Methods of Verifying Continuous Automatic Belt Weighers: State and Prospects

The basic methods of verifying continuous automatic belt weighers are described. A comparative analysis of these methods on the basis of experimental studies is made and ways of implementing the results in industry are recommended.     

模拟光耦SLC800在转台系统中的应用

在大功率转台控制系统中．存在着较大的电压干扰和电磁兼容问题。在转台的控制精度和驱动功率不断提高的情况下．本文使用模拟光耦隔离器件SLC800重新设计了转台中的某部分模拟电路．将功率放大电路和控制电路隔开，来增强系统的抗干扰能力和运行的可靠性。实验结果的分析和转台的运行表明：应用模拟光耦进行隔离，有效地消除了转台控制中的干扰和电磁兼容。     

近红外仿灸仪的研制与临床应用

近红外仿灸仪,也称为经络灸疗仪,是采用我国传统医学与现代科学技术相结合而研制成的一种新型中医治疗、保健仪器,可以用于治疗多种疾病。本仪器根据艾灸燃烧时所辐射的光谱,运用仿真技术进行模拟,根除了传统灸法燃烧缓慢、效率不高、烟雾较大、刺鼻熏眼、易于灼伤、操作不便等缺点,充分发挥了我国传统灸法的温经通络、补气活血、化瘀消肿,祛湿止痛的功效。     

HYSIM软件模拟天然气加工工艺流程的研究(Ⅰ)——系统中无循环物流

本文结合大庆油田天然气矿场加工实际生产装置,讨论了应用HYSIM烃类工艺模拟软件对含有不确定组分的体系进行流程模拟计算的特点、塔设备严格模拟计算过程中输入规定的选择、以及多股流换热器和吸附脱水工艺的模拟计算方法。     

Application of a Compaction Simulator to the Design of a High-Dose Tablet Formulation. Part I

The compaction properties of an investigational drug are studied by the use of a compaction simulator. The effects of punch velocity over the range of 30-640 mm^-1 on the compaction properties of the pure drug and a variety of formulas incorporating a high dose of the active compound have been investigated. The data were analyzed by applying the Heckel equation. The pure drug was found to have a high yield pressure at a relatively low punch velocity of 31 mm^-1. As the punch velocity was increased there was a decrease in crushing strength, primarily as a result of increasing yield pressure. These findings indicate that the pure drug predominantly consolidated by fragmentation and elastic deformation, with a slow plastically deforming component. The information obtained on the consolidation mechanism of the pure drug and, subsequently, on model formulas were instrumental in the design and selection of a robust formula and granulation process. The advantages of conducting dosage form design and characterization studies during the early phase of tablet formulation using means such as a compaction simulator are emphasized in this investigation.     

DDS的雷达杂波信号模拟系统的研究

介绍了雷达杂波信号的建模与仿真原理，给出了一个基于直接数字频率合成的雷达杂波信号模拟系统的设计实例，该系统采用丁软硬件相结合形式，能灵活生成包括地杂波、海杂波、云雨杂波、箔条杂波在内的多种信号波形的雷达杂波回波信号。     

The application of microencapsulated phase‐change materials to nylon fabric using direct dual coating method

The fabrication of functional textiles able to provide thermal regulation and comfort for the body has attracted increasing interest in recent years. This research investigated fabric coatings containing energy absorbing, temperature stabilizing, phase‐change material microcapsules (PCMMcs), and their methods of application. Specifically, a coated fabric was directly prepared by a dual‐type coating method, in which the PCMMcs were dispersed in a polyurethane coating solution with no binder. The thermal performances of the dual‐coated samples were evaluated by differential scanning calorimetry, and their physical characteristics were examined by scanning electron microscopy, thermal vision camera, porosity, water vapor transmission rate (WVTR), and water entry pressure (WEP) analyses. Furthermore, the microclimate characteristics of the thermally enhanced fabrics were investigated under experimental conditions using a human‐clothing‐environment (HCE) simulator system. The study results confirmed the superior performance of the dual‐coated fabrics in terms of thermal regulation and body comfort, compared with those coated by the dry or wet coating method, because of the improved WEP, WVTR, and thermal performance. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

过程控制级模拟轧钢系统的研制及在热轧试车中的应用

宝钢集团上海第一钢铁有限公司(后面简称一钢)新建的不锈钢工程1780热轧项目中,为了能在较短周期内完成所有的应用软件开发与测试任务,特别研制了模拟轧钢功能。本论文主要阐述利用计算机的集成思想,结合热轧工艺,来开发模拟轧钢功能,以及利用模拟轧钢进行现场各种情况的模拟测试。     

两相管流工艺计算软件的研制

利用流体力学理论 ,结合目前国内外最新的两相流理论和实验研究成果 ,在描述气液两相流水力计算、热力计算和流型判断的数学物理模型基础上 ,研制出适用于海洋、沙漠、丘陵地区原油与伴生气、凝析天然气与凝液输送工艺的一套新的计算模拟软件TFTCS。介绍TFTCS软件的结构、功能、适用范围。用该软件对锦州 2 0 - 2海底湿天然气管道进行模拟计算 ,并与管线生产数据进行对比 ,用国外同类软件PIPEPHASE进行验算。实例计算分析表明 ,该软件功能完善 ,操作方便 ,计算结果可靠 ,能满足油气混输管道的设计计算和生产管理的需要