圆锥形零件冲压变形与成形载荷的分析

由于悬空侧壁部分的变形状态是圆锥形零件成形的关键，而径向拉应力是实现悬空部分成形的必要条件，同时也是该部分冲压成形成败的关键为此，经力学分析得出了侧壁部分径向拉应力的解析式和造成圆锥形零件破裂的最大径向拉应力的计算式。同时分析了圆锥形零件的成形载荷。     

第三代伞状喷雾的分布特性及多片喷雾系统的应用研究

为解决前两代伞状喷雾在高背压下贯穿距不足的问题,借鉴碰撞喷雾方式,提出了第三代伞状喷雾概念。通过高速摄影对喷雾的分布特性进行了研究,结果表明:喷雾具有贯穿距可设定、扩散度高、空间分布均匀等特点。为避免碰撞后二次油束雾线相互干涉,又提出了一种多片喷雾概念,并在单缸四气门135柴油机上对多片喷雾燃烧系统进行了初步的性能试验,结果显示:系统能够有效地促进缸内均质混合气的形成;在供油提前角为19°CA时,全负荷范围内柴油机的油耗和碳烟排放均较低。     

A Draft-Tube Conical Spouted Bed for Drying Fine Particles

A study has been conducted on the performance of a draft tube conical spouted bed for drying fine particles. Batch operation has been performed with nonporous, porous, and open-sided draft tubes in order to ascertain the optimum configuration of this internal device. The nonporous draft tube requires the lowest minimum spouting velocity. Nevertheless, the solid circulation rate and the drying efficiency of the open-sided draft tube are superior to any other spouted bed configuration. Moreover, it allows for reducing the height of the fountain and, consequently, the height of the drying equipment.     

基于离散单元法的锥形双螺杆输送及混合机理分析

锥形双螺杆挤出机结构模型与其他普通螺杆挤出机相差很大且构成独特,近年来在聚合物加工行业中发挥了很大的作用。设计螺槽深度与螺杆半径比为1∶2、2∶5、1∶3的三种锥形双螺杆挤出机,通过离散单元法模拟了锥形双螺杆挤出机挤出LDPE、HDPE两种颗粒的过程,分析了锥形双螺杆挤出机螺槽内颗粒速度的变化,同时在不同参数下对三种锥形双螺杆挤出机的输送效率进行了比较。利用EDEM软件对LDPE和HDPE颗粒进行离散元分析,得出不同时刻两种颗粒在三种锥形双螺杆挤出机内的混合情况。结果表明,螺槽深度与螺杆半径比为1∶2的锥形双螺杆挤出机的混合效率优于螺槽深度与螺杆半径比为2∶5、1∶3的锥形双螺杆挤出机。     

聚合物熔体在圆锥口型的挤出胀大方程

在聚合物熔体入口收敛流变中引入纯拉伸流变概念，应用张量理论进行了定量分析，导出了一个描述圆锥口型的挤出胀大方程。研究表明，入口收敛拉伸流变，是取合物熔体产生了强烈的弹性形变，导致了较大的挤出物胀大比。     

评“异向双螺杆挤出机的发展前景”一文

本文结合Ｊ．Ｌｅｉｎｇａｒｔｎｅｒ先生的文章，从一个新的角度分析了锥形双螺杆和平行双螺杆挤出机各自的特点，对两种双螺杆挤出机作了评价。     

异向旋转双螺杆挤出机的发展前景

本文通过分析螺杆在不同区段的几何特征及其对相应加工阶段的影响对平行和锥形双螺杆挤出机进行了全面的比较。     

微小型静电泵的锥型塞阀门设计

锥形塞结构的阀门作为静电泵的出、入液体的调节机构,出、入阀门的流量是相同的,但在阀门开启状态下出、入阀门的压力差不同,这取决于出、入管道内压力。取较小者进行讨论作为结果,保证大者畅通无阻并且实现了锥塞加工尺寸一致性。根据流体力学关于流量和压力差关系,先采用流量系数0. 3计算出环隙流面积和在环隙中的流速。设定锥塞外环隙大小后,由这些数据能算出雷诺系数,再推测与其相关的流量系数为0. 26～0. 7,与计算所选用的0. 3接近或更大,说明相同的Δp条件下,能保证规定的流量及其他相关计算结果。选择合适锥塞或锥形管的锥半角,可保证锥塞外环隙流通面积恒定。     

Global optimization of tool path for five-axis flank milling with a conical cutter

In this paper, optimum positioning of the conical cutter for five-axis flank milling of slender surfaces is addressed from the perspective of approximating the tool envelope surface to the data points on the design surface following the minimum zone criterion recommended by ANSI and ISO standards for tolerance evaluation. Based on the observation that a conical surface can be treated as a canal surface, i.e. envelope surface of one-parameter family of spheres, the swept envelope of a conical cutter is represented as a sphere-swept surface. Then, an approach is presented to efficiently compute the signed distance between a point in space and the swept surface without constructing the swept surface itself. The first order differential increment of the signed point-to-surface distance with respect to the differential deformation of the tool axis trajectory surface is derived. By using the distance function, tool path optimizations for semi-finish and finish millings are formulated as two constrained optimization problems in a unified framework, and a sequential approximation algorithm along with a hierarchical algorithmic structure is developed for the optimization. Numerical examples are given to confirm the validity and efficiency of the proposed approach. Comparing with the existing approaches, the present one improves the machining accuracy greatly. The rationale developed applies to general rotary cutters.