磁场对泡沫钻井液电导率的影响研究

磁处理技术是利用磁场对非铁磁性流体作用．使被作用物的性质产生某些期望的变化，从而改善生产效果和使用效益。磁处理对常规钻井液流变性能的影响研究结果表明，磁化能明显改善钻井液性能。通过研究磁化后泡沫钻井液的性质．测定与控制钻井液的电导率，以便从电测曲线上取得更好的地层特性评价。泡沫钻井液的电导率与密度基本呈线性关系，电导率随密度的升高而变大；磁处理后泡沫钻井液的性质发生明显改变．泡沫钻井液的电导率有不同程度的下降，在磁场强度为100mT、蜂数为2的磁场条件下泡沫钻井液的电导率变化率降低最大，电导率平均下降16％左右。     

Polyimide foams from powder: Experimental analysis of competitive diffusion phenomena

In the present study, various diffusive processes have been investigated during foaming of powdered precursors of polyimide. A detailed analysis of the powdered precursor's characteristics allows for an enhanced morphological understanding of the resulting microstructures and foam unit cell. Parameters that are central to the foaming process such as particle morphology, volatile concentration and sorption-desorption processes are evaluated. Isothermal and non-isothermal desorption experiments have been carried out by thermogravimetric analysis (TGA), and specific diffusive processes have been correlated to thermodynamic and kinetic transitions by means of modulated differential scanning calorimetry (MDSC) of the corresponding materials. It was found that two primary fluxes of volatiles, one out of the external surface of the particles (responsible for volatile desorption) and the other into the growing bubble (responsible for vapor supersaturation inside the bubble) compete against each other creating a competitive scenario that becomes the controlling factor for potential inflation within the precursor particles.     

泡沫在井壁的物理化学作用

泡沫存在着向井壁吸附、聚集的趋势。气泡在井壁的粘着吸附分为四个过程,即接触发生、水层减薄、水层破裂、最终形式是形成三相润湿周边,产生具有疏水性、粘弹性的泡沫吸附壁,从而起到抑制井壁表面水化的作用。     

新型泡沫稳定剂氧化叔胺的合成研究

介绍了用十二胺合成氧化叔胺的方法,研究了叔胺及氧化叔胺的合成工艺条件和影响反应的因素.泡沫稳定实验显示氧化叔胺是一种较好的新型泡沫稳定剂.     

Prediction of foam growth and its nucleation in free and limited expansion

The influence volume approach (IVA) is often utilized for modeling the mass transfer process dictating bubble growth dynamics in physical foaming. However, the assumed concentration profile in the IVA method is only valid when the changes in dissolved gas concentration are small (less than 5%). In addition, the validity of the IVA method is difficult to justify in chemical foaming applications because of the difficulties involved in defining the dissolved gas concentration profile.In the present work, we define two distinct stages of bubble growth for physical foaming. These two stages are termed as free and limited expansion and are controlled by the bubble nucleation rate. Bubble nucleation is assumed to occur only in the free expansion stage. In this stage, the bubble pressure drops substantially from an initially high pressure in the supersaturated state while the dissolved gas concentration changes very little. The second stage of our two-stage mass transfer model is termed the limited expansion stage and accounts for bubble growth in the late stages of foam evolution, when the pressure changes become small. However, in the limited stage of bubble growth the dissolved gas concentration drops significantly, as the available dissolved gas is depleted. To summarize our two-stage mass transfer model of foam expansion, the pressure difference between the bubble phase and the liquid phase is the primary mechanism for driving mass transfer in the early (free) stages of foam growth and the concentration difference is the driver for bubble growth in the late (limited) stages of growth. The first stage can be regarded as the nucleation stage and it is relatively short; while the second stage can be regarded as the bubble growth stage and is much longer. Most of the bubble volume expansion takes place in the second stage.The concentration gradient at the bubble edge, which is often ignored in other models, is analyzed in detail in this paper. The details of our novel mass transfer model are also presented.     

PVC薄膜—尼龙织物复合用胶粘剂的研制

介绍 PVC 薄膜—尼龙织物复合用胶粘剂试制的情况。主要包含胶粘剂主体聚合物、增粘组分、增塑剂、反应促进剂及其它助剂的选择。并阐述了胶粘剂的放大试验情况及应用工艺条件。     

Degassing of molten polymers

Degassing is a key-step in polymer processing. Low-molecular-weight components are removed from a polymeric system. The transport of these components takes place by diffusion to the polymer-vapour interface. This interface can be formed by free surfaces of single-phase polymer melts or by bubbles. In this study, the transport with and without bubble nucleation is investigated independently from each other in a special designed apparatus similar to a degassing extruder.The mass transport in thin films and in rotating pools with surface renewal is measured. High surface renewal rates and thick films enhance the mass transfer for single phase flow and bubbly flow. Dimensionless mass transfer coefficients are given as a function of the surface renewal rate, the area of the free surface and the total mass of the polymer. The conditions for bubble nucleation and foam formation are investigated. The bubble nucleation is observed in the rotating pool in the area of high shear velocity.     

多用户MIMO系统低复杂度收发联合波束成形方案

基于多用户多输入多输出(MIMO)有限反馈系统提出了一种收发联合波束成形方法。该方法在发送端采用每个用户酉速率控制(PU2RC)波束成形技术,在接收端采用基于信干噪比(SINR)最大化的天线合并算法。天线合并算法利用用户SINR的广义Rayleigh熵特性寻找最佳的天线合并矢量。仿真结果表明,该方法能充分利用信道信息,不仅改善了传统PU2RC系统的和速率性能,相对于已有的迫零(ZF)联合波束成形方法,对信道状态信息的量化误差的敏感性更低,用户选择算法的复杂度更低,且低速率反馈条件下和速率性能更优。     

消失模精密铸造工艺研究

借助熔模铸造制壳工艺制成消失模铸造用的超薄空腔型壳，以减少消失模铸造在浇注过程中因聚苯乙烯气化而产生的铸件增碳、增氢等缺陷。聚苯乙烯模失模工艺为随炉升温至600℃，保温60min,型壳焙烧工艺为800℃焙烧1h。     

基于WLF方程的硬质聚氨酯泡沫塑料贮存寿命评估

对硬质聚氨酯泡沫塑料进行了105℃条件下的高温老化试验，试验前后检测了其压缩性能的变化情况。结果表明，硬质聚氨酯泡沫塑料老化后其压缩性能没有明显变化，因而不能应用Arrhenius方程来推导其贮存寿命。为此从时温等效原理出发，通过对硬质聚氨酯泡沫塑料压缩蠕变曲线的平移推算出了其WLF方程，利用此方程，可以很容易地推导出硬质聚氨酯泡沫塑料高温老化的低温等效贮存时间；该种硬质聚氨酯泡沫塑料在20℃、25℃及30℃条件下的存贮寿命应至少分别在50．3a、45．3a及40．5a以上。