Langmuir films of polycyclic molecules on mercury

Langmuir films (LFs) of biphenyl and anthracene derivatives on the surface of liquid mercury were studied by surface-specific X-ray and surface tension measurements. Phases of lying-down, side-lying and standing-up molecules were found, some of which exhibit long-range lateral order. The molecular symmetry and the position and nature of the side-, end-, and headgroups are shown to dominate the structural evolution of the LFs with surface coverage.     

Copper(II) removal from aqueous solutions by fly ash

The removal of Cu(II) by adsorption on fly ash has been found to be concentration, pH and temperature dependent. The kinetics of adsorption indicates the process to be diffusion controlled. The Langmuir constants have been calculated at different temperatures, and the adsorption has been found to be endothermic (ΔH = 15.652 kcal mol^?1). The maximum removal is observed at pH 8.0, and variation in adsorption with pH has been explained on the basis of surface ionisation and complexation.     

Effect of Aminated Chitosan-Coated Fe3O4 Nanoparticles with Applicational Potential in Nanomedicine on DPPG,DSPC, and POPC Langmuir Monolayers as Cell Membrane Models

An adsorption process of magnetite nanoparticles functionalized with aminated chitosan (Fe₃O₄-AChit) showing application potential in nanomedicine into cell membrane models was studied. The cell membrane models were formed using a Langmuir technique from three selected phospholipids with different polar head-groups as well as length and carbon saturation of alkyl chains. The research presented in this work reveals the existence of membrane model composition-dependent regulation of phospholipid-nanoparticle interactions. The influence of the positively charged Fe₃O₄-AChit nanoparticles on a Langmuir film stability, phase state, and textures is much greater in the case of these formed by negatively charged 1,2-dipalmitoyl-sn-glycero-3-phospho-rac-(1-glycerol) (DPPG) than those created by zwitterionic 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC) and 2-oleoyl-1-palmitoyl-sn-glycero-3-phosphocholine (POPC). The adsorption kinetics recorded during penetration experiments show that this effect is caused by the strongest adsorption of the investigated nanoparticles into the DPPG monolayer driven very likely by the electrostatic attraction. The differences in the adsorption strength of the Fe₃O₄-AChit nanoparticles into the Langmuir films formed by the phosphatidylcholines were also observed. The nanoparticles adsorbed more easily into more loosely packed POPC monolayer.     

Cooperative adsorption behavior of fatty acid methyl esters from hexadecane <Emphasis Type="Italic">via</Emphasis> coefficient of friction measurements

The frictional behaviors of methyl oleate (MO), methyl palmitate (MP), methyl laurate (ML), and methyl stearate (MSt) as additives in hexadecane have been examined in a boundary lubrication test regime using steel contacts. It was found that the transient attributes of coefficient of friction (COF)-time spectra are a sensitive measure of adsorption equilibria. Critical additive concentrations were defined and used to perform novel and simple Langmuir analyses that provide an order of adsoprtion energies: MSt>MP>MO≥ML. Application of Langmuir, Temkin, and Frumkin-Fowler-Guggenheim adsorption models via nonlinear fitting of a general cooperative model demonstrates the necessary inclusion of cooperative effects in the applied model. In agreement with the qualitative features of steady-state COF-concentration plots, MSt modeling requires minimal cooperative interaction terms. However, MO, MP, and ML data require large attractive interaction terms to be adequately fitted. Primary adsorption energies calculated via the cooperative model are necessarily decreased, whereas total adsorption energies correlate well with values obtained via critical concentration analyses. These results and comparisons with previous adsorption studies of MO and MSt suggest that primary (ester-surface) and secondary (alkyl-surface) adsorbate-adsorbent, adsorbate-adsorbare, and (free-additive) adsorpt-adsorpt interactions collectively determine both the calculated primary and the cooperative interaction energies.     

Electrochemistry at capped platinum nanoparticle Langmuir Blodgett films: A study of the influence of platinum amount and of number of LB layers

Platinum nanoparticles (n-Pt), over-grafted with 2-thiophenecarbonyl chloride are assembled on gold electrodes, by the Langmuir Blodgett (LB) technique using behenic acid (BHA) as promoting agent. These layers are electrochemically active without any preliminary activation. The [Fe(CN)₆]^3−/4− redox couple was used as electrochemical probe. This paper reports on the influence of the number of deposited LB layers, and the n-Pt density on the electrochemical response. n-Pt density was modified by the change of the “BHA/n-Pt” ratio. Cyclic voltammograms of “[Fe(CN)₆]^3−/4−” were observed whatever the coating conditions. As soon as the first layer was deposited the electrochemical response was associated to the n-Pt coverage, its response slightly increased up to a steady state for five or seven layers. As expected, the increase of the Pt density favored the increase of the current density. XPS analysis performed before and after electrochemical cycling showed that 4-mercaptoaniline capped platinum nanoparticles, and their over grafting were chemically and electrochemically stable. Analysis of influence of the number or the n-Pt density of the layers showed that the electrochemically active part of LB electrodes was provided by the last layer plus a part of the underlying one.     

Rate of adsorption to and desorption from a langmuir surface: The case of zero activation barrier to adsorption without dissociation

Many rate constants of elementary steps on single crystals have been measured. Their pre-exponential factors can now be compared to those calculated by transition state theory. Such a calculation is presented in this Letter with due attention to microscopic reversibility, standard states, and configurational entropy.     

新型纤维素基螯合纤维的制备与吸附性能

为了发展水处理的途径,制备了β-环糊精改性的新型纤维素基螯合纤维.运用原子吸收光谱和紫外光谱考察了其对模拟水样中重金属离子(Cu2+)和有机染料(中性红)的吸附性能.实验结果表明,螯合纤维对Cu2+吸附率达6.24 mg/g,符合Langmuir吸附模型;对中性红也具有较强的包结能力.该鏊合纤维水处理能力强,制备简单,操作简便,有潜在的应用价值.     

Adsorption properties of a chelating resin containing hydroxy group and iminodiacetic acid for copper ions

A chelating resin, PSGI, was synthesized by the radical polymerization of GMA‐IDA, DVB, and styrene for the removal of Cu(II), Co(II), and Cd(II) from an aqueous solution. The characteristic functional groups and chemical composition of PSGI were analyzed by Fourier transform infrared spectroscopy and elemental analysis of C, H, and N. The equilibrium adsorption capacities of PSGI from their single‐metal ion solutions were 1.46 mmol/g for Cu(II), 1.02 mmol/g for Co(II), and 1.10 mmol/g for Cd(II). The adsorption isothermal of Cu(II) by PSGI followed the Langmuir isotherm. Increasing the concentration (0–0.1 M) of KCl in Cu(II) solution affected the adsorption behavior slightly. Within the pH range of 2–5.5, decreasing the pH of the Cu(II) solution did not produce remarkable changes in the equilibrium adsorption capacities. The adsorption capacities of PSGI for Cu(II) did not cause significant change during the repeated adsorption–desorption operations. The competitive adsorption tests verified that this resin had good adsorption selectivity for Cu(II) with the coexistence of Co(II) and Cd(II). © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 2123–2130, 2004     

Inhibition effect of a synthesized N, N＇-bis（2-hydroxybenzaldehyde）- 1, 3-propandiimine on corrosion of mild steel in HC1

The corrosion inhibition of mild steel in 1 mol/L HCl by N, N′-bis (2-hydroxybenzaldehyde)-1, 3-propandiimine (2-HBP) has been investigated by using potentiodynamic polarization, electrochemical impedance spectroscopy (EIS) and chronoamperometry measurements. The experimental results suggest that this compound is an excellent corrosion inhibitor for mild steel and the inhibition efficiency increases with the increase in inhibitor concentration. Polarization curves reveal that this organic compound is a mixed type inhibitor. The effect of temperature on the corrosion behavior of mild steel with the addition of the Schiff base was studied in the temperature range from 25℃ to 65℃. The experimentally obtained adsorption isotherms follow the Langmuir equation. Activation and thermodynamic adsorption parameters such as E a , ΔH, ΔS, K ads and ΔG ads were calculated by the corrosion currents at different temperatures and using the adsorption isotherm. The morphology of mild steel surface in the absence and presence of 2-HBP was examined by atomic force microscope (AFM) images.