Thermotropic liquid crystalline polymer (Rodrun LC5000)/polypropylene in situ composite films: rheology, morphology, molecular orientation and tensile properties

In situ composite films were prepared by a two-step method. First, polypropylene and thermotropic liquid crystalline polymer (TLCP), Rodrun LC5000 (80 mol% p-hydroxy benzoic acid (HBA)/20 mol% polyethylene terephthalate (PET)), were melt blended in a twin-screw extruder and then fabricated by extrusion through a mini-extruder as cast film. Rheological behavior of the blends, morphology of the extruded strands and films, and tensile properties of the in situ composite films were investigated. Rheological behavior of the blends at 295 °C studied using a plate-and-plate rheometer revealed a substantial reduction of the complex viscosity with increasing TLCP content, and all specimens exhibited shear thinning behavior. Over the angular frequency range of 0.6-200 rad/s, the viscosity ratio (dispersed phase to matrix phase) was found to be very low, in the range of 0.03-0.07. Morphologies of the fracture surfaces of the blend extrudates and the film surfaces etched in permanganic solution were investigated by scanning electron microscope (SEM). The TLCP droplets in the extruded strands were seen with a progressive deformation into fibrillar structure when TLCP content was increased up to 30 wt%. In the extruded films, TLCP fibrils with increasing aspect ratio (length to width) were observed with increasing TLCP concentration. Orientation functions of each component were determined by X-ray diffraction using a novel separation technique. It was observed that the Young's modulus in machine direction of the extruded film was greatly improved with increasing TLCP loading, due to the increase in fiber aspect ratio and also molecular orientation.     

Testosterone production and spermatogenic damage induced by organophosphorate pesticides.

Parathion is an organophosphorate pesticide amply used in agriculture. Many alterations induced by organophosphorate pesticides have been described, such as: cytogenetic alterations in germinal cells, oligozoospermia and teratozoospermia in the mouse. The effect of Parathion, both pure (PP) and commercial (PC), on mouse interstitial cell testosterone production was evaluated in vivo and in vitro. Male mice were intraperitoneally injected with a single dose of 1/3 LD50 of Parathion, both PP and PC. The animals were sacrificed at 1, 8 and 40 days post injection to evaluate the impact of disrupting testosterone production on spermatogonia, spermatocytes and elongated spermatids. The plasma testosterone was assayed by standard radioimmunoanalysis. The same method was used to assay testosterone in the culture medium of interstitial cells obtained from the control and Parathion treated animals at the same time intervals. Sperm count, sperm teratozoospermia and tubular blockage were analyzed for an appraisal of spermatogenesis. Increase in the teratozoospermia and tubular blockage was detected in the PP and PC group at 8 and 40 days post injection. Plasma testosterone levels drop significantly at 8 days and recovered slowly at 40 days only in PP animals as detected in vivo, implying interference of testicular steroidogenesis due to the toxicant. Recuperation of normality occurs at long time intervals. In conclusion, Parathion disturbs the synthesis of testosterone in mice affecting qualitatively the spermatogenesis