芝麻营养原液的开发与研究

本文对芝麻营养保健成分的提取进行了系统的研究。确定了芝麻营养原液的制取工艺。为充分发挥芝麻的营养保健作用开辟了新的途径。     

Influence of protein and lipid concentration of the test lubricant on the wear of ultra high molecular weight polyethylene

To gain a better understanding of the ultra-high molecular weight polyethylene (UHMWPE) wear mechanism in the physiological environment, the effects of protein and lipid constituents of synovial fluid on the specific wear rate of UHMWPE were examined experimentally. The multidirectional sliding pin-on-plate wear tester was employed to simulate the simplified sliding condition of hip joint prostheses. Bovine serum γ-globulin and synthetic l--DPPC were used as model protein and lipid constituents of synovia, respectively. Results of the wear test indicated that the UHMWPE wear rate primarily depended on the protein concentration of the test lubricant. Lipids acted as a boundary lubricant and reduced polyethylene wear in the low protein lubricants. However, the polyethylene wear rate increased with increasing lipid concentrations if the protein concentration was within the physiological level. Increased interactions between protein and lipid molecules and lipid diffusion to polyethylene surface might be responsible for the increased wear.     

冰蓄冷系统运行经济性分析

建筑物的空调制冷系统采用蓄冷方式，可以节约运行费用，减少设备容量，转移用电高峰。蓄冷空调系统与常规空调系统相比，在运行的经济性方面有很多优点。因此开发了冰蓄冷系统运行经济性分析计算机软件，应用这套软件对实际工程项目进行分析，计算出各种冰蓄冷系统与相应常规系统的逐时耗电量、电费、全年运行费用和设备容量减少率等，并以图表的方式对两种系统的经济性作出综合的比较，能全面、直观的显示冰蓄冷系统的优点。     

Highly oriented star-like patterns observed on GaSe epilayers grown on Si(111)

Epitaxial lamellar gallium selenide (GaSe) semiconductors have been grown on trench-patterned silicon (Si) substrates by molecular beam epitaxy. An intriguing star-like patterned morphology was identified by atomic force microscopy on these epilayers. This non-trivial feature can be correlated with the accumulation of stacking faults of two concurrent epitaxial domains around self-oriented triangular pits developed earlier on the Si(111) surface by the chemical etching. Crystallographic considerations show how the stars can be formed.     

Recrystallization of phenylbutazone using supercritical fluid antisolvent process

Phenylbutazone was recrystallized from its solutions by using a supercritical fluid antisolvent process. It was dissolved in acetone and supercritical carbon dioxide was injected into the solution, thereby inducing supersaturation and particle formation. Variation in the physical properties of the recrystallized phenylbutazone was investigated as a function of the crystallizing temperature and the carbon dioxide injection rate. The recrystallized particles showed cleaner surfaces and more ordered morphology compared to the particles obtained by other methods such as solvent evaporation. X-ray diffraction patterns indicated that the crystallinity of the particles had been modified upon the recrystallization. Differential scanning calorimetry measurement revealed that the crystallizing temperature influenced the thermal stability of the resulting crystals. Larger crystals were produced when the carbon dioxide injection rate was reduced.     

Experimental Study of Ice Jam Thickening under Dynamic Flow Conditions

River ice jams are a common occurrence on northern rivers, and their formation can present a severe flood risk to nearby communities. As more and more river regulation projects are developed to provide an alternative to fossil fuels for electrical power-generating capacity, our need to understand the mechanisms associated with ice jam formation under variable flow conditions becomes more vital. This is because, at present, hydropeaking operations are often severely curtailed during the ice-affected seasons due to concerns that sudden flow fluctuations might instigate ice jams and associated flooding. Here, an experimental investigation explores the effects of rapid increases in discharge on ice jam formation and evolution. It is found that the thickness of ice jams formed under highly dynamic flow conditions tend to be slightly thinner than those formed during steady carrier flows for comparable discharges. Also, despite the highly dynamic nature of these consolidation events, the resulting ice thicknesses appear reasonably well approximated by steady flow theory.     

Formation of C49-TiSi2 in flash memories: a nucleation controlled phenomenon?

The formation of Ti silicides has been examined in flash memories with 0.25 μm linewidth by X-ray diffraction, scanning electron microscopy, and transmission electron microscopy. It has been observed that, after the first rapid thermal process and the selective metal etch, there is no silicide on the source and on a majority of drain contacts while C49-TiSi₂ is found on the gate. A pre-amorphisation implant increases drastically the formation of C49-TiSi₂ in the drain zone while modifications of annealing conditions have little impact. These results indicate that the formation of C49-TiSi₂ is most likely controlled by nucleation and that this nucleation is sensitive to both the width and the length of the reaction zone. The formation of a Ti rich silicide may play an important role in this nucleation by decreasing the driving force for the formation of C49-TiSi₂. Curiously enough, the formation of C49-TiSi₂ appears thus as a major concern for the salicide process in flash memories.     

用凯氏定氮仪测定蛋白质结果的不确定度评定

本文列出影响用凯氏定氮仪测定蛋白质结果的因子,依据测量不确定度评定规范,尝试对测定蛋白质结果不确定度的评价。     

国际乳业的热点论题：蛋白质标准化

介绍了蛋白质的标准化这一国际乳品界正热的研究和讨论题目，综述了蛋白质标准化的必要性和世界上目前采用的方法，展望了膜技术在蛋白质标准化上的应用前景。     

Continuous formation of slurry ice by cooling water–oil emulsion in a tube

Water-silicone oil emulsion with an additive, (C₂H₅O)₃SiC₃H₆NH₂, was examined as a heat storage material. A spiral tube used as a heat exchanger was immersed in a low temperature bath and the emulsion was circulated in the tube to make ice continuously. Ice was separated from the ice–liquid suspension in an outlet tank. The amount of formed ice, the temperatures of the inlet and the outlet of the heat exchanger, and the temperatures in the tube wall were measured and the overall heat transfer coefficient and the heat flux through the tube were calculated. Experiments were carried out, varying the flow rate, the temperature of cooling brine, and the thickness of tube wall. The condition under which slurry ice was formed continuously without adhesion of ice to the cooling wall was clarified. Though decrease in the thermal resistance of the tube increased the rate of ice formation or raised the brine temperature, it narrowed the range of the flow rate and of the brine temperature in which slurry ice was formed continuously.