Effects of zirconium silicate and chromite addition on the microstructure and bulk density of magnesia–magnesium aluminate spinel-based refractory materials

Six synthesized magnesium aluminate spinel-based refractory compositions used in steel and cement applications, were prepared using a two stage sintering process at 1760 °C, starting with approximately 1:1 wt% ratio of pure magnesia and alumina with additions of zirconium silicate (0.5, 1.0 and 2.0 wt%) and chromite (2.0, 3.0 and 5.0 wt%). These compositions were investigated for effects on densification, chemical and mineralogical phases formed.     

硼酸使掺铁铝酸锂发光增强的现象

在硼酸存在下合成了掺铁铝酸锂荧光体,研究了在不同温度下硼酸加入量对荧光体发光强度的影响,并通过X射线粉末衍射和粒度分析,初步探讨了发光增加的原因。     

Partial Oxidation of Methane to Syngas over Calcined Ni–Mg/Al Layered Double Hydroxides

The catalytic partial oxidation of CH₄ to syngas was carried out over an Ni–Mg/Al mixed-oxide catalyst prepared from layered double hydroxide-type precursors. The catalysts were characterized by XRD, TPR, UV-DRS, XRF, BET and CHNS analysis. The effects of the catalyst composition and the calcination temperature on the catalytic performance and the extent of catalyst deactivation were investigated. Ni–Mg/Al oxide catalysts converted CH₄ into syngas efficiently with high selectivity. The catalyst performance was strongly related to the Ni particle size and the calcination temperature. The catalysts that were calcined at higher temperature exhibited a better catalytic performance. In conclusion, the NiAl₂O₄ spinel phase had a positive effect on the stability of the catalyst.     

铝酸钠溶液分解反应研究

为了研究氧化铝生产过程中铝酸钠溶液的分解反应动力学方程及反应器的优化操作设计, 首先用络合滴定法测定了氧化铝在氢氧化钠溶液中在50~65℃范围内的溶解度, 它为研究动力学提供了基础数据, 并得出溶解度方程为: Tc/4.221857.10ln-=* 在温度精度控制在±0.1℃的间歇釜式玻璃反应器中,在温度为50~60℃、氧化钠浓度为110gL-1和起始铝酸钠浓度为1.92molL-1的条件下,进行了65~84h的铝酸钠溶液的分解反应动力学实验。通过关联实验结果确定了反应动力学方程为: ()2312)/)((/10043.83exp101664.1**--=-cccARTrttA 该方程计算值与实验值的相对误差≤5%。 将溶解度方程与动力学方程进一步应用于反应器的优化操作设计,计算表明:采用动力学方程提供的铝酸钠最优操作过程,铝酸钠的分解率能提高4%左右。     

Molar volume and ultrasonic studies of europium soaps in mixed organic solvents

The ultrasonic velocity and density measurements of europium soaps in a mixture of benzene and methanol (3:2, vol/vol) were used to evaluate various acoustic parameters and molar volume and to determine the critical micelle concentration. The results showed that the ultrasonic velocity, specific acoustic impedance, molar sound velocity, and molar compressibility increase, and intermolecular free length, adiabatic Compressibility, and relative association decrease with increasing concentration and chainlength of the soap. The results were interpreted in terms of soap-solvent interaction.     

铝酸钆基体发光薄膜组合芯片制备及其发光性能

组合材料芯片技术是功能材料开发研究的全新方法，能够高效、快速地筛选／优化新材料。采用这一技术快速发现／优化新型铝酸钆系发光材料(Gd1-xAlyOx：Rex)，并通过柠檬酸-硝酸盐燃烧法制备的相同粉体的实验结果，考察了材料芯片筛选结果的可靠性。对发光体在波长为254DE的紫外光激发下进行实验，获得如下的研究结果：铝酸钆基体晶相中n(Gd)：n(A1)的最佳比值为1：1和3：5。GdAlO3中的最佳激活剂(主要是Eu，Pr和Ce)Eu，且Gd1-xAlO3：Eux的主发射峰位置为615nm和593nm。Gd1-xAlO3：Eux中的最佳掺量x值为0．09。     

新型铝酸酯光稳定剂的研究

合成了五种新型铝酸酯光稳定剂并对其紫外吸收性能、荧光性能和热稳定性能进行了表征，探讨了光稳定剂结构、相对分子质量与其性能的关系，并验证它们的光稳定性及其在PE—LD中的光氧化稳定作用。还与紫外线吸收剂BAD和Tinuvin327进行了应用比较。     

The influence of an intermediate MoO3 layer on the solid state reaction of cobalt oxide withγ-Al2O3

In view of the importance for Co_xO_y,-MoO₃/-Al₂O₃ hydrodesulphurization (HDS) catalysts, the reactivity of cobalt oxide layers towards cobalt aluminate formation was investigated on both MoO₃-covered and bare -Al₂O₃ substrates. Co₃O₄/MoO₃/-Al₂O₃ and Co₃O₄/-Al₂O₃ systems were prepared by vapour-deposition of MoO₃ (12 × 10¹⁵ Mo atoms/cm²) and Co (400 × 10¹⁵ Co atoms/cm²) layers onto a -Al₂O₃ substrate, followed by oxidation of the Co layer to Co₃O₄. After annealing at 800°C for 40 h, the interfacial reaction to cobalt aluminate was assessed using Rutherford backscattering spectrometry. The presence of molybdenum oxide appeared to enhance cobalt aluminate formation. The Mo atoms, which spread out over the entire cobalt-containing layer, presumably caused a high defect density, which explains the observed higher reaction rate. The amount of MoO₃ was much too low to stabilize all cobalt atoms by cobalt molybdate formation.     

中等浓度含硅铝酸钠溶液深度脱硅过程物理化学性质的研究

通过对脱硅过程中含硅铝酸钠溶液表面张力和黏度的测定,研究脱硅温度、氧化铝浓度、苛性比等因素对溶液的表面张力和黏度的影响.实验结果表明：低温、高浓度、高苛性比的溶液表面张力和黏度较大,反之则较小.通过XRD检测手段对脱硅后的渣相进行分析,用衍射峰与结构的关系解释溶液的表面张力和黏度的变化对硅量指数的影响.     

掺铕铌酸锂晶体的M■ssbauer谱

测量了Ｅｕ：ＬｉＮｂＯ_３和（Ｅｕ，Ｍｇ）：ＬｉＮｂＯ_３的Ｍｓｓｂａｕｅｒ谱，并对数据进行了拟合。根据拟合结果和ＬｉＮｂＯ_３晶体结构的特征，讨论了Ｅｕ~（３＋）在晶格中的占位，并以Ｅｕ~（３＋）的参数为探针．讨论了Ｍｇ（２＋）在晶格中的占位。