基于ARM微处理器的故障记录系统

给出了在普通数据采集基础上的故障记录系统的设计方案,利用ARM微处理器实现了模拟信号较完整的故障波形记录和开关信号的事件顺序记录(SOE)。对LPC2106ARM系列处理器、ADS7871模/数转换器以及数据通信接口等内容进行了讨论,阐述了系统的工作原理、软件处理方式、系统通信。该设计方案电路简单,特别适用于电力系统。     

空调器用盘式电机的计算机模拟

介绍线绕盘式永磁直流电流电动机的结构特点，设计原则和有关的主要设计公式，并进行电机的计算机模拟。模拟运行结果与样机实测数据基本相符。     

轻便型γ能谱测井仪几个关键技术问题的探讨

为研制性能好，功能强，微机化学程度高的轻便型γ能谱测井仪，针对非油气测井工作的井口径小（〈φ６０ｍｍ）井身浅（〈１０００ｍ）等特点，探讨了γ能谱测井仪的轻便化，测量精度，信号传输技术，稳谱技术及微机化等关键技术问题。     

寄生电容不敏感的开关电容乘法器的设计与分析

本文论述了寄生电容不敏感型开关电容四象限模拟乘法器的设计，并提出了一种新型的电路结构，分析了它的性能，以及元器件的非理想特性对其性能的影响和采取的补偿方法。     

WDB620高强钢应用于大型蜗壳的焊接制造工艺研究

2005年初,水电十四局承担了漫湾二期水电站和小湾水电站蜗壳的制造任务。蜗壳钢材选用国产600 MPa级别高强钢,为了全面综合地考核该级别钢种的材料强度和安全裕度,检验模拟大型蜗壳焊接制造工艺的可靠性。对国产的WDB620高强钢进行了可焊性和制造工艺性试验研究,并在国内首次设计、制造模拟压力容器并对其进行水压试验和爆破试验。研究成果通过中国水电集团公司鉴定,结论为该课题研究成果达到国内选进水平。     

GEOLOGICAL MODEL EVALUATION THROUGH WELL TEST SIMULATION: A CASE STUDY FROM THE WYTCH FARM OILFIELD, SOUTHERN ENGLAND

This paper presents an approach to the evaluation of reservoir models using transient pressure data. Braided fluvial sandstones exposed in cliffs in SW England were studied as the surface equivalent of the Triassic Sherwood Sandstone, a reservoir unit at the nearby Wytch Farm oilfield. Three reservoir models were built; each used a different modelling approach ranging in complexity from stochastic pixel‐based modelling using commercially available software, to a spreadsheet random number generator. In order to test these models, numerical well test simulations were conducted using sector models extracted from the geological models constructed. The simulation results were then evaluated against the actual well test data in order to find the model which best represented the field geology. Two wells at Wytch Farm field were studied. The results suggested that for one of the sampled wells, the model built using the spreadsheet random number generator gave the best match to the well test data. In the well, the permeability from the test interpretation matched the geometric average permeability. This average is the “correct” upscaled permeability for a random system, and this was consistent with the random nature of the geological model. For the second well investigated, a more complex “channel object” model appeared to fit the dynamic data better. All the models were built with stationary properties. However, the well test data suggested that some parts of the field have different statistical properties and hence show non‐stationarity. These differences would have to be built into the model representing the local geology. This study presents a workflow that is not yet considered standard in the oil industry, and the use of dynamic data to evaluate geological models requires further development. The study highlights the fact that the comparison or matching of results from reservoir models and well‐test analyses is not always straightforward in that different models may match different wells. The study emphasises the need for integrated analyses of geological and engineering data. The methods and procedures presented are intended to form a feedback loop which can be used to evaluate the representivity of a geological model.     

多孔普鲁士蓝类似物的合成及电催化析氧性能

采用一种简单易行的共沉淀法合成了前驱体镍铁普鲁士蓝类似物NiFe-PBA（NF）,然后通过溶剂热处理获得了镍铁普鲁士蓝纳米多孔材料（NFP）。通过XRD、SEM、TEM、XPS、BET及电化学方法对所得材料进行了结构表征和析氧性能测试。结果表明,NFP相对于前驱体NF,电化学比表面积增大、催化活性位点增多,电催化析氧反应（OER）性能显著提高。在浓度1 mol/L KOH水溶液中,达到10 mA/cm2电流密度时,NFP所需过电位仅为260 mV,比NF（320 mV）前驱体低18.75%,也优于大多数已报道的非贵金属催化剂和商用贵金属催化剂,显示出良好的应用前景。     

From Natural Methylation to Versatile Alkylations Using Halide Methyltransferases

Halide methyltransferases (HMTs) enable the enzymatic synthesis of S-adenosyl-l -methionine (SAM) from S-adenosyl-l -homocysteine (SAH) and methyl iodide. Characterisation of a range of naturally occurring HMTs and subsequent protein engineering led to HMT variants capable of synthesising ethyl, propyl, and allyl analogues of SAM. Notably, HMTs do not depend on chemical synthesis of methionine analogues, as required by methionine adenosyltransferases (MATs). However, at the moment MATs have a much broader substrate scope than the HMTs. Herein we provide an overview of the discovery and engineering of promiscuous HMTs and how these strategies will pave the way towards a toolbox of HMT variants for versatile chemo- and regioselective biocatalytic alkylations.     

滚动轮胎温度场的有限元模拟计算

在轮胎热学稳态分析的基础上，利用有限元非线性分析功能，开发滚动轮胎温度场有限元模拟计算软件。该软件建立在以下4个假设基础上：①轮胎处于动态平衡时的稳态温度场；②将轮胎的形状看作以旋转轴轴对称；③导热系数和比热容等物性视为常数；④不计轮胎接地时以热传导形式发生的接触热量传递。实例验证表明，数值模拟计算结果与实际测试结果的变化趋势基本一致。     

基于小波分析和遗传神经网络的模拟电路故障诊断方法*

针对BP网络极易收敛于局部极小点与过拟合等缺点,在构建小波神经网络的基础上,提出用遗传算法优化BP神经网络的模拟电路故障诊断方法.该方法使用小波作为预处理工具,经PCA分析和归一化后提取输出信号的能量信息作为特征向量,用遗传BP神经网络作为故障识别器,对模拟电路故障进行诊断.与传统BP神经网络相比较,结果表明,该方法可明显改善神经网络结构、提高故障诊断的精度和速度.