腐蚀阴极尖端的新方法

给出一种腐蚀阴极尖端的新方法,使得对阴极常用金属材料(W,Mo,Ir,Ta等)制作的阴极尖端的腐蚀效果明显,针尖对称性和重复性都很好,成品率和质量都有所提高.     

原油常减压装置节能技术

由于常减压装置消耗能量约占炼油厂总用能的25％～30％，已成为炼油厂中消耗量最大的装置，因此，我国各炼油厂对常减压装置进行以降低能耗为中心的技术改造就显得十分必要。详细介绍了适用于常减压装置节能的新工艺、新设备以及优化操作。工艺方面主要有采用过滤脱盐新技术对原油进行深度脱盐、采用强化蒸馏新工艺提高原油蒸馏拔出率、优化产出、增产柴油；设备方面主要使用规整填料和新型塔板改善分馏塔分馏效率、使用新型燃烧器提高加热炉效率、使用新型换热器提高热回收率、采用变频技术降低装置电耗；优化操作方面主要有利用计算机进行监控与管理和改善操作条件。最后对国内原油常减压装置节能改造提出了一些建议，以供炼油企业在进行原油常减压装置改造时参考。     

峒室爆破CAD设计方法研究

本文对峒室爆破断面布药计算机辅助设计参数驱动方法进行了探讨围绕断面布药主要参数的变化，提出一种基于参数驱动的计算机辅助设计方法，利用ｗｉｎｄｏｗｓ操作系统下的动态数据交换特性，对断面布药进行布药参数优化，实现了交互调整布药，形成一套断面布的计算机软件，为工程爆破设计实现计算机提供了一种可行的方法。     

线阵CCD驱动器模块的优化设计

介绍了应用层次分析方法优化设计线阵ＣＣＤ驱动器模块的设计方案。设计出１６档可变积分时间，五档可变驱动频率，具有行同步和采样同步脉冲输出的通用型驱动器模块。它容易与各种计算机接口，广泛地应用于各种光谱仪器、精密尺寸检测仪器中。     

三峡永久船闸人字门启闭机设计

三峡永久船闸人字门具有运行边界条件复杂，运行水头和淹没水深巨大的特点。在我国大型船闸上采用液压机构操作人字闸门尚属首次。通过分析人字门运行动水阻力矩的大小和变化规律，研究人字门液压启闭机构的运行方式及整体稳定等关键技术，对永久船闸人字六门启闭机构设备进行了一系列的设计优化。对船闸的安全运行和经济效益有着重要意义，亦对今后我国高水头船闸启闭设备的设计和应用提供参考。     

双极型静电感应晶体管开关时间的测量与分析

从理论和实验两方面对静电感应晶体管（ＢＳＩＴ）的开关时间进行了分析和测量，提出了简单的分析方法，将影响ＢＳＩＴ开关时间的各个因素归结为结构因子和材料因子，从而简化了分析影响ＢＳＩＴ开关时间的因素，对于ＢＳＩＴ的实际工艺，结构设计有指导意义。     

The Effect of Moisture Content on the Conversion of Ergosterol to Vitamin D in Shiitake Mushrooms

The distribution of ergosterol in different parts of shiitake mushrooms was studied in order to optimize the conversion of ergosterol to vitamin D₂ during drying. The effect of moisture on the conversion of ergosterol to vitamin D₂ was also investigated by adjusting the moisture content of fresh mushrooms to different levels in a large vacuum desiccator and subjecting them to UV irradiation at 290-320 nm wavelength, for 2 h. The moisture, ergosterol and vitamin D₂ contents were determined using standard procedures. It was found that the ergosterol content on a dry matter basis of fresh shiitake mushroom was highest in the gills (10.6 ± 0.99 mg/g DM), followed by the cap or pileus (5.34 ± 0.64 mg/g DM) and was least in the stalk or stipe (2.97 ± 0.56). The moisture content had a marked influence on the conversion of ergosterol to vitamin D₂, the best conversion taking place at a moisture content of about 70% on a wet basis.     

冷库的最优化设计与应用

冷库是冷链体系的关键设备之一，其设计技术的优劣，将直接关系到冷库的初期建设总投资、后期冷库的运行费用、管理费用等一系列重要的经济指标；在一定程度上决定了冷库在食品的加工、存储过程中的经济效益。本文通过对冷库的计算机优化设计结果和工程实例进行对比分析，证明了最优化设计在冷库设计中的可行性，并得出了一些对工程设计具有指导意义的结论和图表。     

Effect of electricity tariff on the optimum insulation-thickness in building walls as determined by a dynamic heat-transfer model

Thermal insulation is one of the most effective energy-conservation measures in buildings. Despite the widespread use of insulation materials in recent years, little is known regarding their optimum thickness under dynamic thermal conditions. Insulated concrete blocks are among the units most commonly used in the construction of building walls in Saudi Arabia. Typically, the insulation layer thickness is fixed at a value in the range 2.5–7.5 cm, regardless of the climatic conditions, type and cost of insulation material, and other economic parameters. In the present study, a numerical model based on a finite-volume, time-dependent implicit procedure, which has been previously validated, is used to compute the yearly cooling and heating transmission loads under steady periodic conditions through a typical building wall, for different insulation thicknesses. The transmission loads, calculated by using the climatic conditions of Riyadh for a west-facing wall, are fed into an economic model in order to determine the optimum thickness of insulation (L_opt). The latter corresponds to the minimum total cost, which includes the cost of insulation material and its installation plus the present value of energy consumption cost over the lifetime of the building. The optimum insulation thickness depends on the electricity tariff as well as the cost of insulation material, lifetime of the building, inflation and discount rates, and coefficient of performance of the air-conditioning equipment. In the present study, the effect of electricity tariff on the computed optimum insulation thickness is investigated. Different average electricity tariffs are considered; namely, 0.05, 0.1, 0.2, 0.3 and 0.4 SR/kWh (designated as Cases 1–5, respectively; 1 US$ = 3.75 Saudi Riyals). Results using moulded polystyrene as an insulating material show that the values of L_opt are: 4.8, 7.2, 10.9, 13.7 and 16.0 cm for Cases 1–5. Under the conditions of optimal insulation thickness for each electricity tariff, Case 1 gives the lowest total cost of 17.4 SR/m², while Case 5 gives the highest total cost of 53.1 SR/m². Corresponding thermal performance characteristics in terms of yearly total and peak transmission loads, R-value, time lag and decrement factor are presented.     

二维轴对称折迭－组合腔CO2激光器失调时的输出光束的近场分析

给出平凹谐振腔和凹平凹谐振腔失调时光轴确定方法。在二维轴对称折迭－组合腔 激光器小角度失调运行时，对非相干并和和相干并和后的输出光束的近场强度分布做了分析和模拟。结果表明：小角度失调对4cm以内的近场影响不大，光强分布仍具有高斯状分布；对4cm以外的近场影响较大，光强分布发生相应的形变，且随着失调角度变大而变大。