The identification of highly chlorinated ethers and diethers in river sediment near an epichlorohydrin plant

In harbour sediment samples taken near an epichlorohydrin production plant, a series of highly chlorinated ethers and diethers were detected viz. three isomeric bis(dichloropropyl)ethers, several structurally closely related ethers with 9 carbon atoms (C₉ ethers), a number of C₁₂ ethers and diethers, and finally several C₁₅ ethers. The formation of this new class of ether compounds can be explained on the basis of the chemistry of the addition of HOCl to allylchloride. After initial addition of Cl⁻, a reactive intermediate is formed which may react with the product dichloropropanol, to give the C₆ ethers, or may polymerize with the starting compound allylchloride followed by reaction with the product, to give the C₉, C₁₂ and C₁₅ ethers.     

环氧氯丙烷下游产品生产现状及市场前景

论述了环氧氯丙烷的主要下游产品环氧树脂、合成甘油、氯醇橡胶等的生产现状、市场前景等,指出:我国氯碱行业应该重视这些环氧氯丙烷下游精细化工产品的开发,以促进我国环氧氯丙烷的发展。     

3-氯-2-羟丙基三甲基氯化铵的制备

通过系统的实验研究,探索出3 氯 2 羟丙基三甲基氯化铵(CHPTMAC)的最佳生产工艺条件:n(环氧氯丙烷)∶n(三甲胺盐酸盐)=0 95∶1,反应起始pH=7 5～8 0,反应温度采用分段控制(10℃,35℃),使用合适的催化剂,反应收率可达96%以上。通过连续水汽精馏对产品进行纯化,纯化后的产品中w(CHPTMAC)=69%,w(环氧氯丙烷)≤0 0005%,w(二氯丙醇)≤0 0015%,产品性能良好,已投入生产。     

硅橡胶合成催化剂氢氧化四甲铵的制备新工艺

采用有效面积为4.5dm~2的全氟阳离子交换膜,在阳极室容积为500mL、阴极室容积为580mL的二室单膜电渗析槽内,以四甲基氯化铵为原料,制备了合成有机硅橡胶及其他有机硅产品聚合用催化剂氢氧化四甲铵(Me_4NOH)。阳极室四甲基氯化铵浓度为30％(质量),阴极室可得到纯度为 13％-15％、Cl~-<0.01％、Na~+<0.0001％和 K~+<0.000 5％的 Me_4NOH。产品经减压浓缩即得到 Me_4NOH·5H_2O晶体。     

汽车用橡胶制品的发展

介绍了橡胶制品应用于汽车中的现状，统计了各种汽车中的橡胶用量、汽车橡胶制品使用的胶种及比例、世界汽车年产量，橡胶消耗量，轮胎生产量及世界前30名橡胶制品企业销售额。对汽车用橡胶制品的特点及发展趋势作了较系统的介绍。     

Preparation and characterization of TiO2 and polymer nanocomposite films with high refractive index

Novel nanocomposite films of TiO₂ nanoparticles and hydrophobic polymers having polar groups, poly (bisphenol‐A and epichlorohydrin) or copolymer of styrene and maleic anhydride, with high refractive indices, high transparency, no color, solvent‐resistance, good thermal stability, and mechanical properties were prepared by incorporating surface‐modified TiO₂ nanoparticles into polymer matrices. In the process of preparing colloidal solution of TiO₂ nanoparticles, severe aggregation of particles can be reduced by surface modification using carboxylic acids and long‐chain alkyl amines. These TiO₂ nanoparticles dispersed in solvents were found not to aggregate after mixing with polymer solutions. Transparent colorless free‐standing films were obtained by drying a mixture of TiO₂ nanoparticles colloidal solution and polymer solutions in vacuum. Transmission electronic microscopic studies of the films suggest that the TiO₂ nanoparticles of 3–6 nm in diameter were dispersed in polymer matrices while maintaining their original size. Thermogravimetric analysis results indicate that the nanocomposite film has good thermal stability and the weight fraction of observed TiO₂ nanoparticles in the film is in good accordance with that of theoretical calculations. The refractive index of nanocomposite films of TiO₂ and poly(bisphenol‐A and epichlorohydrin) was in the range of 1.58–1.81 at 589 nm, which linearly increased with the content of TiO₂ nanoparticles from 0 to 80 wt %. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

国内外环氧氯丙烷市场分析

目前 ,世界上环氧氯丙烷的总生产能力约为 12 2万t/a,产量约为 92万t;我国环氧氯丙烷的生产能力约为 11万t/a ,产量约为 9万t,2 0 0 3年的总消费量约为 15 9万t。预计 2 0 0 5年我国环氧氯丙烷的需求量将达到2 2 1万t,产品将严重供不应求。     

环氧氯丙烷生产技术及市场消费

论述了环氧氯丙烷2种生产工艺特点及其市场消费，并对环氧氯丙烷的市场前景进行展望。     

活性中间体失水甘油基三甲基氯化铵的性质研究

以环氧氯丙烷和三甲胺为原料 ,常温下合成活性中间体失水甘油基三甲基氯化铵 (GTA)。通过对GTA的吸水性和水解性的定量分析可知 :温度上升水解加快 ,吸水减慢 ;吸水与水解都随时间延长加强。在较低浓度的GTA水溶液中 ,随时间的延长GTA逐渐水解失效 ,但质量分数为 70 %～ 80 %的GTA稠浆的分解速率常数却很小。     

Preparation and protein adsorption of hydrogel polysucrose microspheres

A series of novel hydrogel polysucrose microspheres with the mean size ranging from 200 to 500 μm were prepared via two‐step method. First, soluble polysucrose was synthesized by solution polymerization between sucrose and epichlorohydrin; second, a reversed phase suspension crosslinking reaction was performed to prepare polysucrose microspheres. The SEM images indicated that these spherical beads had smooth surface and hydrogel interior structure. FTIR was used to characterize the chemical structure of the beads. The hydrated and dry densities, equilibrium water content, and hydroxyl content of polysucrose microspheres were also investigated. The characteristic of high hydroxyl content (15.48–19.04 mmol/g) make these microspheres suitable for protein adsorption. Meanwhile, bovine serum albumin was used to examine the adsorption capacity of the microspheres. These microspheres had a capacity as high as 49.28 mg/g. The adsorption kinetics and recycling of the beads were also investigated. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 5934–5940, 2006