Hydroxyapatite forming ability,ion release and antibacterial activity of the melt-derived SiO2–P2O5–Na2O–CaO–F glasses modified by replacing CaO with SrO and ZnO

Since the discovery of 1970s, bioactive glass has been a hot topic of research because of its excellent biological activity, which makes it a material that can repair and replace human bone tissue organs. In this work, the bioactive glasses in the system SiO₂–P₂O₅–Na₂O–CaO–F with different amounts of strontium oxide (SrO) and zinc oxide (ZnO) were prepared by the conventional melt quenching technology. The hydroxyapatite (HA) forming ability, ion release and antibacterial activity of these prepared glasses were investigated and the obtained results illustrated that SrO-doped samples had a better ability to form HA in modified simulated body fluid (MSBF) than ZnO-doped samples. As the immersion time of the sample in MSBF increased, the content of HA phase gradually increased. In the same immersion time, the formation ability of HA and the variation of SrO substitution amount showed a non-linear trend, which is mainly related to the influence of SrO content on the glass network structure. The results of ion concentration showed that the formation of HA was the result of the comprehensive action of various ions in the solution, especially the release rate of Si⁴⁺ ions, which had a direct impact on the formation ability of HA. The antibacterial test illustrated that the difference in antibacterial activity of bacteria solution at different sample concentrations may be related to the high pH environment and the osmotic effects caused by the non-physiological concentration of ions in the solution. The glass sample contained 4 wt% SrO showed the minimum bactericidal concentration at 64 mg/mL. The glass samples prepared in this experiment had good biological activity and antibacterial effect, making them suitable for using in dentistry and orthopedic applications, as well as providing a valuable composition reference for the preparation of bioactive glass with excellent comprehensive properties.     

Apatite formation on melt-derived bioactive glass powder based on SiO2-CaO-Na2O-P2O5 system

The higher melting temperature and longer soaking time during conventional glass melting route promoted the search for alternative in developing new bioactive glass (BG) composition with improved in fabrication temperature and melting time. The current project involved fabrication of new BG compositions based on SiO₂-CaO-Na₂O-P₂O₅ system via melt derived route. It was confirmed that all bioactive glass composition can be melted at temperature lower than 1400 °C. Formation of Si-O-Si (tetrahedral) functional group highlighted that silicate based glass was established as detected by Fourier transform infrared spectroscope (FTIR). BG bioactivity was performed by incubating the BG powder in Tris-buffer solution (pH 8) for 7, 14 and 21 days. In vitro test confirmed the apatite formation on the bioactive glass surface upon soaking in Tris-buffer solution with characteristic of carbonate group (C-O) and P-O band noticed from FTIR and present of crystalline peak observed in X-ray diffraction (XRD). Morphology of apatite formation on BG surface was observed using scanning electron microscope (SEM).     

Structural and microstructural comparison of bioactive melt-derived and gel-derived glasses from CaO-SiO2 binary system

Two glasses from CaO-SiO₂ binary system were obtained by sol-gel and melting techniques. The effect of two different glass obtaining methods was investigated using X-ray diffraction, FTIR, Raman and ²⁹Si MAS NMR spectroscopic methods. The measurements revealed significant differences in the glasses structure. Although both glasses were fully amorphous, the gel-derived glass had a more polymerized structure compared to the melt-derived one. The studied glasses were characterized by BET analysis to provide information about specific surface area of the obtained materials. Apart from microstructural evaluation, thermal properties and in vitro bioactivity study of all glasses were conducted to demonstrate differences in performance of the samples. The formation process of hydroxycarbonate apatite (HCA) layer was investigated using inductively coupled plasma mass spectrometry (ICP-MS) and structural studies.     

Processing of highly porous bioglass monoliths by hydrothermal hot pressing

Porous bioglass monoliths have been processed by hydrothermal hot pressing (HyHP) from sol-gel and melt-derived bioglass powders of composition (in mol %): SiO₂–CaO–P₂O₅ (55.0-40.0-5.0) and SiO₂–CaO–Na₂O–P₂O₅ (47.2-26.4-23.8-2.6), respectively. An open porosity of >70% ever reached in 3D structures is reported for monoliths issued from sol-gel powders. Dissolution studies were performed in simulated body fluid (SBF) for 1–30 days. The monoliths were analysed using X-Ray Diffraction (XRD), Fourier Transform Infra-Red (FTIR) spectroscopy and Scanning Electron Microscopy (SEM) to observe the formation of an apatite-like layer and elemental concentration of SBF was evaluated using Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES). A higher kinetics in the development of apatite layer was observed for sol-gel derived monoliths. This result is explained by the high surface areas of the nanosized sol-gel powders and the possibility of HyHP to create large porosity (mesoporous monoliths) and retain large surface areas. HyHP is also effective in processing 3D-bioglass structures with porosity gradient by co-sintering powders of different size.     

Thermal behavior,structure, crystallization and solubility of the melt-derived SiO2–P2O5–Na2O–F-MO (M = Ca,Sr, Zn) glasses

In this work, phospho-silicate glasses with SiO₂–P₂O₅–Na₂O–F-MO (M = Ca, Sr, Zn) composition were prepared by using the conventional melt quenching technology. Structural, physical, and chemical property tests were used to analyze the effects of different SrO and ZnO content on the structure and properties of the glasses. The results showed that the glass stability varied nonlinearly as CaO was replaced by SrO, which was mainly related to the different positions of Sr²⁺ and Ca²⁺ ions breaking the network connection in the network structure, and the substitution of ZnO for CaO led to a continuous decrease in the stability of the glasses. The immersion experiment showed that SrO doping was more feasible than ZnO doping to improve the biological activity of the glasses, and the doping of ZnO promoted the dissolution of ions in the glasses. The obtained results indicated that the glass samples prepared in this paper have potential biological activity, which has potential applications in dental treatment.