Four-year study of roughness patterns using weekly calibrations

In order to evaluate the stability and reproducibility of roughness measurements, calibrations of the same roughness standard were held over four years. Calibrations were performed in the Laboratório de Medição de Superfícies Ópticas (LMSO), on Mondays, between late January to early December every year. Here are presented and analyzed the calibration results and also the measurements of lab temperature and relative humid, at the time of calibration, in order to assess if there is any correlation between these influence factors in the obtained results. The LMSO lab is accredited by INMETRO (Brazilian NMI).     

Reproducibility of subjectively graded voluntary isometric muscle strength in unilateral and simultaneous bilateral exertion

Reproduction error of voluntary isometric muscle strength that was graded subjectively by the subject was investigated under unilateral and bilateral conditions. Six kinds of tasks, i.e. elbow flexion, elbow extension, hand grip, second digit abduction, knee extension and leg extension were employed. It was clear that absolute error (AE) increased with increase of exerted muscle strength in both unilateral and bilateral conditions. Mean of AE in each task was 4-5% of maximal muscle strength in the task in unilateral conditions. Algebraic or constant error (CE) decreased with increase of exerted strength. Demands for smaller strength tended to overshoot and larger ones tended to undershoot. In bilateral conditions when the different levels of strength for each limb were required to be exerted, AE on the weaker side tended to be larger than that in unilateral conditions. Thus a possibility that magnitude of AE might be affected by amount of attention was suggested. The subjectively graded criterion strength for a specific required level, when the strength was expressed as relative to the maximal strength, was almost the same in every task within a subject although it was different between subjects. It is suggested that each subject might have an awareness of relative magnitude of exerted strength.     

Visualization workflows for level-12 HUC scales: Towards an expert system for watershed analysis in a distributed computing environment

Visualization workflows are important services for expert users to analyze watersheds when using our HydroTerre end-to-end workflows. Analysis is an interactive and iterative process and we demonstrate that the expert user can focus on model results, not data preparation, by using a web application to rapidly create, tune, and calibrate hydrological models anywhere in the continental USA (CONUS). The HydroTerre system captures user interaction for provenance and reproducibility to share modeling strategies with modelers. Our end-to-end workflow consists of four workflows. The first is data workflows using Essential Terrestrial Variables (ETV) data sets that we demonstrated to construct watershed models anywhere in the CONUS (Leonard and Duffy, 2013). The second is data-model workflows that transform the data workflow results to model inputs. The model inputs are consumed in the third workflow, model workflows (Leonard and Duffy, 2014a) that handle distribution of data and model within High Performance Computing (HPC) environments. This article focuses on our fourth workflow, visualization workflows, which consume the first three workflows to form an end-to-end system to create and share hydrological model results efficiently for analysis and peer review. We show how visualization workflows are incorporated into the HydroTerre infrastructure design and demonstrate the efficiency and robustness for an expert modeler to produce, analyze, and share new hydrological models using CONUS national datasets.     

Investigating the effect of paper properties on color reproduction of digital printing

Digital printing is affected by several parameters including printer and paper type which determine the final printed color gamut and the quality of reproduction. For investigation of those effects, tests were done on the three types of laser printer and six types of paper with different properties of whiteness, roughness, and gloss. The gamut volume was generated by Eye-One spectrophotometer, ProfileMaker, and ColorThink software. Properties of the different types of paper were measured by the atomic force microscopy, spectrophotometer and, goniophotometer. Results showed that the reproducibility was considerably dependent on the type of printer and type of paper. High whiteness and gloss increased the color gamut volume, while high roughness decreased the reproducibility of the printer. Tests on paper properties showed that whiteness had the most significant effect on color gamut volume.     

Repeatability and Reproducibility techniques for the analysis of measurement systems

This research was conducted with the aim of analyzing two of the main metrological characteristics of any measurement system: Repeatability and Reproducibility. Both of these features play an important role in the analysis of the measurements and they can give us a lot of information about who and what influences any measuring system. The analysis of Repeatability and Reproducibility is generally carried out through the use of the study Gage R&R. This study permits to understand which are the decisive factors in a measurement system, and, definitively, if the process is stable, that is under statistical control or out of statistical control.     

A field comparison of four fungal aerosol sampling instruments: inter-sampler calibrations and caveats

Four bioaerosol samplers (Reuter Centrifugal, Andersen N6 Single Stage, Surface Air System Super 90, and Air-o-Cell) were used to take c. 300 side-by-side measurements at 75 public building sites. Regression models were developed to examine the relationships between each method pair. The models demonstrate that measurements from these instruments are not directly comparable, requiring inter-instrument calibration. Sampling location (indoor vs. outdoor) was a confounder in all the pairwise comparisons between samplers. In addition, the slopes of the relationships between all method pairs except one differed in indoor vs. outdoor locations. These results emphasize that direct comparisons between methods should not be undergone without prior calibration. Where measurement circumstances are similar to those of this study, the regression models might serve as a basis to convert measurements made with one instrument to those made with another. However, the robustness and generalizability of the models in different measurement settings needs to be assessed. PRACTICAL IMPLICATIONS: Many different bioaerosol sampling devices are in common use for indoor air quality studies. If data from research studies are to be compared, an approximation of the relationships between the equipment would be useful. A comparison of three culturable sampling devices (Andersen N6, SAS 90, RCS) and one particulate sampling device (Air-o-Cell) collecting simultaneous samples under field conditions showed high linear correlations between methods. However, while direct comparisons between sampling data were not possible, the regression models reported here explained 60-85% of the variance in fungal concentrations, and underscored the importance of the effect of environment on measurement.     

Preparation of SrBi 2 Ta 2 O 9 Thin Films by Liquid-Delivery MOCVD Without Additional Solvents

SrBi 2 Ta 2 O 9 thin films were prepared by ECR plasma enhanced metalorganic chemical vapor deposition (ECR-MOCVD) with a liquid-delivery system using one cocktail source without an additional solvent. The strontium-tantalum double alkoxide, Sr{Ta[OC 2 H 4 H(CH 3 ) 2 ](OC 2 H 5 ) 5 } 2 , was dissolved in stabilized trimethyl bismuth, Bi(CH 3 ) 3 / dioxane. This source system has been used in a conventional bubbling system. Deposition rate and the composition of the films were strictly controlled by the concentration and the composition of the cocktail source. Therefore, high reproducibility was realized by using this system. The constituent phase of the stoichiometric SBT film as-deposited at 500 C on a (111)Pt/TiO 2 /SiO 2 /Si substrate was a fluorite phase and transformed to the single phase of SBT by the post annealing at 800 C. It showed almost the same ferroelectricity as the stoichiometric composition film.     

RETRACTED: Reproducibility study of (TLD-100) dosimeters using an automated and manual TLD reader for radiotherapy applications

The precision of the response of Harshow thermoluminescent dosimeters (TLD-100) is investigated for two Harshow TLD readers. The mean reproducibility for chips pre-readout annealed at 100 °C for 15 min, evaluated with the manual planchet reader 4500, is 0.61% (1 standard deviation) using pre-readout method. When chips are evaluated with the automated hot-gas reader 4500, reproducibility values are undoubtedly worse, mean reproducibility for numerically stabilized dosimeters being equal to 2.12%(1 standard deviation) using pre-readout method also. The pre-readout method was used for elimination of lower temperature peaks in order to obtain more stability. These results indicate that the automated hot-gas 4500 reader, or, at least, the instrument used for the present measurements, is not adequate for chips evaluation, if precise and accurate dosimetry is required. The difference in precision for manual planchet reader is apparently due to geometry inconsistencies in the orientation of the planchet to imperfect chips faces during readout, requiring careful and manual reproducible arrangement of the selected chips faces in contact with the manual reader planchet. In order to elucidate this point, the planchet support face of all chips dosimeters was identified with a small point made by pencil, reducing in this way geometrical variations.