低旋流进气直喷燃烧系统在195柴油机上的应用研究

介绍了低旋流进气直喷燃烧系统应用于１９５柴油机的试验结果，着重探讨了燃烧室结构尺寸和供油系统主要参数对柴油机性能和燃烧放热规律的影响。研究表明，这种燃烧系统应用于小缸径直喷柴油机具有良好的推广前景。     

北京地区膳食摄入^232Th吸收入体液份额f1值的探讨

从北京地区公众成年人~(232)Th 的膳食日食入量,空气日吸入量,以及骨中~(232)Th 的沉积量出发,利用 ICRP 30号报告中参考人的代谢参数和内照射的库室模型,估算了北京地区公众成年人膳食摄入~(232)Th 后经胃肠道向体液转移份额 f_1值。结果表明,对于公众中成年人0.005是 f_1值的合适代表值,是 ICRP 30号报告推荐值 f_1=0.0002的25倍。虽然 ICRP 推荐值并不用于公众,但可以对群体有所了解;而北京地区从实测数据资料出发导出的 f_1值可能是更适于公众的。     

Aluminium content of Spanish infant formula

Levels of aluminium in 82 different infant formulae from nine different manufacturers in Spain were determined by acid-microwave digestion and graphite furnace atomic absorption spectrophotometry. The influence of aluminium content in tap water in reconstituted powder formulae was examined and an estimate was made of the theoretical toxic aluminium intake in comparison with the provisional tolerable weekly intake (PTWI). Possible interactions between aluminium and certain essential trace elements added to infant formulations have been studied according to the type or main protein-based infant formula. In general, the infant formulae contained a higher aluminium content than that found in human milk, especially in the case of soya, preterm or hydrolysed casein-based formulae. Standard formulae gave lower aluminium intakes amounting to about 4% PTWI. Specialized and preterm formulae resulted in a moderate intake (11-12 and 8-10% PTWI, respectively) and soya formulae contributed the highest intake (15% PTWI). Aluminium exposure from drinking water used for powder formula reconstitution was not considered a potential risk. In accordance with the present state of knowledge about aluminium toxicity, it seems prudent to call for continued efforts to standardize routine quality control and reduce aluminium levels in infant formula as well as to keep the aluminium concentration under 300 μg l^-1 for all infant formulae, most specifically those formulae for premature and low birth neonates.     

用潜坝对抚州市南区水厂取水口淤沙进行治理

多沙河流中的水厂取水口，枯水期经常存在淤沙，影响抽水。以往的治理方法多是采用丁坝群束水冲沙，但坝田淤高有碍行洪，对城市防洪不利．南区水厂采用潜坝方案，兼顾防洪．通航等要求，缩小治理范围，用十分简易的方法获得成功，且投资更省，值得在类似工程中推广运用．     

Chlorophyll and plankton of the Gulf coastal waters of Saudi Arabia bordering a desalination plant

As on land, plants are the real producers in the sea, and on them depend all marine living resources and the basic sustainability of ecosystems. Primary production is performed by chlorophyll-bearing plants ranging from the tiny phytoplankton to the giant kelps through the process ofphotosynthesis. Zooplankton play an important role as secondary producers, and together with phytoplankton they support the vast assemblages of marine food chain with all their diversity and complexity. Data on chlorophyll pigments, phytoplankton and zooplankton are regarded as a sound basis for environmental appraisal of ecosystems. This paper presents a set of data collected from the Saudi Arabian coastal waters near the desalination plants in AI-Jubail. Materials were collected from six different sites covering the intake and discharge zones during cruises carried out in 1997-1998. Analyses of chlorophyll pigments were made using the spectrophotometric method. Plankton samples were collected using a Nansen plankton net with a mesh size of 75 μ and analyzed following standard procedures. Chlorophyll a, b, c and phaeophytin are the most commonly occurring pigments in seawater. Their concentrations showed wide fluctuation. The phytoplankton community was composed of 35 genera representing the Diatoms, Dinoflagellates and blue- green algae. Zooplankton were composed ofProtozoa, Coelenterata, Ctenophora, Aschelminthes, Annelida, Mollusca, Arthropoda, Echinodermata and Chordata. Arthropoda, represented by Cladocera, Copepoda and Crustacean larvae, formed the largest group followed by Chordata. The distribution of phyto- and zooplankton was examined and discussed on a seasonal, annual and inter-annual basis. In terms of species, overall species composition was not affected by plant discharge. The study brings out a greater understanding of the changes experienced by biotic communities as a result of impingement, entrainment and entrapment consequent to water passage through the plant structures. The study reflects the ecological relationships that the phytoplankton and the zooplankton of the region possess with respect to intake and discharge. Further, the study has brought to light a very redeeming feature of the ecosystem to sustain its productivity and planktonic abundance. It was observed that seawater temperature, conductivity and total suspended solids did not act as limiting factors. Besides throwing much light on the little known biological aspects of desalination sites, the data provided constitute a significant addition to the knowledge base of marine living resources in an industrial zone of Gulf coastal waters.     

基于全可变气门汽油机进气量测量和控制问题研究

基于全可变气门运动机构的气门参数控制燃烧技术是改善传统SI汽油机燃油经济性,提高动力性和降低排放的最为有效的途径之。但是这也对发动机进气量的测量和控制提出了更高的要求。本文通过仿真和试验相结合的方法,对基于全可变气门机构汽油机进气量测量和控制问题进行了探讨和研究。     

Foraging mechanisms of age-0 lake trout (Salvelinus namaycush)

Reaction distances under various light intensities (0-19 uE/m2/s), angles of attack, swimming speeds, and percentage of overall foraging success were measured. Extensive efforts have been invested in restoring lean lake trout (Salvelinus namaycush) populations in the Laurentian Great Lakes, but successful natural recruitment of lake trout continues to be rare outside of Lake Superior and parts of Lake Huron. There is evidence of high mortality during the first several months after eggs hatch in the spring, but little is known about the foraging mechanisms of this age-0 life stage. We developed a foraging model for age-0 lake trout (S. namaycush) in response to amphipods (Hyalella azteca) and mysids (Mysis diluviana) by simulating underwater environmental conditions in the Great Lakes using a temperature-controlled chamber and spectrally matched lighting. Reaction distances under various light intensities (0–19 uE/m²/s), angles of attack, swimming speeds, and percentage of overall foraging success were measured. Intake rates under different light intensities and prey densities were also measured. Age-0 lake trout were non-responsive in the dark, but were equally responsive under all light levels tested. Age-0 lake trout also demonstrated a longer reaction distance in response to moving prey, particularly mysids, which had an escape response that reduced overall foraging success. We determined that prey intake rate (numeric or biomass) could be modeled most accurately as a function of prey density using a Michaelis–Menton equation and that even under low mysid densities (3 individuals/m²), age-0 lake trout could quickly satisfy their energetic demands in a benthic setting.     

新型空气动力发动机进气门的研究

为实现气动发动机利用外界较高压力空气推动气缸内活塞并对外输出动力,本文设计一种利用电磁装置的新型进气门结构,它结构简单,能够实现对大流量高压气体的流量调节,使其能很好的满足气体发动机的工作要求。     

气门淬火层深一致性差原因分析一例

本文通过一款轻型客车进气系统噪声优化设计的案例,详细介绍了轻型客车进气系统气动噪声、结构辐射噪声的优化过程和分析方法,提出了一些进气系统设计过程中需要关注的方向,对进气系统的噪声控制和结构改进具有一定的指导作用。     

轿车进气歧管成型工艺与成套注塑模具设计

以发动机进气歧管为例,在详细分析组成进气歧管的底壳和面盖结构、注塑成型材料及各塑件壁厚,运用MFI 2015分别对底壳和面盖最佳浇口位置进行了仿真分析。针对底壳和面盖质量不同、壁厚不同、成套生产而各个制品的壁厚必须均匀、有隔离凸台和众多加强筋等特点,确定本注塑模具采用三浇口+热流道+冷流道组成的混合式浇注系统方案;运用MFI对影响产品品质的充填时间、速度/压力切换时的压力、模流末端压力、流动前沿温度、锁模力、气穴、熔接线、缩痕等进行了详细分析与探讨;运用UG软件对模具型腔、型芯,底壳上方形管口A的成型,顶出与加强支承结构、模具整体等进行了分析设计。创造性地使用了由导柱导套+圆锥定位+方形块定位+楔紧镶块+厚薄调整垫组成的"五位一体"精度保证与保持系统,同时也使用了厚度调整垫,保证了型腔型芯的组合和开合模的精准。经生产证明:模具结构合理、动作可靠、产品成型完整、质量达到设计要求。