可节约生产成本的湿处理工艺技术

从传统意义上来讲，针织物及对张力敏感的梭织物的湿处理生产线（包括漂白、染色、柒色后水洗）通常是利用染缸来完成的，而这正是高水耗、高蒸汽消耗和高能源消耗的症结所在，同时带来一些质量问题（如折痕、起毛球和刮印等）。随着现代连续式平幅湿处理线技术的发展，整体生产成本可以下降到最多这50％。介绍了德国欧宝泰克生产的敏感织物连续式平幅湿处理线设备。     

Photoresponsive peptide and polypeptide systems: part II. Photochromism of poly(l-ornithine) containing various azo-contents in side chains

Poly(L-ornithine)s having various azo-contents in the side chains were synthesized by the water-soluble carbodiimide procedure. The photochemical properties of the polypeptides poly[N^δ-p-(phenylazo)benzoyl-L-ornithine] (PPABLO) containing 3–77 mol% azobenzene were investigated by absorption and circular dichroism spectroscopy in hexafluoro-2-propanol (HFIP) or water, and in HFIP-water or methanol-water solvent mixtures. The photochromism of the dichroic bands of the PPABLOs containing 20–77 mol% azobenzene in the visible and ultraviolet wavelength regions was found to be mostly reversible as a function of irradiation time at different wavelengths due to the photostationary state (above 80% trans-cis photoisomerization) of the azo aromatic moieties. The PPABLO containing 3.2 mol% azobenzene in water exhibited conformational changes from random coil to helix by the addition of methanol or sodium dodecyl sulphate (SDS). The photo-induced conformational change was observed in HFIP-water-SDS solvent mixtures, while no conformational change was seen in water and HFIP-water solvent mixtures.     

毛/涤纱分散/酸性(媒染)染料一浴法筒子染色工艺

毛/涤纱分散/酸性(媒染)染料一浴法筒子染色工艺,在100℃条件下能满足毛、涤两种纤维同时上染,染色产品具有着色深浓鲜艳,色泽一致,各项牢度符合要求,对纤维无损伤等优点,从而缩短生产时间,降低成本,提高经济效益。     

涤纶超细仿麂皮织物染整实践

介绍了涤纶超细仿麂皮织物的染整加工工艺，重点分析了前处理、染色等关键工序，并给出了具体工艺参数。     

无捻毛巾产品毛羽问题的分析与实践

对无捻毛巾产品毛羽问题进行了分析,对成因进行了初步探索.通过试验,制定了较为有效的改进措施和工艺.无捻毛巾制品的毛羽问题得到改善,并控制在一个较为合理的范围内.     

皮革染色助剂的合理使用对染色效果的影响

研究了皮革工业上广泛使用的一些染色助剂以及我们自主研发的APA匀染增艳剂、DA增深固色剂的合理使用对皮革染色的影响,重点考察了它们的匀染、增深、增艳和固色作用.     

蚕蛹蛋白纤维染色性能的研究

由粘胶和蚕蛹蛋白混纺而成的蚕蛹蛋白纤维，采用双活性基活性染料染色，对染色工艺条件作了重点试验。结果表明，pH值和温度是最大的影响因素，该纤维适宜低温、pH值近中性条件下上染和碱性条件下固色。     

Response surface methodology applied for Orange II photocatalytic degradation in TiO2 aqueous suspensions

BACKGROUND: Heterogeneous photocatalysis is influenced by a number of parameters involving synergistic effects; hence, an experimental strategy design that considers interactions between the main variables is needed. The response surface methodology was applied for the investigation of photodegradation of 20 mg L^?1 Orange II in aqueous solutions and for optimization of color removal efficiency. Preliminary studies were performed to identify the parameters to be selected for optimization. RESULTS: The input variables considered for experimental design were: solution initial pH, oxidizing agent (H₂O₂) initial concentration and UV‐A irradiation time. The multivariate experimental design allowed the development of a quadratic response surface model to be used for the prediction of color removal efficiency over the full range of the experimental region. Under the optimum conditions established in the region of experimentation (pH = 6.9, [H₂O₂]₀ = 183 mg L^?1 and t = 32 min), a 100% color removal efficiency was obtained in experiments. CONCLUSIONS: It was found that the variables considered have important effects on color removal efficiency. The results demonstrate that the use of experimental design strategy is indispensable for successful investigation and adequate modeling of the process because the interdependence of the reaction parameters cannot be neglected. Copyright © 2008 Society of Chemical Industry     

计算机配色技术应用于木材染色初探

介绍了计算机测色配色系统的原理,研究了建立木材染色基础数据库的方法,提出了注意事项,并分析了自动配色过程中产生色差的原因及解决方法。