Surface Hardening of High-Strength Low Alloy Steels (HSLA) Dual-Phase Steels by Ball Burnishing Using Factorial Design

Burnishing is used increasingly as a finishing operation which gives additional advantages such as increased hardness, fatigue strength, and wear resistance. Experimental work based on 3⁴ factorial design was carried out to establish the effects of ball burnishing parameters on the surface hardness of high-strength low alloy steels (HSLA) dual-phase (DP) steel specimens. Statistical analysis of the results shows that the speed, feed, lubricant and ball diameter have significant effect on surface hardness.     

开发PROFIBUS-DP智能从站

简单介绍了PROFIBUS－DP现场总线，同时讨论了利用89C52单片机和PROFIBUS－DP从站芯片SPC3开发PROFIBUS－DP智能从站的软硬件设计方法。     

程控交换机收号系统模拟的研究

本文提出了一种模拟程控交换机收号系统的有效方法,采用消息驱动收号事件表的思想,运用并发控制技术,实现了在没有话路硬设备的条件下多用户同时拨号在线模拟收号控制的功能。本文提出的收号系统模拟方案已成功应用于某国产中大容量程控交换机的呼叫模拟系统中。     

换位导线生产线电气控制系统

通过对换位导线生产线的研究,提出了采用数字轴和电子齿轮控制的换位导线生产线方案,给出了系统的软硬件设计,构成了分电机驱动的换位导线生产线及其控制系统。     

网络安全管理

就网络安全管理的几个方面进行了简述,提出了按照不同维度对网络安全管理进行深入管理和保护的思路和方法。     

某基地设备综合监控系统设计与实现

根据海军某基地实际附属设备及环境参数的监控要求,设计并实现了自动化设备综合监控系统。该系统使用西门子WinCC及S7-300/200 PLC开发完成,实现了WinCC C/S,B/S架构及S7-300/200PLC的Profibus-DP主从站结构,构建了集环境温湿度监控、设备监控、变电站监控和风水监控一体的综合监控系统,解决了复杂的第三方通讯、控制逻辑问题,实现了设备状态信息现场采集、中心管理、远程控制的功能。实际的运行效果证明,该系统设计合理,具有良好的可靠性和实用性。     

双参数Bézier曲线的升二次扩展

本文以二次Bernstein基函数为例,首次提出了含双参数基函数的新扩展——αβQ—Bern-stein基函数,此类基函数具有新的特点,即基函数的扩展次数一次性升高两次,且包含了二次多项式和带一个参数的三次多项式基函数的所有性质。基于这组基函数定义了αβQ—Bézier曲线,该曲线也含有参数,具有形状可调性,当α与β取某些值时曲线能达到C4连续或在某个端点处C0连续。最后与含两个参数的升一次Bézier曲线进行比较,该曲线具有调节范围广、灵活性更强的优势。     

基于相变产物构建DP1180相变动力学方程研究

摘要：DP1180钢相变动力学方程的构建,有利于其力学性能的精准调控。利用Gleeble 3500对DP1180钢进行相变点测定,结合切线法、金相 硬度法研究了DP1180钢在冷却过程中的显微组织演变规律,绘制连续冷却转变曲线(CCT),并基于相变产物对相变动力学方程（JMAK方程）进行了修正。结果表明：冷速为0.5~1℃/s时,组织为铁素体(F)和贝氏体(B);冷速为2℃/s时,有马氏体(M)出现;冷速为10℃/s时,组织为贝氏体(B)和马氏体(M);冷速大于20℃/s时,组织以马氏体(M)为主;显微硬度随冷速的增加而升高;基于不同相变产物对n值的影响规律,对传统JMAK方程进行修正,构建了基于相变产物的相变动力学方程,预测精度得到提升。     

Characterization of ramie yarn treated with sodium hydroxide and crosslinked by 1,2,3,4‐butanetetracarboxylic acid

Ramie yarns were treated with various concentrations of NaOH at room temperature and subsequently crosslinked with 1,2,3,4‐butanetetracarboxylic acid (BTCA). The microstructure and tensile properties of the treated yarns were characterized. X‐ray diffraction (XRD) and FTIR were used to study the crystalline structure of the resultant ramie yarns. The results showed that the maximum change in the structure of the alkali‐modified ramie took place at 16% NaOH, which would completely transform cellulose I to cellulose II. At the same time, the crystallinity index and fiber orientation decreased to the minimum value while the absorption properties were enhanced. The average degree of polymerization (DP ) of the treated ramie yarns slightly decreased after NaOH treatment. Tensile properties including tenacity, breaking elongation, and modulus of the treated yarns were also investigated. Scanning electron microscopy (SEM) was used to investigate the breakage of the treated yarns. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1857–1864, 2004     

Configurational statistics of copolymers prepared by complex-radical polymerization

Radical copolymerization is considered theoretically taking into account the effect of complexing on the configurational statistics of macromolecules formed. Akinetic model has been developed that considers, apart from the ordinary addition of single monomer units to a propagating chain, the possible addition of monomer unit pairs along with a complexing agent in the form of a ternary complex. Within the framework of this model, the problem of calculating the probabilities of formation of any sequences of monomer units (taking into account their microtacticity) in a macromolecule has been rigorously solved as well as the problem of finding the composition distribution of the copolymer formed. It has been shown that this distribution is described by a conventional Gauss law and the appropriate parameters are given. Possible generalizations of the suggested approach are indicated.