Electrochemical synthesis and electrochromic application of a novel polymer based on carbazole

The compound containing carbazole and thiophene, named as B1 was synthesized with 4-(9H-carbazol-9-yl) phenol and 3,4-dibromo thiophene. Additionally, the electrochemical polymer of B1 was synthesized and coated onto an ITO-glass surface via electrochemical oxidative polymerization. The electrochemical synthesis of the polymer was performed both in 0.05 M LiClO₄ supporting electrolyte in AN/BF₃EtE (1:1, v/v) and an AN/LiClO₄ solvent/electrolyte solution. The compounds were characterized by FT-IR and NMR techniques. The spectroelectrochemical and electrochromic properties of this polymer were also investigated for two electrolyte solution systems. The switching ability of this polymer was measured as the percent transmittance (%T) at its point of maximum contrast. According to the electrochromic measurements, the synthesized polymer had a blue color when it was oxidized, and also when it was reduced, it had a transparent color. Additionally, redox stability measurements indicates that the polymer had a high stability and it could be used to produce new polymeric electrochromic devices and also, it was a good candidate for electrochromic devices (ECDs) applications.     

The electropolymerization of pyrrole at a CuNi electrode: corrosion protection properties

Pyrrole was successfully electropolymerized at a copper–nickel electrode in a near-neutral sodium oxalate solution containing Cu²⁺ cations to generate a homogenous and adherent polypyrrole film. The presence of the Cu²⁺ ions increased both the rate of the electropolymerization reaction and the adherence of the polymer at the CuNi interface. In the absence of these cations, oxidation of the electrode occurred generating a nickel-rich layer that was not sufficiently conducting, under the electropolymerization conditions employed, to facilitate the electron-transfer reaction and the electropolymerization of pyrrole.These films remained stable and exhibited significant corrosion protection properties in acidified and neutral 0.1 mol dm⁻³ NaCl solutions even on polarization of the electrodes to high anodic potentials.     

Mask‐free Localized Grafting of Organic Polymers at the Micrometer or Submicrometer Scale on Composite Conductors or Semiconductor Substrates

This work presents a new one‐step process enabling the mask‐free localized functionalization by organic polymers of the conducting or semiconducting parts of composite surfaces at the micrometer and submicrometer scale. The functionalization is carried out via cathodic electrografting of suitable precursors of composite cathodes, which gives an insulating polymer film strongly grafted to selected parts of the composite electrodes and guarantees that the resolution is that of the pre‐existing pattern, even when the whole surface is dipped into the reaction medium. The presumed mechanism is based on a regioselective extraction of electrons from the composite surface according to its apparent local work function in solution.     

Corrosion inhibition of stainless steel by polyaniline,poly(2-chloroaniline), and poly(aniline-co-2-chloroaniline) in HCl

Polyaniline (PANi), poly(2-chloroaniline) (PClANi), and poly(aniline-co-2-chloroaniline) (co-PClANi) films were synthesized by electrochemical deposition on 304-stainless steel (SS) from an acetonitrile solution. The structural properties of these polymer films were characterized by spectroscopic (FTIR and UV–vis) and electrochemical (cyclic voltammetry) methods. Open circuit potential–time (E_ocp–time) curves, potentiodynamic polarization, and electrochemical impedance (EIS) measurements showed that these films have significant protective performance against corrosion of SS in 0.5 M HCl solution. It was found that co-PClANi film has acted as a passivator as well as barrier for cathodic reduction reaction in a similar manner as PANi film. However, PClANi film has behaved only as barrier for corrosion protection of SS in 0.5 M HCl.     

Morphology of conducting polymeric coatings: quantitative comparison between theory and experiment

The density profile of electrosynthesized polymeric layers on carbon fibers is obtained from gravimetric and scanning electron microscopy (SEM) data. The coating density ρ is found to decrease with increasing radial distance, r, subject to the power law . Based on a modified diffusion-limited aggregation (DLA) model, it is shown that lattice Monte Carlo simulation of the coating process predicts the experimentally observed power law exponent.     

Poly(brilliant cresyl blue) electrogenerated on single-walled carbon nanotubes modified electrode and its application in mediated biosensing system

Single-walled carbon nanotubes (SWCNTs) functionalized with carboxylic acid groups were cast to glassy carbon electrode (GCE) to construct a three-dimensional nano-micro structured scaffold. Brilliant cresyl blue (BCB) was electropolymerized on the above-mentioned SWCNTs/GCE using continuous cycling between −0.7 and 0.9 V vs. SCE. PolyBCB yielded on SWCNTs/GCE exhibited the enhanced electrochemical redox behavior compared with that electrogenerated on bare GCE. The apparent surface coverage of PolyBCB obtained by SWCNTs/GCE was at least 10 times higher than that obtained by bare GCE, namely 4.8 × 10⁻⁹ and 3.6 × 10⁻¹⁰ mol cm⁻². The cyclic voltammograms recorded by PolyBCB/SWCNTs/GCE exhibited well-defined two peaks located at −0.25 V and −0.06 V, respectively, with a surface-controlled mechanism. In addition, morphologies of PolyBCB electrogenerated on GCE and SWCNTS/GCE were characterized by atomic force microscopy. Finally, this proposed PolyBCB/SWCNTs/GCE was used in the construction of the second-generation biosensors to hydrogen peroxide and glucose, with the enhanced analytical performance.     

High strain electromechanical actuators based on electrodeposited polypyrrole doped with di-(2-ethylhexyl)sulfosuccinate

The low-voltage electromechanical actuation of polypyrrole (PPy) doped with di-(2-ethylhexyl)sulfosuccinate (DEHS) has been investigated. The PPy-DEHS has been prepared both chemically (cast as films from solution) and by more conventional electrochemical polymerization. Very large strains of ∼30% were obtained during slow-scan redox cycling of the electrochemically prepared PPy-DEHS films. In constrast, PPy-DEHS films cast from solutions of the chemically polymerized polymer gave actuation strains of ∼2.5%. The polymerization method was also found to have a significant effect on the structure, conductivity and mechanical properties of the PPy-DEHS materials. The conductivity of the electrochemically polymerized PPy-DEHS was 75 S cm⁻¹, considerably higher than that found for the chemically derived polymer (7 S cm⁻¹). The structure of the PPy-DEHS was further elucidated from UV-vis, Raman and FT-IR spectral studies which indicated that the conjugation length of the PPy could be increased significantly by varying the polymerization method. Films obtained by casting chemically prepared PPy-DEHS showed higher modulus (2.3 GPa) than electropolymerized PPy-DEHS (0.6 GPa), but were more brittle. Both materials were electroactive in acetonitrile/water electrolyte. The higher actuation strain observed in the electrochemically prepared films was attributed to a more open molecular structure (as indicated by the lower modulus) allowing for easier ion diffusion and a higher conductivity allowing easier charge transfer.     

A sensitive and selective sensor for dopamine determination based on a molecularly imprinted electropolymer of o-aminophenol

A simple and reliable method was proposed for preparing a selective dopamine (DA) sensor based on a molecularly imprinted electropolymer of o-aminophenol. The sensor is selective for the determination of DA in the presence of high concentrations of ascorbic acid (AA), with a maximum molar ratio of 1/1000. The molecular imprinted (MIP) sensor was tested by cyclic voltammetry (CV) as well as differential pulse voltammetry (DPV) to verify the changes in oxidative currents of ferricyanide. In optimized conditions, DA at concentrations of 2 × 10⁻⁸ to 0.25 × 10⁻⁶ mol/L could be determined with a detection limit of 1.98 × 10⁻⁹ mol/L (S/N = 3). The MIP sensor showed high selectivity, sensitivity, and reproducibility. Determination of DA in simulated samples of dopamine hydrochloride showed good recovery.     

Electrochemical synthesis,characterization and capacitive properties of novel thiophene based conjugated polymer

In this paper, a novel thiophene based monomer, 1-(pyren-1-yl)-2,5-di(thiophen-2-yl)-1H-pyrrole, PThP, was synthesized and characterized by ¹H NMR and ¹³C NMR spectroscopic methods. The electrochemical behavior and electropolymerization of this novel monomer were performed on pencil graphite electrode (PGE) by cyclic voltammetry. The effect of solvent, dopant, scan number and scan rate on the electropolymerization and properties of the conjugated polymer films were investigated. The capacitive properties of the poly(PThP) films were tested by electrochemical impedance spectroscopy (EIS). The highest specific capacitance value was calculated for the conjugated polymer modified PGE that was obtained in 0.1 M tetrabutylammonium perchlorate/dichloromethane solution for 30 cycles at 25 mV/s scan rate as 25.45 mF cm⁻². The surface morphologies of the conjugated polymer modified electrodes were determined by scanning electron microscopy (SEM).