Exergoeconomic performances of the desiccant-evaporative air-conditioning system at different regeneration and reference temperatures

This paper presented the exergoeconomic evaluation of the developed desiccant-evaporative air-conditioning system. The developed system was evaluated based on the steady-state conditions at different regeneration and reference temperatures. The exergoeconomic evaluation method was implemented to the system components and the whole system to evaluate the exergy efficiency, exergy destruction ratios, cost rates, relative cost differences and exergoeconomic factors. The regeneration and reference temperatures affected the exergy efficiencies, exergy destruction ratios, cost rates, relative cost differences and exergoeconomic factors. The desiccant wheel, heating coil and evaporative cooler had a high cost rate (investment cost, operation and maintenance cost, and exergy destruction cost). The exit air fan, outdoor air fan and evaporative cooler had a high relative cost difference. The exit air fan, outdoor air fan and secondary heat exchanger had a high exergoeconomic factor. Replacement of the desiccant wheel with a higher dehumidification performance could decrease the high cost rate. A higher efficiency evaporative cooler and heating coil were needed. Cheaper air fans (outdoor air fans and exit air fans) were needed.     

基于TS101型DSP链路口的多通道高精度数据采集电路设计

介绍一种基于数字信号处理器(DSP)TS101链路口的多通道高精度数据采集电路的设计方法,详细阐述利用多个ADS8361型A/D转换器进行数据采集,并经TS101链路口传输数据的FP-GA和DSP设计实现,讨论如何提高A/D转换精度的问题.     

Saturated liquid viscosities and densities of environmentally acceptable hydrochlorofluorocarbons (HCFCs)

Measurements of saturated liquid viscosities and densities were performed on environmentally acceptable hydrochlorofluorocarbons (HCFCs), CH₃CCl₂F (HCFC-141b), CH₃CClF₂ (HCFC-142b; only for viscosity), CF₃CF₂CHCl₂ (HCFC-225ca), and CClF₂CF₂CHClF (HCFC-225cb), using a capillary viscometer and a glass pycnometer in the temperature range from 273 to 353 K. The uncertainty in the measurement of viscosity is estimated to be 5% based on the comparison of the present data with those in the literature for HCFC-141b. An equation is given to represent our saturated liquid viscosity data as a function of temperature.     

添加微量铝对TS-2合成及苯酚羟基化的影响

以硅溶胶为硅源合成分子筛TS 2时 ,在溶胶制备过程中添加微量的铝 ,可以降低模板剂氢氧化四丁基铵 (TBAOH)的用量 ,当TBAOH/SiO2 降低到 0 .1以下时 ,仍然合成了性能优良的TS 2 ,而且用于苯酚过氧化氢羟基化反应过程中催化活性也大大提高。所得催化剂用XRD ,IR ,ICP进行了表征     

OMA协议下的TS节目DRM解决方案

数字版权保护技术已经成为网络电视中除了视频编码技术以外的又一项核心技术。它用于保护内容所有人的版权,控制客户对于内容的使用。文章在阐述OMADRM标准的基础上,提出了一种适应国内广电系统实际播控环境的TS制式节目的DRM解决方案,并根据自行开发的演示系统,就其加密效率加以论证。     

Enantioseparation of catechin and epicatechin in plant food by chiral capillary electrophoresis

The enantiomers of catechin and epicatechin were separated by chiral capillary electrophoresis using modified cyclodextrins as chiral selectors. Various conditions for the separation system were optimized, including the pH value and the concentration of the running buffer. A baseline separation of the catechin and epicatechin enantiomers could be achieved by using 0.1 mol l⁻¹ borate buffer (pH 8.5) with 12 mmol l⁻¹ (2-hydroxypropyl)-γ-cyclodextrin as chiral selector, a fused-silica capillary with 40 cm effective length (75 μm I.D.), +18 kV applied voltage, a temperature of 20 °C and direct UV detection at 280 nm. The method was applied to different plant food samples. (+)-Catechin and (−)-epicatechin could be verified as the most common flavan-3-ols. In the case of guaraná, however, we were able to identify all four enantiomers, both (+)- and (−)-catechin and (+)- and (−)-epicatechin, as naturally occurring compounds. This finding was verified by further isolation and purification of the flavan-3-ols and subsequent LC–MS analysis. This method allows for the identification of the authenticity of guaraná through the analysis of the catechin and epicatechin enantiomers, additionally to the conventional methods like HPLC.     

DTV TS输出平台的建立

论证了将软件编码的数字电视传输流数据文件转换成并行码流输出的软硬件实施方案 ,并给出了研制的系统。系统基于微机构筑 ,工作于 Windows环境 ,编码制式、参数以及输出码率等可灵活设定 ,可作为数字电视系统测试信号源。     

基于TS201的信号处理软件设计

基于TS201处理器的软件优化设计,对于提高运算效率和运行稳定性是非常关键的。结合具体项目和实际工作经验,对如何正确利用TS201处理器的各种资源进行了分析,并提出了优化设计方法。按此方法设计的信号处理软件已成功应用到了某探测系统中,实现了系统提出的各种功能,并满足实时性要求,软件运行稳定,验证了所提方法的正确性。     

强化两相混合的超临界技术制备聚乳酸微粒

针对商品化聚乳酸微球粒径分布较宽难于适用气溶胶给药要求的不足,采用水力空化混合强化超临界流体辅助雾化技术(SAA-HCM)制备聚乳酸(PLA)超细微粒.该技术主要特点是通过在超临界流体和液相进料处引入水力空化混合器,强化两相间的混合.考察SAA-HCM过程混合器压力、温度、沉淀器温度、进料中CO2与液体溶液质量流量比和溶液质量浓度等操作参数对微粒形态和粒径分布的影响,成功制备出球形度较好,粒径分布较窄(1～3μm)的PLA微球.经X射线衍射(XRD)分析和差示扫描量热(DSC)分析显示,与原料PLA相比,微球晶型及热曲线变化不大,但结晶度下降.同时把操作参数与相行为进行关联,探讨了影响颗粒形貌的机理.对比超临界流体辅助雾化法(SAA)的实验结果表明:水力空化的引入能有效强化混合器内的两相传质,混合更好,能制备出适用于气溶胶给药要求的超细微粒.     

Decentralized Networked Control System Design Using Takagi-Sugeno (TS) Fuzzy Approach

This paper proposes a new method for control of continuous large-scale systems where the measures and control functions are distributed on calculating members which can be shared with other applications and connected to digital network communications.At first, the nonlinear large-scale system is described by a Takagi-Sugeno(TS) fuzzy model. After that, by using a fuzzy LyapunovKrasovskii functional, sufficient conditions of asymptotic stability of the behavior of the decentralized networked control system(DNCS),are developed in terms of linear matrix inequalities(LMIs). Finally, to illustrate the proposed approach, a numerical example and simulation results are presented.