Thermal transport and chemical conversion in single reacting sorbent particles

The effects of particle size and carbon dioxide concentration on chemical conversion in engineered spherical particles undergoing calcium oxide looping are investigated. Particles are thermochemically cycled in a furnace under different carbon dioxide concentrations. Changes in composition due to chemical reactions are measured using thermogravimetric analysis. Gas composition at the furnace exit is evaluated with mass spectroscopy. A numerical model of thermal transport phenomena developed previously is adapted to match the physical system investigated in the present study. The model is used to elucidate effects of reacting medium characteristics on particle temperature and reaction extent. Experimental and numerical results show that (1) an increase in particle size results in a decrease in carbonation extent, and (2) the carbonation step consists of fast and slow reaction regimes. The reaction rates in the fast and slow carbonation regimes increase with increasing carbon dioxide concentration. The effect of carbon dioxide concentration and the distinction between the fast and slow regimes become more pronounced with increasing particle size.     

对海水进行混凝除浊预处理研究

介绍采用聚合氯化铁（PFC）为絮凝剂，对海水进行混凝除浊预处理方法。考察了原海水pH、搅拌速度、反应时间及PFC用量对海水预处理效果的影响。结果表明，在原海水pH凋至9．0，搅拌速度控制在200min^-1，反应时间选择8—10min，PFC用量0．10μg／g的最佳条件下，能使处理后的海水浊度降至0．05mol／L，而联产的酸性废水中和剂浆料中Mg（OH）2含量在25％～45％，大肠菌群的去除率大于89．3％。     

集中药包与条形药包爆破漏斗及抛掷堆积研究

把集中药包拉成条形药包之后，其爆破漏斗变化有多大?条形药包能否改善抛掷堆积?可否用集中药包的爆破漏斗参数(n、R、R’、P)及经验方法来设计条形药包的爆破漏斗?本试验研究将回答这些问题。     

Preparation of flexible polyhedral particles via concentrated emulsion templating polymerization

This paper presents recent efforts on the preparation of flexible polyhedral particles via concentrated emulsion templating polymerization in which the hydrophilic monomer (acrylamide) and hydrophobic monomer (butyl acrylate) are polymerized simultaneously in the continuous and dispersed phase, respectively. Such templating polymerization has been enhanced in our systems owing to the introduction of acrylamide monomer and their higher polymerization rate in continuous phase as compared with butyl acrylate in dispersed phase. Diffusion between the different phases was also inhibited. Furthermore, the stability of the concentrated emulsion and the molecular weight of the produced poly(butyl acrylate) were found to be significantly affected by the amount of redox initiator. The morphology of the particles could be controlled by varying the volume fraction of the dispersed phase and the polyhedral particles were achieved at higher volume fraction. Copyright © 2005 Society of Chemical Industry     

Ennoblement of stainless steel in natural seawater – A new explanation

The ennoblement of corrosion potential (E_corr) of passive metal immersed in seawater was investigated with electrochemical technology and epifluorescence microscopy. The in situ observation showed that the bacteria number increased on the metal surface according to an exponential law which was in the same way with the ennoblement of E_corr. At the same time, the anodic polarization current of high‐Mo stainless steel decreased in the initial days. According to the mix‐potential theory and the characteristics of polarization curves of high‐Mo steel in natural seawater, the ennoblement of corrosion potential may be induced by the decrease of the passive current density.     

海水介质中高活性镁合金负极的电化学性能

研制了一种新型镁合金负极材料；用电化学方法测定了镁合金负极在人造海水介质中的电化学性能，用浸泡法测定了材料在人造海水介质中的自腐蚀速度，用扫描电子显微镜观察了镁合金腐蚀后的表面形貌，并与AP65合金和纯镁进行了比较。结果表明，新研制的镁合金在人造海水介质中的开路电位增加，自腐蚀速度降低，稳定工作电位提高，电极表面腐蚀均匀，可开发用于高电性能电池的负极材料。     

利用网络技术实施财务集中控制

针对企业集团分权化管理的缺点，设计出一套利用互联网络技术实现企业集团财务集中控制的模式，给出了模式的图示及说明。     

海水冻融后轻骨料混凝土的双轴压压强度和变形性能

针对我国渤海湾北部海域轻骨料混凝土结构的工作环境和受力状态，进行了海水中不同冻融循环次数后轻骨料混凝土的双轴压压强度试验，考察了试件的破坏形态和表面裂缝的走向特征。根据试验结果，分析了极限抗压强度随冻融循环次数和应力比的变化规律，并在此基础上建立了考虑海水冻融影响的双轴压压强度准则。探讨了冻融循环作用后轻骨料混凝土的双轴压压变形性能，包括峰值应变、应力-应变关系随冻融循环次数和应力比的变化规律。研究结果说明，随冻融循环次数的增加各种应力比下的应力-应变关系曲线均逐渐扁平，峰值应力点明显下降并右移，说明混凝土的极限抗压强度逐渐降低。     

Structural Disruption of Toothpastes Under Deformation — An Easy Release of Active Ingredients

The author suggests a technological approach relevant to the optimization of toothpaste compositions with regard to the easy release of the therapeutic ingredients under shear deformation. It is based on the comparative assessment of the steady‐state viscous behaviour of placebo samples (mixtures containing all the components except the therapeutic ingredients) and the final products. It is presumed that the maximum beneficial effect of the toothpastes, as therapeutic agents, is achieved if the final products and the placebo blends display similar shear‐thinning characteristics.     

Rheological behaviour of concentrated yeast suspension

The effect of yeast cell volumetric concentration on the rheological properties of the suspensions was measured in a pipe-flow viscometer at 30°C: at low microbial concentrations the suspensions were Newtonian; however, non-Newtonian behaviour, which could be described by the power-law equation, was observed with suspensions at high microbial volumetric concentrations. At conditions of constant microbial morphology and growth rate, the results also indicated that a relationship could be developed between the power-law constants and the microbial volumetric concentration.