Burner Performance Evaluation Using Test Code

Development of new burner technology is common practice nowadays. Standardized test codes are available to conduct tests to determine operating characteristics and thermal performance of different parts of steam generating units. This paper describes the results of testing performed to evaluate thermal efficiency of a 74.5?kW fire-tube steam generator fired with a new premixed flame burner in comparison to a typical standard-retrofit diffusion flame burner system. Two premixed flame burners sized at 7.6 and 10.1?cm were tested. Testing was performed in accordance with the ASME PTC 4.1 Power Test Code. The evaluation was conducted in the range of small- to mid-sized, natural gas-fired applications, from 1.06?to?2.64×106?kJ/h. The environmental nitrogen oxide (NOx) emissions performance was also compared for both burner technologies. The results of this evaluation indicate that firing the test boiler with the 7.6?cm new burner slightly improves unit thermal efficiency by 4.0–3.3% for a unit load ranging from approximately 1.06?to?1.79×106?kJ/h, respectively. Operation with the 10.1?cm new burner improves the thermal efficiency by approximately 1.6% at 2.32×106?kJ/h. The uncertainty in the measurements used in the efficiency calculations should account for approximately ±1.5% uncertainty in the reported gross efficiency. Reductions in NOx emissions of the order of 10% resulted from operation with the new premixed flame burners.     

On-line emission and economic load dispatch using adaptive Hopfield neural network

This paper presents an adaptive Hopfield neural network (AHNN) based methodology, where the slope of the activation function is adjusted, for finding approximate Pareto solutions for the multi-objective optimization problem of emission and economic load dispatch (EELD). We have placed emphasis on finding solutions quickly, rather than the global Pareto solutions, so that our algorithm can be employed in large on-line power systems where variations in load are quite frequent. To enable faster convergence, adaptive learning rates have been developed by using energy function and applied to the slope adjustment method. The proposed algorithm has been tested on selected IEEE bus benchmark systems. The convergence of AHNN is found to be nearly 50% faster than the non-adaptive version.     

场发射显示器件中真空获得和维持工艺的改进

真空的获得和维持是目前FED研究工作中存在的主要困难之一。本文研究了在现有的传统封接排气以及消气工艺的实验条件下 ,进行了多种工艺改进 :设计了一种新型的三层FED器件结构 ,在这种结构中 ,实现了蒸散型消气剂和非蒸散型消气剂的共同使用 ;并采用了气体保护 ,以及电子轰击去气等有效措施 ,实现了FED器件内部持久的高真空度 ,为FED阴极高稳定、长寿命工作提供了有力的保障     

场发射显示器支撑墙机械强度的计算与分析

计算了几种不同材料支撑墙在不同承压和允许倾斜角度范围内的应力和形变分布。计算结果表明 ,采用热压氮化硅或氧化锆陶瓷制作的支撑墙具有足够高的机械强度 ,是支撑墙材料的较好选择。     

焦炉装煤烟尘治理的烟气量计算

通过对焦炉装煤烟尘治理的烟气量计算和研究,提出不同治理系统的烟气量计算方法及应采取的措施。     

Emission Of Volatile And Semivolatile Organic Compounds From Waterborne Paints – The Effect Of The Film Thickness

A waterborne paint was applied to tin plated steel sheets with three different film thicknesses. The emission of volatile and semivolaile organic compounds ((S) VOCs) from the samples was measured in small climatic chambers under standard conditions over a two-week period. The purpose of the study was to evaluate the effect of the film thickness on the emission rate decay. First order decay models, including sink effects for the high boiling (S) VOCs, were fitted to the concentration versus time data. The results showed that the first order rate constants decrease with increasing film thickness. In uddition, the results indicated that the emissions of the (S)VOCs in the waterborne paint film seemed to be controlled by evaporation. The thicknesses of paint films used in climatic chamber tests to estimate emission rates for product compurison or emission prediction must be known in order to prevent erroneous conclusions     

Design and Characterization of the CLIMPAQ,Chamber for Laboratory Investigations of Materials,Pollution and Air Quality*

A test chamber has been developed in order to provide a small and simple emission testing facility capable of testing construction products in a climate where the important climatic parameters such as temperature, ventilation rate and air velocity can be varied independently around typical indoor values. The test chamber CLIMPAQ is made of panes of window glass. Other main surface materials are stainless steel and eloxated aluminium. The chamber has a volume of 50.9 litres and is designed to meet the requirements for quantifying air pollution. In this investigation human subjects acted as air pollution judges, and chemical characterization of the air pollution was carried out. Carpet, linoleum, wall paint and seal- ant were tested simultaneously in the CLIMPAQ and in four other chambers ranging from a full-scale chamber of 28 m³ to a field and laboratory emission cell of 3.5· 10^?5m³. Product ranking is the same in all chambers for the sensory measurements. Emission rates based on sensory measurements differ for all products less than 100 % except for tests in a 3-litre chamber where emission rates were higher. Chemical measurements differ up to approximately 10 times for the same product in different chambers. Deviations appear to be the result of different environmental parameters in the various chambers. Low air concentrations or high specific ventilation rates seem to increase emissions, while differences in air velocities and sink properties may also be the cause of differences in emission rates.     

内热式液态合金离子源

本文介绍了一种实用的液态合金离子源结构，我们利用本结构研制成功了Ａｕ－Ｓｉ和Ａｕ－Ｓｉ－Ｂｅ液态合金离子源，测出了它们的发射特性。     

基于AE的砂轮智能修整技术研究

本文基于声发射(AE,Acoustic Emission)研究了高精度磨削过程中砂轮的在线智能修整技术。在分析砂轮磨损和修整机理的基础上探讨了声发射技术在砂轮磨损检测中的应用,着重研究了砂轮修整过程中砂轮修整进给量的控制、运动的控制、AE在线智能修整系统的流程和砂轮在线智能补偿的分析。     

Kinetic and spectral aspects in chemiluminescence system Eu(III)/HCO3/H2O2

Chemiluminescence (CL) of the systems containing Eu₂⁺ or HCO₃⁻ ions and hydrogen peroxide was studied. The kinetic curves and CL emission spectra of the systems were discussed. The emission spectrum of the system containing carbonates revealed two emission maxima: the first directly after initiation of the reaction by hydrogen peroxide and the second in several seconds after the first. On the basis of the characteristic bands in the CL spectrum the emitters in the system Eu₂⁺/HCO₃⁻/H₂O₂ were identified as: excited Eu³⁺ ions and excited products of carbonate decomposition. The emission bands for λ=600 and 420 nm appeared in a time distance of a few ten seconds.