P(DBF-VA)型柴油低温流动性改进剂的研制

针对新疆地产柴油蜡含量较高的特点,以游离基聚合法合成了富马酸双链混合酯和醋酸乙烯酯共聚物型[P(DBF-VA)]柴油低温流动改进剂,利用正交实验研究了单体配比,引发剂用量,溶剂用量,聚合温度对聚合物降冷滤效果的影响。共聚物用IR进行表征,利用XRD初步探讨了该降凝剂的降凝机理。结果表明:该剂能使吐哈—10~#、0~#柴油冷滤点降低10℃和7℃;使独山子0~#柴油冷滤点下降12℃;使石化0~#柴油冷滤点下降8℃;使克拉玛依0~#柴油的冷滤点下降8℃。     

AFM observation of polyethylene single crystals: selective handedness of screw dislocations in a chair type

The three-dimensional morphology of polyethylene single crystals grown from dilute solution has been examined by atomic force microscopy. Single crystals were deposited on a soft ground of aqueous solution of poly(vinyl alcohol) (PVA) to avoid the collapse of thin lamellar crystals with thickness of 10 nm. The observation of single crystals on dried PVA clarifies the morphology of a chair type crystal as well as well-known hollow pyramidal type. It has been confirmed that the screw dislocations in the chair type follow a selection rule of the handedness in a manner to relieve the distortion in the chair type.     

啤酒酵母菌种的石蜡保藏技术

啤酒酵母菌种用液体石蜡技术保藏具有设备简单、操作方便,成活率高,变异少,优良种性能保持较长时间的优点,实用价值高。本文从液体石蜡保藏菌种的机理、保藏效果、保藏等具体技术操作及其使用方法都作了较为详细的介绍,相信能为啤酒菌种的保藏带来较大的好处。     

Simulations of the mobile phase of polyethylene

Results are presented from atomistic molecular dynamics simulations of the mobile pseudo-hexagonal phase of polyethylene, which occurs under conditions of elevated pressure and temperature. Three different types of model are considered, all of which employ periodic boundary conditions. The first model consists of n-alkane sequences (48×-C₂₄H₄₈-) that are bonded across the simulation box boundaries to produce chains that are effectively infinite in extent. On heating, at high pressure, this system displays a rotator phase, in which the chains retain an all-trans conformation, and rotate as semi-rigid units. A second model, consisting of finite n-alkanes (48×C₂₄H₅₀) displays the same behaviour at low temperatures, but at high temperature and pressure forms a conformationally disordered rotator phase, characterised by a large proportion of gauche defects and a significant lattice expansion. The final model considered contains long n-alkanes (24×C₁₀₂H₂₀₆) which contain jog defects and each pass twice through the simulation box. This model forms a conformationally disordered rotator phase at high temperature and ambient pressure. The behaviour of the three models, in terms of the variations in chain conformation and rotational and translational dynamics, are compared. The conformationally disordered phases provide useful representations of the experimentally observed mobile phase.     

Gasification of polyethylene using steam plasma generated by microwave discharge

Gasification of polyethylene (PE) pellet was studied using atmospheric argon-steam plasma generated by microwave discharge and the feasibility of the process was examined. The experimental results showed that additional steam to argon plasma promoted the weight decrease of PE and enhanced the production of H₂, CO, CO₂ and CH₄. The results confirmed that the treatment of plastics with the steam plasma was effective to obtain synthesis gas.     

Prediction and quality control of the melt index during production of high-density polyethylene

In polyolefin processes the melt index (MI) is the most important control variable indicating product quality. Because of the difficulty in the on-line measurement of MI, a lot of MI estimation and correlation methods have been proposed. In this work a new dynamic MI estimation scheme is developed based on system identification techniques. The empirical MI estimation equation proposed in the present study is derived from the 1 ^st -order dynamic models. Effectiveness of the present estimation scheme was illustrated by numerical simulations based on plant operation data including grade change operations in high density polyethylene (HDPE) processes. From the comparisons with other estimation methods it was found that the proposed estimation scheme showed better performance in MI predictions. The virtual sensor model developed based on the estimation scheme was combined with the virtual on-line analyzer (VOA) to give a quality control system to be implemented in the actual HDPE plant. From the application of the present control system, significant reduction of transition time and the amount of off-spec during grade changes was achieved     

抗氧剂于有机PTC热敏导电材料性能的稳定作用研究

探讨了抗氧剂在聚乙烯 乙烯 醋酸乙烯酯共聚物 炭黑 (PE EVA CB)体系中的作用。结果表明 ,在体系中加入抗氧剂可以提高材料体系的结构稳定性 ,从而可以在一定程度上改善材料的热电稳定性。当在体系中加入 2 .0 %(w)的抗氧剂时可收到良好效果。     

高发泡聚乙烯阻燃初探

根据聚合物燃烧现象和一般阻燃机理寻求研究高发泡聚乙烯的阻燃方法和阻燃剂。研究结果表明:只有对添加型阻燃剂三元并用,方能不降低高发泡聚乙烯的物性,制得较为理想的高发泡聚乙烯自熄型制品。     

新产品——钢带增强聚乙烯螺旋波纹管

钢带增强聚乙烯螺旋波纹管是一种创新的埋地排水管,把钢材的高刚度、高强度和聚乙烯的柔韧、耐腐结合在一起,突出的优点是环刚度高和节约原材料.     

Synthesis of oleyl oleate as a jojoba oil analog

Synthesis of a wax ester analog of jojoba oil was accomplished from oleic acid and oleyl alcohol with a zeolite as catalyst. A full 2³ factorial design at two levels has been used in the synthesis. The variables selected were temperature, reduced pressure and initial catalyst concentration. The most important variable within the range studied was temperature. Reduced pressure had a negative influence, and initial catalyst concentration showed a positive influence on the process. A response equation has been determined for the yield of ester. The properties of the synthesized product are similar to those of natural jojoba oil.