阻尼胶囊的生产工艺研究

通过对胶料配方、工艺规程、模具结构的试验研究，成功地解决了胶囊制造过程中的难点问题。     

刹车片减震胶的研制

讨论了高邻位酚醛树脂合成及其它助剂对减震胶性能的影响。研究试制出一种综合性能好的减震胶。     

Subcellular Localization of Acyl-CoA: Lysophosphatidylethanolamine Acyltransferases (LPEATs) and the Effects of Knocking-Out and Overexpression of Their Genes on Autophagy Markers Level and Life Span of A. thaliana

Arabidopsis thaliana possesses two acyl-CoA:lysophosphatidylethanolamine acyltransferases, LPEAT1 and LPEAT2, which are encoded by At1g80950 and At2g45670 genes, respectively. Both single lpeat2 mutant and double lpeat1 lpeat2 mutant plants exhibit a variety of conspicuous phenotypes, including dwarfed growth. Confocal microscopic analysis of tobacco suspension-cultured cells transiently transformed with green fluorescent protein-tagged versions of LPEAT1 or LPEAT2 revealed that LPEAT1 is localized to the endoplasmic reticulum (ER), whereas LPEAT2 is localized to both Golgi and late endosomes. Considering that the primary product of the reaction catalyzed by LPEATs is phosphatidylethanolamine, which is known to be covalently conjugated with autophagy-related protein ATG8 during a key step of the formation of autophagosomes, we investigated the requirements for LPEATs to engage in autophagic activity in Arabidopsis. Knocking out of either or both LPEAT genes led to enhanced accumulation of the autophagic adaptor protein NBR1 and decreased levels of both ATG8a mRNA and total ATG8 protein. Moreover, we detected significantly fewer membrane objects in the vacuoles of lpeat1 lpeat2 double mutant mesophyll cells than in vacuoles of control plants. However, contrary to what has been reported on autophagy deficient plants, the lpeat mutants displayed a prolonged life span compared to wild type, including delayed senescence.     

丁腈橡胶硫化反应动力学研究

设计了促进剂A 4种不同用量的丁腈橡胶配方;基于配方,先利用密炼机将丁腈橡胶、硬脂酸和ZnO混炼,再利用开炼机加入硫黄、促进剂和防老剂,再利用无转子硫化仪分别测试了160℃、170℃和180℃下胶料硫化曲线;基于硫化曲线计算出了每组配方胶料硫化反应速率常数K和活化能Ea。结果表明,在焦烧期时,NBR硫化反应为非一级反应,真正的一级反应开始于硫化速率达到最大时,即tdis;焦烧期后的反应可分为2个阶段且遵循一级动力学反应规律。     

矿用丁腈橡胶覆盖胶橡塑整芯输送带的粘合研究

概述矿用丁腈橡胶覆盖胶橡塑整芯输送带研制的意义。通过丁腈橡胶覆盖胶配方设计试验体会，对影响盖胶与带芯粘合的丁腈橡胶类型、增塑剂品种的选择及共硫化、混炼胶的停放等因素进行讨论。     

NBR／EPDM的增容共混研究

本文采用第三组份增容途径,改善了NBR/EPDM并用胶的相容性、加工性和力学性能。通过对不同增容体系的研究对比,发现不同增容剂的增容效果差异很大,其巾以EVA-14增容效果最为显著,加入该增容剂的并用胶,在适当的工艺条件及硫化体系下,可获得最佳力学性能。本文还研究了不同增容剂对并用炭黑胶各种性能的影响,可以做到在不降低并用胶的力学性能的同时,提高并用胶的耐热空气老化、耐大气老化和耐臭氧老化性能.透射电镜实验和动态力学谱图证明了加与未加增容剂时,NBR/EPDM并用胶均为两相结构,增容剂起表面活性剂的作用,加强了两相界面间的相互作用,使分散相EPDM细微化和均匀化。     

几种丁腈橡胶/有机蒙脱土纳米复合材料的制备与对比表征

选择几种自制的有机蒙脱土,利用双辊直接混炼法与丁腈橡胶复合,测试材料的力学性能,确定出了最佳的有机蒙脱土牌号。利用透射电子显微镜观察,确定制备出了半剥离型的丁腈橡胶/有机蒙脱土（NBR/OMMT）纳米复合材料;测试材料的应力-应变曲线表征了不同有机蒙脱土含量的纳米复合材料的力学性能;利用溶剂渗透性测试实验表征了纳米复合材料的耐油性提高;通过透射电子显微镜观察发现,采用有机蒙脱土预凝胶,成功地制备了全剥离型的NBR/OMMT纳米复合材料。     

PVC/TPU/NBR三元共混物的制备及性能研究

对PVC／热塑性聚氨酯（TPU）／SR三元共混物的性能进行研究，重点讨论NBR品种、TPU／NBR并用比、PVC聚合度、增塑剂DOP和硫化剂DCP用量对PVC／TPU／NBR三元共混物性能的影响。结果表明。PVC／TPU／NBR-3604三元共混物的物理性能较优；PVC／TPU／NBR-3604三元共混物的拉断伸长率和拉断永久变形均随着PVC聚合度的增大基本呈上升趋势；随着增塑剂DOP用量的增大，共混物的邵尔A型硬度、拉伸强度、撕裂强度和拉断永久变形均基本呈下降趋势，拉断伸长率增大；随着硫化剂DCP用量的增大。共混物的拉伸强度和拉断伸长率变化不大，撕裂强度基本呈逐渐减小的趋势。不同PVC／TPU／SR三元共混物的扫描电子显微镜照片表明，NBR与PVC和TPU的相容性较好。     

NBR低硫硫化体系的研究

试验研究低硫硫化体系对NBR胶料性能的影响。结果表明，对于低硫硫化体系，单用促进剂不能得到理想的硫化曲线；促进剂并用可提高胶料的抗焦烧性能，且硫化曲线平坦，硫化速度适中。当低硫硫化体系为硫黄0．3，促进剂TMTD1．5，促进剂CZ1，促进剂DTDM0．8，防焦剂CTP1时，NBR胶料的抗焦烧性能明显提高，硫化胶的综合物理性能最优。     

Effect of adhesive‐coated glass fiber in natural rubber (NR), acrylonitrile rubber (NBR), and ethylene–propylene–diene rubber (EPDM) formulations. II. Effect of cyclic loading,abrasion, and accelerated aging

Treated glass fibers (RICS, 3 and 6 mm in length) were added at a concentrations of 10, 20, and 30 phr in natural rubber (NR), nitrile rubber (NBR), and ethylene–propylene–diene comonomer (EPDM) formulations, in both plain and carbon black mixes. The compounds were mixed in two‐roll mill and were evaluated for their resistance to hot‐air aging, abrasion, compression set, Goodrich heat buildup, De Mattia fatigue, and for NR mixes, adhesion in the tensile mode. The vulcanizates of the three rubbers showed resistance to hot‐air aging. Abrasion resistance was poor for NR, and it improved with carbon black addition in the presence of treated glass fiber in NBR. In carbon‐black‐added EPDM vulcanizates, the abrasion resistance and fatigue resistance were better. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1124–1135, 2004