Rogowski coil current transducer compensation method for harmonic active power error

In the harmonic active power measurement, the highest uncertainties are generally introduced by the current and voltage transducers. In a previous paper, the authors showed that the current transformer (CT) can introduce significant errors in such measurement, especially if the phase shift between voltage and current is close to ±90°. In such condition the errors on harmonic power measurement are mainly due to the CT phase displacement. This paper shows that better results can be achieved with more linear transducers, such as the Rogowski coil current transducers (RCCTs), whose metrological performance in distorted condition can be improved, by means of a proper compensation method. The proposed method for RCCTs compensation is based on the frequency response and it allows to reduce the errors on harmonic power measurement, also for phase shift close to ±90°. The study is supported by several experimental tests.     

高导电性原油电脱盐工艺研究

南阳原油中金属含量较高,掺有部分3次采油采出原油,加工时易造成电脱盐装置原油乳化,电导率高,脱盐难度较大。装置投产十几年来脱后含盐一直不合格,经过改造仍然超标,常压塔顶腐蚀严重。为此,对原油进行了电脱盐工艺条件及破乳剂研究,研制出了高效电脱盐设备和生物复合脱盐剂及降电流剂,采用平流弓形电极进行改造,解决了该原油的电脱盐问题,使脱后含盐达到3 mg/L。     

Constant thrust programming for a multistage rocket flown in vacuum with a given initial/final thrust-to-weight ratio in an arbitrary stage

The burn time and burnout velocity of a multistage rocket flown vertically in vacuum with constant thrust tangential to the flight path and a prescribed initial/final thrust-to-weight ratio in an arbitrary stage have been determined. The present paper also deals with optimal staging under given conditions of flight.     

微晶合金在电流互感器中的应用

从微晶合金的性能特点出发，分析了其在电流互感器中的应用前景。     

单片机控制泄漏电流测试仪

以8031单片机为核心的泄漏电流测试仪的硬件结构和软件设计。     

Theoretical Investigation of Time Suboptimal Control of Industrial Manipulators Along Specified Paths

A method for the time suboptimal control of an industrial manipulator from an initial position and orientation to a final position and orientation as it moves along a specified path is proposed. Nonlinear system equations that describe the manipulator motion are linearized at each time step along the path. A method which gives the control inputs (joint angular velocities) for time suboptimal control of the manipulator is developed. In the formulation, joint angular velocity and acceleration limitations are also taken into consideration. A six degree of freedom elbow type manipulator is used in numerical examples to verify the method developed.     

Pulse-Width Dependence in Current-Driven Magnetization Reversal Using GaMnAs-Based Double-Barrier Magnetic Tunnel Junction

We have investigated the current pulse width dependence on current-driven magnetization reversal in double-barrier structures using GaMnAs-based magnetic tunneling junctions (MTJ) in order to clarify the origin of low threshold current density for current-driven magnetization reversal. Comparing with the case of single-barrier MTJ, the pulse-width dependence reveals that threshold current density is reduced by double-barrier MTJ. We confirmed that the threshold current density in the order of 10⁴ A/cm² is estimated considering the effect of current pulse width.     

用于皮带及链传动的一种恒张力张紧装置

指出了皮带及链传动现有张紧方法的缺点，设计了一种结构简单、工作可靠的用于皮带及链传动的恒张力控制装置，该装置能自动调整压在皮带或链上的力，在很大挠角范围内保持其张力基本恒定。     

GaAlInP发光材料计算的经验公式

根据已经发表的实验数据，针对镓铝铟磷发光材料的提出了一组经验公式及相应的曲线，作为ＧａＡｌＩｎＰ可见光材料设计的依据或参考。     

轻便型γ能谱测井仪几个关键技术问题的探讨

为研制性能好，功能强，微机化学程度高的轻便型γ能谱测井仪，针对非油气测井工作的井口径小（〈φ６０ｍｍ）井身浅（〈１０００ｍ）等特点，探讨了γ能谱测井仪的轻便化，测量精度，信号传输技术，稳谱技术及微机化等关键技术问题。