聚砜酰胺的分子量对其超滤膜性能的影响——Ⅲ.热性能

对不同分子量的PSA 材料和由其制成的超滤膜的TGA、DSC 及FTIR 研究表明,PSA 会以氢键的形式吸附水份,被吸附的水份主要以单分子形式存在,双聚或多聚的也有,但较少;并且在温度升到40℃左右将全部游离出来,在120℃左右则全部气化离开PSA。PSA 材料在400℃以上才开始分解,其耐热性能随分子量的增大而降低。凝胶浴不同对PSA 膜的晶态影响不大。     

Epoxy-Polysulfone Networks as Advanced Matrices for Composite Materials

Compatibility between polysulfone (PSF) and epoxy oligomers in the melt state as well as the morphology and properties of alloys obtained were studied as a function of composition. The compatibility depends on the length and structure of epoxy molecules, and is best in the case of epoxysulfone oligomers (ESO).

The properties of hybrid matrices are determined by their composition and morphology. The most pronounced effects are observed in the regions of small concentrations of either component. A small quantity of PSF significantly improves thermal stability and heat resistance of the epoxy resin as well as its impact strength. On the other hand, on addition to PSF of small amounts of epoxysulfone oligomers, the processability of the matrix can be substantially improved. In particular, the melt viscosity decreases, and wetting and impregnation of fibrous reinforcement is facilitated. Besides, the matrix adhesion to fibers is increased.

Powdered PSF/ESO/curing agent mixtures are good for application in solvent-free technological processes of fibrous composites production, e.g. in electrostatic deposition of matrix particles onto a reinforcing fabric. Plastics based on hybrid matrices are distinguished by improved strength.     

Ultrafiltration of Myoglobin using Surface-Sulfonated Polysulfone Hollow Fiber

The usage of ionic polysulfone (PSF) hollow fiber for the ultrafiltration of protein was investigated. The surface of polysulfone hollow fiber was sulfonated through the Blanc chloromethylation reaction to become anionic. Characterization of the modified hollow fiber was performed including ion exchange titration, pure water permeation, and molecular sieving measurement. The performance of ultrafiltration of protein was evaluated using myoglobin at various pH values. The results show that the water contact angles and hydraulic resistance are markedly decreased, indicating that the surface-modified PSF hollow fibers are more hydrophilic. In addition, the retention of myoglobin depends on the pH of the solution. At a pH higher than the isoelectric point of myoglobin, both hollow fiber and the protein have the same charge sign, and both the flux of the solution and the retention are the highest. The sulfonated PSF hollow fiber may be used as a biomaterial for protein separation and purification.     

Phase behavior and density of polysulfone in binary fluid mixtures of tetrahydrofuran and carbon dioxide under high pressure: Miscibility windows

Mixtures of tetrahydrofuran (THF) and carbon dioxide (CO₂) were identified as new solvent systems for polysulfone. The miscibility and density of polysulfone in binary fluid mixtures of THF and CO₂ were investigated from 300 to 425 K at pressures up to 70 MPa. The influence of the CO₂ and polysulfone concentrations was studied, with the concentrations of the other two components kept constant. At a 4.5 wt % polymer concentration, the demixing pressures in a 10 wt % CO₂ and 90 wt % THF mixture increased with temperature (310–425 K) from 15 to 40 MPa. With increasing CO₂ concentration (from ca. 10 to 14 wt %), a significant increase (from 15 to 70 MPa at 310 K) was observed in the demixing pressures. Furthermore, with an increasing amount of CO₂, the nature of the phase boundary shifted from lower critical solution temperature behavior to upper critical solution temperature behavior. The influence of the polymer concentration was studied in the 0–5 wt % range at two CO₂ levels, with solvent compositions of 10 wt % CO₂ and 90 wt % THF and 13 wt % CO₂ and 87 wt % THF. The system with a higher level of CO₂ (13 wt %) showed highly unusual phase behavior: on pressure–composition and temperature–composition diagrams, the system displayed two distinct regions of miscibility. In the system with 10 wt % CO₂, the distinct regions of miscibility that were observed in the system with 13 wt % CO₂ partially overlapped and led to a W‐shape phase boundary. The densities of the polymer solutions were measured from the one‐phase region through the demixing point into the two‐phase region at a constant temperature. No significant change in density was found around the phase boundary; this indicated that the coexisting phases had similar densities, as is often the case with liquid–liquid phase separation in polymer solutions under high pressure. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 2357–2362, 2002     

Fabrication of polysulfone asymmetric hollow‐fiber membranes by coextrusion through a triple‐orifice spinneret

Polysulfone (PSf) asymmetric hollow‐fiber membranes, which have a dense outer layer but a loose inner layer, were tentatively fabricated by coextrusion through a triple‐orifice spinneret and a dry/wet‐phase inversion process. Two simple polymer dopes were tailored, respectively, for the dense outer layer and the porous inner layer according to the principles of the phase‐inversion process. By adjusting the ratio of the inner/outer extrusion rate, the hollow‐fiber membranes with various thicknesses of outer layers were achieved. The morphology of the hollow‐fiber membranes was exhibited and the processing conditions and the water permeability of the membrane were investigated. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 259–266, 2004     

异形板纺制中空纤维复合膜基膜的工艺及膜性能研究

使用3C型异型多孔喷丝板纺制高性能聚砜中空纤维复合膜基膜,并探讨纺丝液组成和纺丝工艺对基膜性能的影响.结果表明:使用异形板纺丝,对影响纺丝液粘度的料液温度、聚砜及成孔添加剂的浓度要求较高;实验中得到聚砜质量分数为30%、凝固浴温度为50℃、成孔添加剂聚乙二醇-20000质量分数为11%时,所得基膜的纯水通量最高,达到120 L(/m·2h).     

聚砜类原位复合材料加工流变性

合成了含4,4'-二羟基联苯和4,4'-二羟基二苯基甲烷结构的两种液晶共聚酯BP-LCP和BPM-LCP,将其与聚砜共混制备原位复合材料。探讨了共混物在Haake转矩流变仪中密炼时转矩的变化;通过毛细管挤出考察了液晶共聚酯分子结构、分子量及含量变化对原位复合材料流变性能的影响,由流动曲线获得这一类原位复合材料熔体大部分表现为假塑料性非牛顿型流体,但含低分子量BP-LCP20%和BPM-LCP30%的两种原位复合熔体均表现出特殊的流变性:较低剪切速率时为胀塑性流体,较高剪切速率时为假塑性流体。分析了这种现象与液晶共聚酯结构形态的关系。并讨论了增强组份和基体的相容性对原位复合材料流变性的影响。     

巯基螯合性中空纤维亲和膜的制备及其除Hg2+性能

采用氯甲基化聚砜（CMPSF）中空纤维基质膜为螯合基团载体,通过硫脲化反应及碱性条件下的水解反应,制备了巯基螯合性中空纤维亲和膜,考察了流动相条件和操作工艺参数对中空纤维亲和膜除汞的影响.实验结果表明：加入NaCl不利于中空纤维膜除汞,在低pH值下,Hg ^2＋的回收率大大降低;原料溶液浓度对Hg ^2＋回收率影响不大,中空纤维膜可在较大浓度范围内除汞;中空纤维亲和膜可以在高进料速率下操作,能实现较大规模除汞.     

含有不同小分子添加剂的聚砜铸膜液的流变性研究

以LiCl饱和水溶液、醇类(甲醇和乙醇)、丙酮等小分子为添加剂，配制聚砜(PSf)／二甲基乙酰胺(DMAc)铸膜液，研究该铸膜液的粘度随添加剂的类型和含量的变化情况，重点探讨了PSf／DMAc／LiCl饱和水溶液体系的流变性能．结果表明，水及LiCl饱和水溶液对PSf／DMAc溶液具有增粘作用，而丙酮具有稀释作用，醇类介于二者之间，没有明显的增粘作用，并且稍使溶液粘度下降，PSf／DMAc／LiCl饱和水溶液体系属于切力变稀流体。     

Effect study of hexagonal mesoporous silica/polyaniline nanocomposite on the structural properties of polysulfone membranes and its heavy metal removal efficiency

New mixed matrix membranes of polysulfone were synthesized by different content of hexagonal mesoporous silica coated by polyaniline and used for nickel and lead ion removal. The membranes were characterized by FESEM, XRD, BET, TGA, and FTIR, and zeta potential measurements. The results showed that PANi/HMS particles enhanced the membrane porosity and permeability. These effects were explained according to an increase of the membrane hydrophilicity due to the formation of new functional groups during membrane casting. The results showed that metal ion rejection was performed by a filtration–adsorption mechanism, resulting in fixation of metal ions on the active sites of membranes.