Categorical observers for metamerism

A method is proposed to generate categorical colour observer functions (individual colour matching functions) for any field size based on the CIE 2006 system of physiological observer functions. The method combines proposed categorical observer techniques of Sarkar et al with a physiologically-based individual observer model of Asano et al and a clustering technique to produce the optimal set of categorical observers. The number of required categorical observers varies depending on an application with as many as 50 required to predict individual observers' matches when a laser projector is viewed. However, 10 categorical observers are sufficient to represent colour-normal populations for personalized colour imaging. The proposed and recommended categorical observers represent a robust and inclusive technique to examine and quantify observer metamerism in any application of colorimetry.     

矿石中金的快速测定

研究了活性炭纤维滤布富集分离的条件和解脱方法,并利用微波溶样、液珠萃取比色法测定矿石中的金。该方法的测定范围为(0.5~xx)×10-6,相对标准偏差RSD为3.2%,可用于矿石中金的野外快速测定。     

Bandwidth correction for LED chromaticity

The spectral bandwidth formulae of Stearns and Stearns   are generalized for an arbitrary slit function. Correction coefficients are derived in terms of moments of the slit function. Application to model LED spectra measured with a compact, fiber‐coupled spectrometer having bandwidth of order 12 nm, and a nonlinear wavelength scale shows that accurate LED color measurements may be obtained with such an instrument. Fitting of the relatively broad slit function to line spectra for accurate wavelength calibration is also described. Such fitting, coupled consistently with the bandpass correction, improves the accuracy color measurements with a broad‐response spectrometer. © 2006 Wiley Periodicals, Inc. Col Res Appl, 31, 374–380, 2006; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/col.20242     

NIST 0:45 reflectometer

The NIST 0:45 reflectometer measures the spectral reflectance factor at an influx angle of 0° and an efflux angle of 45° of colored, nonfluorescent specimens at room temperature, with widths ranging from 3 to 10 cm and heights from 3 to 20 cm and with an uncertainty of less than 0.5 in color difference units. Published in 2008 by John Wiley & Sons, Inc. Col Res Appl, 33, 94–99, 2008     

Uncertainty analysis for the NIST 0:45 Reflectometer

Sets of color tiles are available from the National Institute of Standards and Technology calibrated using the NIST 0:45 Reflectometer. The uncertainties associated with the measured values for the color tiles are an indispensable component of the calibration report that accompanies these tiles. A systematic, analytical approach developed previously was applied to the particular case of the reference instrument and color tile set, taking into account the operation and characteristics of the instrument and the spectral properties of the set. The primary sources of uncertainty were identified, and the resulting uncertainties in the color space values L*, a*, and b* were determined. In general, the uncertainties are lowest for those color tiles whose reflectance factors are nearly constant with wavelength. Published in 2008 by John Wiley & Sons, Inc. Col Res Appl, 33, 100–107, 2008     

BC—1型白平衡仪的原理与实践

ＢＣ－１型白平衡仪是一种光电积分式测色仪器，它通过颜色传感器获取屏幕的红，绿，蓝三条色信号，与预先存储在仪器中的标准信号值相比较通过ＬＥＤ条形显示器显示两者之偏差，用以直接指导彩电生产线的白平衡调整，仪器采用Ｉｎｔｅｌ１８０９８单片微机为系统核心，内藏信号发生器，仪器可任选红，绿，蓝作为基准色，具有基色亮度自动调整功能，该仪器的定标方法简单，快捷，可方便地存储８套基准白场标准数据，该仪器已可靠在应     

Chromatic luminance,colorimetric purity,and optimal aperture‐color stimuli

Chromatic luminance (i.e., luminance of a monochromatic color) is the source of all luminance, since achromatic luminance arises only from mixing colors and their chromatic luminances. The ratio of chromatic luminance to total luminance (i.e., chromatic plus achromatic luminance) is known as colorimetric purity, and its measurement has long been problematic for nonspectral hues. Colorimetric purity (p_c) is a luminance metric in contrast to excitation purity, which is a chromaticity‐diagram metric approximating saturation. The CIE definition of p_c contains a fallacy. CIE defines maximum (1.0) p_c for spectral stimuli as monochromatic (i.e., optimal) stimuli, and as the line between spectrum ends for nonspectrals. However, this line has <0.003 lm/W according to CIE colorimetric data and is therefore effectively invisible. It only represents the limit of theoretically attainable colors, and is of no practical use in color reproduction or color appearance. Required is a locus giving optimal rather than invisible nonspectral stimuli. The problem is partly semantic. CIE wisely adopted the term colorimetric purity, rather than the original spectral luminance purity, to permit an equivalent metric for spectrals and nonspectrals, but the parameter of equivalence was never clear. Since 1 p_c denotes optimal aperture‐color stimuli for spectrals, arguably 1 p_c should denote optimal stimuli consistently for all stimuli. The problem reduces to calculating optimal aperture‐color stimuli (“optimal” in energy efficiency in color‐matching) for nonspectrals, shown to comprise 442 + 613 nm in all CIE illuminants. This remedy merely requires redefinition of 1 p_c for nonspectrals as the line 442–613 nm, and gives meaningful p_c values over the hue cycle allowing new research of chromatic luminance relations with color appearance. © 2007 Wiley Periodicals, Inc. Col Res Appl, 32, 469–476, 2007     

Effects of the International Temperature Scale of 1990 (ITS-90) on CIE Documentary Standards for Radiometry,Photometry, and Colorimetry

The differences between ITS-90 and IPTS-68 above 1235 K are described. It is shown that none of the following CIE definitions or recommendations require revision because of the introduction of the ITS-90: International Lighting Vocabulary definitions; CIE Standard Illuminants A, D₆₅, other illuminants; and sources for realizing CIE Illuminants. The effect of the ITS-90 on previously calibrated sources for realizing CIE illuminants is negligibly small.²     

水泥色度控制方法

总结了国内某水泥企业多年对水泥色度进行控制的实际经验,参照国外资料,分析、对比了水泥色度的各类影响因素,给出这些影响因素影响程度的相对大小。提出了水泥企业色度控制指标的推荐数值。针对顾客最容易提出的水泥色度问题,从效果评价、可操作性、负面影响、实施的优先程度等方面介绍了水泥色度的控制方法。     

烟草浸出液防治菜青虫及对蔬菜品质的影响

用四种不同浓度烟草浸出液防治菜青虫，与40％乐果比较。试验结果表明2倍液防治效果最好。杀虫率平均迭87．5％。以清水为对照。采用问接萃取比色法。做出烟碱的标准工作曲线。喷药24、48、72h后采集样品。测定其残留，4种浓度的残留均未检出。同时进行蔬菜生理指数的测定，结果显示喷药后叶绿素的含量显著增多。维生素C含量变化明显。