嵌入式操作系统在HDTV机顶盒中的应用

介绍一个高清晰度电视机顶盒方案中软件系统的系统结构，阐述了机顶盒软件中使用的嵌入式操作系统STLite/OS20的原理及其特点，并举例说明了这个嵌入式操作系统在机顶盒系统中的使用。     

基于数字机顶盒的电子选单的设计和实现

基于CATV和PSTN的VOD多媒体数字机顶盒，提出了几种实现双向通信以完成电子节目指南的设计方案，对各种方案的优缺点进行了详细的讨论，并介绍了所采用方案的实现方法。     

影响有线数字电视机顶盒发展的因素

从用户需求、节目源、价格、资金、行业体制等方面论述了影响有线数字电视机顶盒发展的因素。     

PVR机顶盒文件存储系统的设计与实现

简要介绍了具有PVR功能的机顶盒，具体描述了PVR存储系统硬件与软件的设计与实现，重点讨论了PVR的关键部分——文件存储系统的设计和实现。     

交互电视机顶盒功能与构成剖析

机顶盒是交互式电视中重要的组成部分。目前，世界各大公司都在大力研究和开发机顶盒的新产品。本文阐述了机顶盒在交互式电视中所起的作用，并对机顶盒的结构和工作原理作了详细分析。     

基于BCM3540的高清晰度数字电视机顶盒的硬件设计

介绍一种基于BCM3540的高清晰度数字电视机顶盒的硬件设计方案,该方案采用1块主芯片BCM3540及1块协处理器BCM7411,能够处理MPEG-2高清、标清以及H.264高清、标清信号,可以直接支持PCMCIA接口实现机卡分离,并具有32位PCI总线,可以很方便地进行功能扩展。     

Polymerization strategies to overcome limiting monomer conversion in silicone-acrylic miniemulsion polymerization

The limiting conversion phenomenon observed in high solid content silicone-modified acrylic miniemulsion polymerizations was investigated. It was found that the limiting conversion was mainly due to the formation of inactive radicals upon propagation of butyl acrylate radicals with the vinyl end groups of the polydimethylsiloxane. Polymerization strategies that allowed overcoming this problem and achieving high monomer conversion were implemented.     

Comparison of RAFT polymerization of methyl methacrylate in conventional emulsion and miniemulsion systems

In this study, we have conducted the reversible addition-fragmentation chain transfer (RAFT) polymerization of methyl methacrylate (MMA) in two heterogeneous systems, i.e. conventional emulsion and miniemulsion, with identical reaction conditions. The main objective is to compare the living character in both systems according to the nucleation mechanism, the latex stability, the particle sizes and particle size distributions of latexes, the molecular weights and molecular weight distributions (or polydispersity index, PDI) of PMMA, and the kinetics of the RAFT polymerization. The RAFT agent used in both systems was 2-cyanoprop-2-yl dithiobenzoate (CPDB). The effects of an oil-soluble initiator 2,2′-azobisisobutyronitrile (AIBN) and a water-soluble initiator kalium persulfate (KPS) on the RAFT/emulsion and RAFT/miniemulsion polymerizations were investigated. Methyl-β-cyclodextrin (Me-β-CD) was used as a solubilizer. The average molecular weights and molecular weight distributions (PDIs) of dried PMMA samples were characterized by gel permeation chromatography (GPC). The experimental results showed that the RAFT/miniemulsion polymerization of MMA exhibited better living character than that of RAFT/emulsion polymerization under the conditions of our experiment. The PDI of PMMA in RAFT/miniemulsion polymerization was decreased with the addition of Me-β-CD. However, Me-β-CD did not have influence on the PDI of PMMA prepared in RAFT/emulsion polymerization.     

Reversible addition fragmentation transfer (RAFT) polymerization of styrene in a miniemulsion: A mechanistic investigation

The RAFT polymerization of styrene in miniemulsion using 1-phenylethyl phenyl-dithioacetate (PEPDTA) as a RAFT agent was investigated, in attempt to reveal the mechanism for the often observed inferior performance such as low polymerization rate, broad molecular weight distribution and particle size distribution in the RAFT miniemulsion polymerization with regular levels of surfactant and co-stabilizer (1 wt% sodium dodecyl sulfate and 2 wt% hexadecane). It is strongly evident that a few of large oligomer particles consisting of oligomer, RAFT agent (RAFT agent refers to the original RAFT agent), and monomer would be formed in the early stage of the polymerization due to the superswelling of the first nucleated droplets. With the regular levels of surfactant and co-stabilizer, the observed low polymerization rate, broadened molecular weight distribution, slow conversion of the RAFT agent, lower N_p, and broadened particle size distribution could be well explained by the formation of these large oligomer particles and their prolonged existence. When the formation of the oligomer particles was suppressed by increasing surfactant and co-stabilizer levels and wise selection of types of RAFT agent, the molecular weight distribution could be narrowed to around 1.3 and particle size distribution could be close to that of the conventional non-living miniemulsion polymerization.     

通过细乳液聚合方法制备自交联型有机硅乳液

苯乙烯与甲基丙烯酸-3-三甲氧基硅丙酯(M PS)经细乳液聚合,制得了稳定的自交联型的水分散涂料,用透射电子显微镜(TEM)、动态光散射仪(DLS)和红外光谱(IR)表征了乳胶粒的形态和结构。发现与传统乳液聚合相比,细乳液聚合法可显著提高乳液的稳定性,且M PS加入量的增加会导致乳液稳定性降低。