A Highly Sensitive,Reversible, and Bidirectional Humidity Actuator by Calcium Carbonate Ionic Oligomers Incorporated Poly(Vinylidene Fluoride)

Sensitivity and multi-directional motivation are major two factors for developing optimized humidity-response materials, which are promising for sensing, energy production, etc. Organic functional groups are commonly used as the water sensitive units through hydrogen bond interactions with water molecules in actuators. The multi-coordination ability of inorganic ions implies that the inorganic ionic compounds are potentially superior water sensitive units. However, the particle forms of inorganic ionic compounds produced by classical nucleation limit the number of exposed ions to interact with water. Recent progress on the inorganic ionic oligomers has broken through the limitation of classical nucleation, and realized the molecular-scaled incorporation of inorganic ionic compounds into an organic matrix. Here, the incorporation of hydrophilic calcium carbonate ionic oligomers into hydrophobic poly(vinylidene fluoride) (PVDF) is demonstrated. The ultra-small calcium carbonate oligomers within a PVDF film endow it with an ultra-sensitive, reversible, and bidirectional response. The motivation ability is superior to other bidirectional humidity-actuators at present, which realizes self-motivation on an ice surface, converting the chemical potential energy of the humidity gradient from ice to kinetic energy.     

Large Area Self-Assembled Ultrathin Polyimine Nanofilms Formed at the Liquid–Liquid Interface Used for Molecular Separation

Separation membranes with higher molecular weight cut-offs are needed to separate ions and small molecules from a mixed feed. The molecular sieving phenomenon can be utilized to separate smaller species with well-defined dimensions from a mixture. Here, the formation of freestanding polyimine nanofilms with thicknesses down to ≈14 nm synthesized via self-assembly of pre-synthesized imine oligomers is reported. Nanofilms are fabricated at the water–xylene interface followed by reversible condensation of polymerization according to the Pieranski theory. Polyimine nanofilm composite membranes are made via transferring the freestanding nanofilm onto ultrafiltration supports. High water permeance of 49.5 L m^-2 h⁻¹ bar⁻¹ is achieved with a complete rejection of brilliant blue-R (BBR; molecular weight = 825 g mol⁻¹) and no more than 10% rejection of monovalent and divalent salts. However, for a mixed feed of BBR dye and monovalent salt, the salt rejection is increased to ≈18%. Membranes are also capable of separating small dyes (e.g., methyl orange; MO; molecular weight = 327 g mol⁻¹) from a mixed feed of BBR and MO. Considering a thickness of ≈14 nm and its separation efficiency, the present membrane has significance in separation processes.     

The effects of glycol methacrylate as a dehydrating agent on the dimensional changes of liver tissue

The dimensional changes of liver sections during the course of processing with glycol methacrylate (GMA) or with ethanol are described. Tissue processing with ethanol served as a control. During prolonged processing steps (24 h each), linear shrinkage of tissue specimens dehydrated with GMA at room temperature was 13.2%. Subsequent infiltration with GMA resulted in trivial swelling, and polymerization in slight shrinkage (2.3%). In comparison, processing with cold GMA resulted in shrinkage during dehydration (about 10.8%), a slight swelling in pure GMA, followed by shrinkage during polymerization (2.2%). Short routine processing schedules resulted in similar shrinkage/swelling patterns, although precise values differed slightly. In all experiments, ethanolic dehydration resulted in smaller dimensional tissue changes than did GMA dehydration. The dimensional changes of tissue sections during stretching on water, mounting and drying compensated for the major part of the shrinkage manifested during processing.     

Hydrolytic stability and protective properties of polyurethane oligomers based on polyester/ether/polyols

The present study deals with effect of the type and chemical character of incorporated polyester/polyether blocks on the hydrolytic stability of crosslinked polyurethane oligomers. Diffusion parameters of the investigated polyurethane oligomers, giving information concerning chemical changes taking place in neutral, basic and acidic aqueous environments, have also been determined.     

SnO催化合成环烷酸乙二醇酯增塑剂的研究

介绍了用SnO非酸性催化剂催化合成环烷酸乙二醇酯增塑剂(NAEP)的方法。讨论了反应温度、醇酸摩尔比、催化剂用量和反应时间等因素对酯化反应的影响,给出了适宜的工艺条件。 NAEP应用于PVC电缆料及丁腈橡胶配方中取得了良好的效果。与邻苯二甲酸酯增塑剂相比,具有更好的经济价值。     

Fractionation of partially stereoregular poly(propylene oxide)

Partially stereoregular poly(propylene oxide) samples were synthesized via reactions catalysed by a preformed analytically defined trimethylaluminium hydrolysate. These samples were fractionated into two contrastingly different fractions.

1. (i) D-polymers: This fraction constituted the major part (up to 90%). It mainly contained cyclic low molecular weight oligomers (MW < 1000). The linear chains found in D-polymers had hydroxyl end groups. No double bonds could be detected spectroscopically.

2. (ii) K-polymers: This fraction was high molecular weight stereoregular polymer. Stepwise thermal precipitation from dilute isooctane solution of K-polymers yielded a succession of fractions which differed in melting point. It appears that the phase equilibria during the thermal precipitations were not controlled by the molecular weights of species.

Hydrosilylation and dehydrocondensation reactions of methylhydridesiloxane to acrylic and methacrylic acids

The hydrosilylation of α,ω‐bis(trimethylsiloxy) methylhydridesiloxane (degree of polymerization ≈ 53) with acrylic and methacrylic acid with various ratios of the initial compounds, in the presence of platinum hydrochloric acid, has been investigated. In the presence of platinum hydrochloric acid, competitive dehydrocondensation reactions take place with the formation of various oligomers with various chemical links. In the later stages of the reaction, three‐dimensional systems have been obtained. During dehydrocondensation, the reaction order, reaction rate constants, and activation energy have been determined. The structures of the synthesized oligomers have been determined with IR and NMR spectroscopy data. Gel permeation chromatography, differential scanning calorimetry, and X‐ray analyses of the synthesized oligomers have been carried out. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3243–3252, 2007     

二甘醇或乙二醇连续催化合成1，4－二氧六环

采用连续法合成１，４ 二氧六环。以二甘醇为原料，温度２４０℃，催化剂初始浓度：硅钼酸３％，或硫酸铁３％，或硅钨酸银２％；连续补加浓度：硅钼酸１％，硫酸铁１％，硅钨酸银０５％；以乙二醇为原料，温度１９０℃，催化剂初始浓度：硅钼酸４％，或硫酸铁３５％，或硅钨酸银２％；补加浓度：硅钼酸１５％，硫酸铁１５％，硅钨酸银１％；控制塔顶温度为９５～１０５℃，反应速度快，产率较高。     

Enzyme‐catalyzed hydrolysis of poly(ethylene terephthalate) cyclic trimer

Oligoesters present in poly(ethylene terephthalate) fibers are commonly extracted from the fiber during processing, such as aqueous‐based dyeing. Aqueous, insoluble oligoesters, particularly cyclic trimers that precipitate on processing machinery and on the fiber surface are difficult to remove under benign conditions. Reported is a new method for the efficient removal of cyclic trimer by enzyme‐catalyzed hydrolysis. Almost complete hydrolysis of trimer was accomplished at pH 8 and 60°C. Effects of time, agitation, surfactant, and enzyme and trimer concentrations on the efficiency of hydrolysis are reported. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2545–2552, 2003     

Properties and crystallization kinetics of poly(ether ether ketone)‐co‐poly(ether ether ketone ketone) block copolymers

A series of block copolymers composed of poly(ether ether ketone) (PEEK) and poly(ether ether ketone ketone) (PEEKK) components were prepared from their corresponding oligomers via a nucleophlilic aromatic substitution reaction. Various properties of the copolymers were investigated with differential scanning calorimetry (DSC) and a tensile testing machine. The results show that the copolymers exhibited no phase separation and that the relationship between the glass‐transition temperature (T_g) and the compositions of the copolymers approximately followed the formula T_g = T_g1X₁ + T_g2X₂, where T_g1 and T_g2 are the glass‐transition‐temperature values of PEEK and PEEKK, respectively, and X₁ and X₂ are the corresponding molar fractions of the PEEK and PEEKK segments in the copolymers, respectively. These copolymers showed good tensile properties. The crystallization kinetics of the copolymers were studied. The Avrami equation was used to describe the isothermal crystallization process. The nonisothermal crystallization was described by modified Avrami analysis by Jeziorny and by a combination of the Avrami and Ozawa equations. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 1652–1658, 2005