of soybean oil in supercritical ethanol in a continuous catalyst-free process using carbon dioxide as co-solvent. The experiments were performed in a microtube reactor in the temperature range of 523 K to 598 K, from 10 MPa to 20 MPa, oil to ethanol molar ratio from 1:20 to 1:40, and co-solvent to substrates mass ratio from 0.05:1 to 0.2:1. Results showed that ethyl esters yield obtained increased with increasing addition of carbon dioxide to the system. Considerable reaction yields were achieved at 598 K, 20 MPa, oil to ethanol molar ratio of 1:20 and using a CO₂ to substrate mass ratio of 0.2:1.     

Epitaxial Catalyst-Free Growth of InN Nanorods on c-Plane Sapphire

We report observation of catalyst-free hydride vapor phase epitaxy growth of InN nanorods. Characterization of the nanorods with transmission electron microscopy, and X-ray diffraction show that the nanorods are stoichiometric 2H–InN single crystals growing in the [0001] orientation. The InN rods are uniform, showing very little variation in both diameter and length. Surprisingly, the rods show clear epitaxial relations with the c-plane sapphire substrate, despite about 29% of lattice mismatch. Comparing catalyst-free with Ni-catalyzed growth, the only difference observed is in the density of nucleation sites, suggesting that Ni does not work like the typical vapor–liquid–solid catalyst, but rather functions as a nucleation promoter by catalyzing the decomposition of ammonia. No conclusive photoluminescence was observed from single nanorods, while integrating over a large area showed weak wide emissions centered at 0.78 and at 1.9 eV.     

New process for catalyst-free biodiesel production using subcritical acetic acid and supercritical methanol

The production of glycerol as a by-product is unavoidable in the current conventional biodiesel manufacturing processes. Since biodiesel production is expected to increase in the near future, effective utilization of glycerol will become an issue of interest. In this study, therefore, a process consisting of subcritical acetic acid treatment to convert rapeseed oil to fatty acids and triacetin followed by conversion of the obtained fatty acids to their fatty acid methyl esters in supercritical methanol treatment was investigated. The obtained results clearly revealed that this two-step reaction could proceed effectively at a high reaction rate, and that fatty acid methyl esters and triacetin could be obtained under milder reaction condition than the one-step process utilizing supercritical methyl acetate and supercritical methanol.     

A catalyst-free growth of aluminum-doped ZnO nanorods by thermal evaporation

The growth of Al:ZnO nanorods on a silicon substrate using a low-temperature thermal evaporation method is reported. The samples were fabricated within a horizontal quartz tube under controlled supply of O₂ gas where Zn and Al powders were previously mixed and heated at 700°C. This allows the reactant vapors to deposit onto the substrate placed vertically above the source materials. Both the undoped and doped samples were characterized using scanning electron microscopy (SEM), field emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectroscopy (EDX), high-resolution transmission electron microscopy (HRTEM) and photoluminescence (PL) measurements. It was observed that randomly oriented nanowires were formed with varying nanostructures as the dopant concentrations were increased from 0.6 at.% to 11.3 at.% with the appearance of ‘pencil-like’ shape at 2.4 at.%, measuring between 260 to 350 nm and 720 nm in diameter and length, respectively. The HRTEM images revealed nanorods fringes of 0.46 nm wide, an equivalent to the lattice constant of ZnO and correspond to the (0001) fringes with regard to the growth direction. The as-prepared Al:ZnO samples exhibited a strong UV emission band located at approximately 389 nm (E _g  = 3.19 eV) with multiple other low intensity peaks appeared at wavelengths greater than 400 nm contributed by oxygen vacancies. The results showed the importance of Al doping that played an important role on the morphology and optical properties of ZnO nanostructures. This may led to potential nanodevices in sensor and biological applications.     

Catalyst-free synthesis of ZnO nanorod arrays on InP (001) substrate by pulsed laser deposition

High-density well-aligned ZnO nanorod arrays were successfully fabricated on ZnO a seed-layer coated InP (001) substrate by using pulsed laser deposition (PLD) technique without metal catalyst. SEM image showed that uniformly distributed droplet-like ZnO seed-layer was formed on the InP wafer. Well-oriented ZnO nanorods were formed perpendicular to the seed-layer coated substrate and well-separated from each other. X-ray diffraction θ-2θ scanning measurements demonstrated that the ZnO nanorods exhibited a strong c-axis orientation with high crystalline quality. The photoluminescence (PL) spectrum measurement illuminated that the ZnO nanorods produced in this work had well optical quality. The well-aligned and separated ZnO nanorods fabricated by this comparatively simple technique shed light on further applications for nanodevices.