Wet chemical synthesis of Gd+3 doped vanadium Oxide/MXene based mesoporous hierarchical architectures as advanced supercapacitor material

In this paper, Gd³⁺ doped V₂O₅/Ti₃C₂T_x MXene (GVO/MX) hierarchical architectures have been synthesized by wet chemical approach. As prepared GVO/MX composite, along undoped VO and unsupported GVO were well characterized by XRD, FESEM, EDX, FT-IR and BET techniques. Electrochemical performance of VO, GVO and GVO/MX was evaluated by CV, GCD and EIS measurements. Among the three electrodes, GVO/MX composite exhibited highest electrochemical activity with the optimum specific capacitance of 1024 Fg^-1 at 10 mVs^?1. The specific capacitance of GVO/MX was ～1.7 and ～3 times higher than unsupported GVO (585 Fg^-1) and VO (326 Fg^-1), respectively. The cyclic life of GVO/MX with capacitance retention 96.12% was observed at 60 mVs^?1. EIS measurements showed reduction in electrochemical impedance for GVO/MX as compared to GVO and VO. The corresponding impedance values of Rct and Resr for GVO/MX were calculated as 18 Ω and 1.8 Ω, respectively. The superior capacitive ability of GVO/MX can be ascribed to its unique morphology, short diffusion path and high surface area of fabricated composite. Considering it, the present work provides a feasible strategy to fabricate highly effective electrode materials for next generation energy storage devices.     

Inductive effect in Mn-doped ZnO nanoribon arrays grown on Ni foam: A promising key for boosted capacitive and high specific energy supercapacitors

Transition metal oxides have been explored in supercapacitor applications owing to their safety, low cost, high specific capacitance and high electrochemical activity. Among all transition metal oxides, zinc oxide based materials show remarkable response for designing the supercapacitors with high electrochemical activity. Here in, Mn doped ZnO (Zn_1-xMn_xO₃ with x = 0, 0.25, 0.50, 0.75 and 1) was synthesized by a facile hydrothermal method. Doping of Mn into the ZnO increased the surface area and decease the charge transfer resistance for the Zn_0.5Mn_0.5O₃. All the synthesized materials were characterized by x-ray diffraction (XRD), scanning electron microscopy SEM), BET, electrochemical tests and other various analytical techniques to confirm the structural, morphological, textural and suprcapacitive properties. The synthesized material Zn_0.5Mn_0.5O₃ having the porous nanoribons structure with BET surface area (2490 cm²/g). The electrochemical studies showed significantly enhanced response toward pseudocapacitive nature. The synthesized material exhibited the excellent specific capacitance (515F/g), specific energy (28.61 Wh/kg) and specific power (1000 W/kg) at current density of 2 mA/g. Such impressive and superior properties make the MnZnO₃ material as promising candidate for new generation supercapacitor applications.     

Experimental investigation of Co and Fe-Doped CuO nanostructured electrode material for remarkable electrochemical performance

The current research work presents a facile and cost–effective co-precipitation method to prepare doped (Co & Fe) CuO and undoped CuO nanostructures without usage of any type of surfactant or capping agents. The structural analysis reveals monoclinic crystal structure of synthesized pure CuO and doped-CuO nanostructures. The effect of different morphologies on the performance of supercapacitors has been found in CV (cyclic voltammetry) and GCD (galvanic charge discharge) investigations. The specific capacitances have been obtained 156 (±5) Fg^?1, 168(±5) Fg^?1 and 186 (±5) Fg^?1 for CuO, Co-doped CuO and Fe-doped CuO electrodes, respectively at scan rate of 5 mVs^?1, while it is found to be 114 (±5) Fg^?1, 136 (±5) Fg^?1 and 170 (±5) Fg^?1 for CuO, Co–CuO and Fe–CuO, respectively at 0.5 Ag^-1 as calculated from the GCD. The super capacitive performance of the Fe–CuO nanorods is mainly attributed to the synergism that evolves between CuO and Fe metal ion. The Fe-doped CuO with its nanorods like morphology provides superior specific capacitance value and excellent cyclic stability among all studied nanostructured electrodes. Consequently, it motivates to the use of Fe-doped CuO nanostructures as electrode material in the next generation energy storage devices.     

Energy storage devices for future hybrid electric vehicles

Powertrain hybridization as well as electrical energy management are imposing new requirements on electrical storage systems in vehicles. This paper characterizes the associated vehicle attributes and, in particular, the various levels of hybrids. New requirements for the electrical storage system are derived, including: shallow-cycle life, high dynamic charge acceptance particularly for regenerative braking and robust service life in sustained partial-state-of-charge usage. Lead/acid, either with liquid or absorptive glass-fibre mat electrolyte, is expected to remain the predominant battery technology for 14 V systems, including micro-hybrids, and with a cost-effective battery monitoring system for demanding applications. Advanced AGM batteries may be considered for mild or even medium hybrids once they have proven robustness under real-world conditions, particularly with respect to cycle life at partial-states-of-charge and dynamic charge acceptance. For the foreseeable future, NiMH and Li-ion are the dominating current and potential battery technologies for higher-functionality HEVs. Li-ion, currently at development and demonstration stages, offers attractive opportunities for improvements in performance and cost. Supercapacitors may be considered for pulse power applications. Aside from cell technologies, attention to the issue of system integration of the battery into the powertrain and vehicle is growing. Opportunities and challenges for potential “battery pack” system suppliers are discussed.     

An in situ Raman study of the intercalation of supercapacitor-type electrolyte into microcrystalline graphite

An initial Raman study on the effects of intercalation for aprotic electrolyte-based electrochemical double-layer capacitors (EDLCs) is reported. In situ Raman microscopy is employed in the study of the electrochemical intercalation of tetraethylammonium (Et₄N⁺) and tetrafluoroborate (BF₄⁻) into and out of microcrystalline graphite. During cyclic voltammetry experiments, the insertion of Et₄N⁺ into graphite for the negative electrode occurs at an onset potential of +1.0 V versus Li/Li⁺. For the positive electrode, BF₄⁻ was shown to intercalate above +4.3 V versus Li/Li⁺. The characteristic G-band doublet peak (E_2g2(i) (1578 cm⁻¹) and E_2g2(b) (1600 cm⁻¹)) showed that various staged compounds were formed in both cases and the return of the single G-band (1578 cm⁻¹) demonstrates that intercalation was fully reversible. The disappearance of the D-band (1329 cm⁻¹) in intercalated graphite is also noted and when the intercalant is removed a more intense D-band reappears, indicating possible lattice damage. For cation intercalation, such irreversible changes of the graphite structure are confirmed by scanning electron microscopy (SEM).     

Preparation of NiCoFe-hydroxide/polyaniline composite for enhanced-performance supercapacitors

Ternary NiCoFe layer hydroxides with different Ni/Co/Fe molar ratios were prepared using simple urea method. By finely tuning Ni/Co/Fe molar ratio, the optimized hydroxide (LDH_2.0), a Ni/Co/Fe molar ratio of 2.0/1.0/1.0, provided high specific capacitance (408 F g⁻¹ at 2.0 A g⁻¹) and good stability (90.9% retention over 1000 cycles) due to maximum crystallinity (91.35% crystallinity) and specific surface area (160 m² g⁻¹). In order to further improve the electrochemical performances, the LDH_2.0 was made into a composite (LDH/PANI) with polyaniline (PANI) via in situ polymerization of aniline monomer. The LDH/PANI composite had a much higher specific capacitance (717 F g⁻¹ at 2.0 A g⁻¹) compared with the LDH_2.0, and a significant improvement of cycleability (84.7% retention over 1000 cycles). The results indicated that the LDH/PANI had a synergistic effect of both components due to the complementary properties, which guaranteed a good electric contact and consequently increased the specific capacitance. These provided a new approach for designing organic-inorganic composite materials with potential application in supercapacitors.     

High-density oxygen-enriched graphene hydrogels for symmetric supercapacitors with ultrahigh gravimetric and volumetric performance

The contradiction between the porous structure and density of graphene materials makes it unable to meet the dual requirements of the next generation supercapacitors for gravimetric capacitance and volumetric capacitance. Herein, we successfully synthesized high-density oxygen-enriched graphene hydrogels (HOGHs) by a one-step hydrothermal method using high concentration graphene oxide (GO) solution and trometamol as precursors. The as-prepared HOGHs samples present a dense 3D network structure and moderate specific surface areas, which leads to a high packing density. In addition, the HOGHs samples also contain abundant oxygen-containing functional groups and some nitrogen-containing functional groups. These heteroatomic functional groups can provide pseudocapacitance for the electrode materials. Therefore, the HOGH-140 based symmetric supercapacitor shows ultrahigh gravimetric and volumetric specific capacitance (325.7 F g⁻¹, 377.8 F cm⁻³), excellent rate performance and cycling stability. Simultaneously, the symmetric binder-free supercapacitor exhibits high gravimetric specific energy density (11.3 Wh kg⁻¹) and volumetric specific energy density (13.1 Wh L⁻¹) in 6 M KOH, respectively. These outstanding properties make the material have a good application prospect in the field of compact energy storage devices.     

Sol-gel synthesis of ternary conducting polymer hydrogel for application in all-solid-state flexible supercapacitor

In this contribution, we reported the preparation of a novel conducting polymer hydrogel (CPH) by a sol-gel method, which was subsequently employed to fabricate a flexible all-solid-state supercapacitor device. Taking advantage of the synergistic effects of the different components in the conducting polymer hydrogel and the merits of the proposed synthesis strategies, the prepared supercapacitor device with CPH as electrode exhibited high area-normalized capacitance (2.2 F cm⁻²), high gravimetric capacitance (1573.6 F g⁻¹) as well as high energy density of 0.18 mWh cm⁻² (or 128.7 Wh Kg⁻¹) at 0.08  mW cm⁻² (or 55.1 W kg⁻¹). This study did not only represent a novel all-solid-state, high performance, flexible supercapacitor with potential applications in flexible energy-related devices, but also developed a new method for enhancing capacitances and mechanical stability of all-solid-state flexible supercapacitor.     

Binder free and high performance of sputtered tungsten nitride thin film electrode for supercapacitor device

Here, we demonstrates the fabrication of binder free and very efficient supercapacitor electrode based on tungsten nitride (W₂N) thin film on stainless steel (SS) substrate using reactive sputtering technique. W₂N thin film as a working electrode exhibits high specific capacitance (163 F g⁻¹ at 0.5 mA cm⁻² in 1 M H₂SO₄) along with excellent cycling stability. The binder free symmetric supercapacitor (W₂N||W₂N) device delivers a high specific capacitance (80 Fg^-1) and long life span (90.46% capacitance retention after 10,000 cycles) along with high energy (12.92 Whkg⁻¹) and power (∼674 kWkg⁻¹ at 9.36 Whkg⁻¹) densities. These observed excellent electrochemical performances of the present W₂N thin film based supercapacitor device, recommend it as a potential candidate for energy storage applications.     

An innovating application of PEM fuel cell: Current source controlled by hydrogen supply

Fuel cells are complex systems which can be considered as low voltage electrical source. Preliminary investigations led with a single proton exchange membrane fuel cell, either short-circuited or hybridized by discharged supercapacitors, could evidence the behavior as a current source, in which the current is directly controlled by the hydrogen flow rate. This operation mode imposes the fuel cell voltage to be far below the threshold recommended by the fuel cell manufacturer. The paper deals with this unusual application of fuel cell and its benefits such as the high quality current, free of oscillations that might be upgraded for superconducting coil supply. To investigate this operation mode an appropriate single fuel cell model is established and then validated by means of a test bench equipped with a proton exchange membrane single fuel cell.