微球聚焦测井仪小极板的理论及实验研究

本文对微球聚焦测井仪小极板进行研究，利用有限元法计算了小极板的均质及非均质Ｋ值，并与实验结果进行了比较，结果表明理论值怀实验值吻合较好，说明了理论计算的正确性，给出了对应于小极板的泥饼校正图版及屏流比曲线，对小极板的推广应用有实用价值。     

薄壁圆筒试样的扭转断裂曲线

通过比较多种材料的光滑薄圆筒和切口薄壁圆筒试样的扭断裂曲线，测向两种试验的断裂韧性ＫＩＩＣ相同，从而间接证实了利用光滑薄壁筒测定延性金属断裂韧性ＫＣ方法的正确性。     

对国际岩石力学委员会J_V公式的质疑

通过对国际岩石力学委员会JV 公式的论证 ,指出了该公式不符合数理逻辑。结合工程勘察实践 ,拟建了Ky新公式 ,提高了工程岩体完整程度评价方法的科学性。     

Gold Medal Award for Life Achievement in Psychology in the Public Interest.

Announces the 2007 recipient of the Gold Medal Award for Life Achievement in the Psychology in the Public Interest: Rhoda K. Unger. A brief biography, highlighting areas of special focus in Unger's work, is provided. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Formation of steady state size distribution of precipitates in alloys under cascade-producing irradiation

The effect of coherency loss on the development of precipitate size distribution under cascade-producing irradiation is considered. The nucleation of coherent precipitates, their growth followed by coherency loss and cascade-induced dissolution of large incoherent precipitates can occur simultaneously resulting in formation of a quasi-stationary size distribution of semicoherent precipitates. To describe this process we consider co-evolution of a mixed population of coherent, semicoherent and incoherent precipitates. Mathematically, the problem is formulated as a set of discrete rate equations of nucleation kinetics (the Master equation approach) which is also used for later stages of evolution. To solve the corresponding large set of equations (typically, more than 10⁵ equations) an efficient numerical method is developed. The simulation results obtained for material parameters and irradiation conditions typical for nuclear reactors show that the coherency loss affects considerably evolution of the precipitate population. Under certain irradiation conditions, both in solution-annealed alloys and in aged ones, the mean precipitate size and the number density during prolonged irradiation tend to steady state values, whereas the size distribution function of large precipitates narrows. The width of the quasi-stationary size distribution is controlled by cascade parameters. It was found that the asymptotic quasi-stationary state of the precipitate population may depend on initial state of the alloy.     

Corrosion Behavior of a Sputtered K38G Nanocrystalline Coating with a Solid NaCl Deposit in Wet Oxygen at 600 to 700°C

A nanocrystalline coating of K38G alloy was obtained by means of magnetron sputtering. The corrosion behavior of cast K38G alloy and its sputtered nanocrystalline coating with a solid NaCl deposit in dry air or wet oxygen at 600 and 700°C have been studied and compared. The results indicated that the mass gain of the coating is higher than that of the cast alloy at 600 and 700°C. Therefore, nanocrystallization reduced the corrosion resistance at these temperatures. Furthermore, the mass gains of the coating and the cast alloy with a NaCl deposit in wet oxygen were less than that with a NaCl deposit in dry air. The relevant corrosion mechanisms are discussed.     

K418B合金细晶铸造整体涡轮真空热处理工艺研究

通过力学性能评估和金相组织观察，研究五种热处理制度，两个周期的试验结果，确定了Ｋ４１８Ｂ合金细晶铸造整体涡轮的真空热处理工艺。     

Marcia K. Johnson: 2006 Award for Distinguished Scientific Contributions.

Presents the citation to Marcia K. Johnson, who received the Award for Distinguished Scientific Contributions "for raising and illuminating fundamental questions about the cognitive and neural processes that constitute the subjective experience of mental life." A brief profile and a selected bibliography, as well as Johnson's award address, entitled Memory and Reality (see record 2006-21079-028), accompany the citation. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

K_2O－B_2O_3－SiO_2玻璃成分对析晶性能的影响

本文利用ＤＴＡ、ＸＲＤ、ＴＥＭ、ＳＥＭ等技术研究了三种Ｋ２Ｏ－Ｂ２Ｏ３－ＳｉＯ２玻璃的析晶性能。结果表明，Ｋ２Ｏ－Ｂ２Ｏ３－ＳｉＯ２玻璃的析晶由分相引起，分相和析晶能力受成分影响较大。随Ｂ２Ｏ３和Ｋ２Ｏ含量增多及Ｋ２Ｏ／Ｂ２Ｏ３比值的降低，析晶加强。析晶中主晶相类别尚未查清，次晶相确定为α－方石英。     

20K以下温区单级脉管制冷机直流控制实验研究

开展了20K以下温区单级脉管制冷机的实验研究，考察了直流流动对制冷机性能的影响，估算了不同制冷温度下制冷机循环的需气量，在对直流进行控制的情况下，采用2kW(RW2)和4kW(CP4)压缩机分别获得了18．7K和14．7K的最低制冷温度，对应的在30K的制冷量分别为10W和29．5W。