The correlation of texture and magnetic properties in Co-Cr films

This investigation focuses on the correlation between the crystallographic orientation of grains with respect to magnetic properties in Co-Cr films. Based on a distribution measured for the (0002) crystallographic pole densities, modified formulae describing the texture were used to calculate the coercivity Hc, the squareness ratio Rs (Mr⊥/TMs) and the anisotropy field Ha for Co-Cr films. In general, calculated values for the coercive force He agreed well with the measured values. The calculated Rs⊥. values were much larger than the measured ones, however, indicating that the influence of the demagnetizing field and the magnetostriction on the orientation of the magnetization cannot be neglected. On leave from Institute of Computing Technology, Academia Sinica, P.O.Box 2704-6, Beijing, P.R. China.     

消除非合金奥贝球铁中锰偏析的工艺

研究了消除非合金奥贝球铁中锰[w(Mn)=0.8%]偏析和不利影响的工艺措施。通过增加硅含量，强化孕育处理，降低奥氏体化温度及等温淬火后进行回火处理等措施，均可消除锰含量增高对组织和性能的不利影响。     

Heavy arsenic doping of silicon grown by atmospheric pressure selective epitaxial chemical vapor deposition

Selective epitaxial Si with a high arsenic concentration of 2.2×10¹⁹ atoms/cm³ was deposited at a high growth rate of 3.3 nm/min under atmospheric pressure. It was confirmed that this method had excellent selectivity and produced films having good crystalline quality, abrupt dopant profiles at the interfaces, and smooth surfaces. The growth mechanism is discussed in terms of the relationship between the effects of arsenic surface segregation and etching by hydrogen chloride.     

Corrosion failure of Zn–Al detonator housing

Some batches of detonator housings made up of Chromium plated Zn–Al alloy were found in an extensively cracked condition after few months of storage at room temperature. An analysis of the failure showed that the cracks were due to intergranular corrosion facilitated by segregation of lead at the grain boundaries. Improper chromium plating further aggravated the corrosion problem. This failure case emphasises the need for strict control of chemical composition for components made from Zn–Al alloy and the process of Cr plating of the components.     

流化床二组分混合物的适宜分离气速

在等密度与非等密度二组分混合物分离体系中，考察操作气速对分离度的影响，提出物料的静床高对高效分离气速没有影响，而操作气速取其混合物最小流化速度的１．２倍左右时，二组分混合物产生高效分离，并且此操作气速随着二组分混合物分离状态的判定值（等密度混合物指Ｒｍｆ值，非等密度混合物主要指Ｒｐ值）的增加而拓宽。     

Size segregation in gas-solid fluidized beds with continuous size distributions

Discrete-particle simulations of a gas-solid fluidized bed are used to investigate the species segregation (de-mixing) behavior of systems with continuous particle size distributions. Both Gaussian and lognormal distributions are investigated over a range of distribution widths, restitution and friction coefficients, and gas velocities. The results indicate that: (i) the average particle diameter decreases as the height within the bed increases, (ii) the level of segregation increases with an increase in the width of the particle size distribution, and (iii) segregation is attenuated as bubbling becomes more vigorous. Furthermore, the shape of the local size distribution (i.e., Gaussian or lognormal) is found to mimic that of the overall size distribution in most regions of the fluidized bed.     

Planar and axially symmetric slow shearing granular flows: a comparative evaluation of assembly evolution incorporating wavelet transforms

We demonstrate the enhanced capacities of our analysis toolset for three-dimensional data. In particular, we provide supporting evidence for some of the conclusions reached in our previous studies of two-dimensional avalanching heaps. Segregation by self-diffusion is shown to take place in three-dimensional assemblies and self-diffusion velocities are shown to be of a comparable order of magnitude to those found in plane-strain situations. The effect on assembly evolution by discrete avalanching of the availability of a third dimension for translation is investigated. The discrete wavelet transform is again shown to be a useful component of the toolset in coupling process variables in the context of the discrete defining events associated with assembly evolution. In particular, we move towards the determination of time constants by correlating wavelet coefficients with a time shift.     

Geotechnical behavior of uranium mill tailings from Saskatchewan,Canada

This paper investigates the geotechnical behavior of uranium mill tailings from Saskatchewan, Canada.The 4% tailings were well-graded with 29% fines whereas the 5% and 6% tailings were gap-graded with 49% fines. All samples exhibited a negligible strength(0.4 k Pa) up to 60% solids, followed by a rapid increase. The 4% tailings exhibited a lower rate and amount of settlement than 5% and 6% tailings. The kidecreased from 10~(-2)to 10~(-4)m/s with a decrease in eifrom 16 to 4 and a decrease in ef from 8 to 4 such that 4% tailings showed one order of magnitude lower values than the 5% and 6%tailings. The settling potential decreased ten times(50%–5%) for 4% tailings and four times(60%–15%)for 5% and 6% tailings. The effective stress increased from 80 to 260 Pa in the settling tests. The 4%tailings were less prone to segregation when compared with 5% and 6% tailings. The average solids content after settling was 35% for 4% tailings, 40% for 5% tailings and 39% for 6% tailings with a solids content deviation of ±3%, ±8%, ±6%, respectively. All materials were essentially non-segregating at 40%initial solids.     

Herleitung und Validierung eines einfachen Modells zur Beschreibung des Misch- und Entmischungsprozesses beim Feststoffmischen

Discontinuous solids mixing processes are largely carried out over the mixing time. The required mixing time is often determined separately in mixing tests. It remains to be seen whether this corresponds to the optimum. There is a lack of models to describe the mixing quality curve over time. The present article adds a simple, two-parameter model that considers not only the homogenization but also the segregation process. In this way, possible mixing quality optima can be approximated with the help of fewer mixing tests that have been carried out.