Effects of interphase on tensile strength of polymer/CNT nanocomposites by Kelly–Tyson theory

The micromechanics models for composites usually underpredict the tensile strength of polymer nanocomposites. This paper establishes a simple model based on Kelly–Tyson theory for tensile strength of polymer/CNT nanocomposites assuming the effect of interphase between polymer and CNT. In addition, Pukanszky model is joined with the suggested model to calculate the interfacial shear strength (τ), interphase strength (σ_i) and critical length of CNT (L_c).The proposed approach is applied to calculate τ, σ_i and L_c for various samples from recent literature. It is revealed that the experimental data are well fitted to calculations by new model which confirm the important effect of interphase on the properties of nanocomposites. Moreover, the derived equations demonstrate that dissimilar correlations are found between τ and B (from Pukanszky model) as well as L_c and B. It is shown that a large B value obtained by strong interfacial adhesion between polymer and CNT is adequate to reduce L_c in polymer/CNT nanocomposites.     

Synthesis,characterization and properties of functionalized styrene–maleimide copolymers

New functionalized styrene–maleimide copolymers were prepared by free radical copolymerization of styrene (St) and N‐4‐carboxybutylmaleimide (NBMI) in chloroform, using 2,2′‐azobisisobutyronitrile (AIBN) as initiator. Monomer and copolymer characterization was carried out by ¹H‐ and ¹³C‐NMR. Copolymer composition was determined by elemental analysis and Fourier‐transform infrared (FTIR) spectroscopy. The glass transition temperature (from DSC) and the thermogravimetric analysis (TGA) of the copolymers were consistent with the thermal behavior and stability observed for alternating St–maleimide copolymers. St–NBMI copolymers crosslinked with divinylbenzene (DVB) were also synthesized and their cation exchange properties evaluated in order to assess the capacity of the new copolymers to bind metallic ions. Copyright © 2005 Society of Chemical Industry     

新的载体媒介传递膜

总结了近几年研究和发展的几种载体媒介传递膜。与支撑液膜相比，这些膜具有好的稳定性和长的寿命。对某些物质，如重金属离子、小分子中性碳氢化合物、氨基酸等有高的选择性和通量。它们的传递机理为固定位置跳跃或移动和固定载体2种机理结合。这些研究有望在环境、生物等技术领域中应用。     

Ionic liquids as electrolytes

Salts having a low melting point are liquid at room temperature, or even below, and form a new class of liquids usually called room temperature ionic liquids (RTIL). Information about RTILs can be found in the literature with such key words as: room temperature molten salt, low-temperature molten salt, ambient-temperature molten salt, liquid organic salt or simply ionic liquid. Their physicochemical properties are the same as high temperature ionic liquids, but the practical aspects of their maintenance or handling are different enough to merit a distinction. The class of ionic liquids, based on tetraalkylammonium cation and chloroaluminate anion, has been extensively studied since late 1970s of the XX century, following the works of Osteryoung. Systematic research on the application of chloroaluminate ionic liquids as solvents was performed in 1980s. However, ionic liquids based on aluminium halides are moisture sensitive. During the last decade an increasing number of new ionic liquids have been prepared and used as solvents. The general aim of this paper was to review the physical and chemical properties of RTILs from the point of view of their possible application as electrolytes in electrochemical processes and devices. The following points are discussed: melting and freezing, conductivity, viscosity, temperature dependence of conductivity, transport and transference numbers, electrochemical stability, possible application in aluminium electroplating, lithium batteries and in electrochemical capacitors.     

Interfacial interaction in AI(OH)3/polypropylene composites modified by insitu‐functionalized polypropylene

To investigate the interfacial interaction of AI(OH)₃/polypropylene (PP) composites modified by in situ‐functionalized polypropylene (FPP), AI(OH)₃/polypropylene (PP) composites containing a low AI(OH)₃ content, modified by in situ‐grafted acrylic acid, were prepared by a one‐step melt‐extrusion process. The effect of in situ FPP on the crystallization and melting behavior, crystalline morphology of the composites, and interfacial interaction between the filler and PP was investigated. The crystallization and melting behavior and crystalline morphology of PP in the composites depended upon the interfacial physical [heterogeneous nucleation of AI(OH)₃; cocrystallization and compabilitization of PP with in situ FPP] and the interfacial chemical interaction between both the components in the composites. FTIR results indicated that there exists a chemical reaction between AI(OH)₃ and in situ FPP. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 110–120, 2002; DOI 10.1002/app.10270     

拉压变形对B(N)掺杂碳纳米管Al吸附性能的影响

为了研究(5,5)碳纳米管的B(N)环状掺杂效应,以及拉压变形对B(N)环状掺杂碳纳米管Al吸附性能的影响,采用基于密度泛函理论的平面波赝势和广义梯度近似方法,对B(N)环状掺杂碳纳米管Al吸附模型进行了几何优化,计算了B(N)环状掺杂碳纳米管的形成能,并确定了Al原子的最稳定吸附位置.结果表明,B(N)环状掺杂(5,5)碳纳米管的结构较为稳定.B(N)环状掺杂可以增加碳纳米管与Al之间的吸附能;一定范围内的拉伸和压缩变形则会降低碳纳米管与Al之间的大部分吸附能.     

基于纳米材料的电化学生物传感器研究进展

该文主要从纳米尺寸材料电极的构建以及纳米材料作为生物分子指示剂两部分展开讨论,描述了依赖于阵列纳米管排列的生物分子与电极间的直接电子传递,纳米管、纳米颗粒为基质的纳米电极的构建,以及以金纳米颗粒、DNA量子点和蛋白为基础的多路分析技术与负载于CNT的新的纳米生物标记,特别讨论了纳米电化学方法在检测DNA和免疫传感器领域取得的研究进展.     

Fabrication of patterned single-walled carbon nanotube films using electrophoretic deposition

Thin films of chemically functionalized single-walled carbon nanotubes (SWNTs) were fabricated by using a direct current (dc) electrophoretic deposition method. SWNTs were shortened and then functionalized with acid chloride group to combine with the amine group-terminated gold substrate. Silica nanospheres with a diameter of about 190nm were arrayed on gold substrate to pattern a thin SWNT film. Periodically patterned SWNT film was eventually produced and would be used in potential applications like electron emitters and large surface area electrodes.     

Preparation,characterization, and properties of disulfide-containing polyethyleneimine grafted carbon nanotubes

Novel functionalized carbon nanotubes (CNTs) were prepared by grafting disulfide-containing polyethyleneimine (SSPEI) to CNTs. The SSPEI were synthesized by Michael addition between cystamine bisacrylamide and low molecular weight branched 1.8 kDa PEI. Three SSPEI grafted carbon nanotubes (CNTs-SSPEI) were successfully prepared through grafting SSPEI to CNTs. The grafted ratios were 32.26%, 43.11%, and 51.50%, respectively. Moreover, the grafted ratio could be tuned by adjusting the CNTs/SSPEI ratio during the process of preparation. The CNTs-SSPEI was characterized using Fourier transform infrared spectroscopy, scanning electron microscopy and thermogravimetric analysis. The CNTs-SSPEI showed better dispersability and stability in water than CNTs. In addition, the SSPEI on the surface of CNTs-SSPEI could be degraded in the presence of dithiothreitol.     

Improvement in mechanical properties of recycled GF prepreg with CNT reinforced composites using a spray coating method

Dispersion and shape of nanoparticles, as well as interfacial conditions, add significantly to difficulties in composite manufacture. In the work reported here, an innovative method of recycling composites using out-of-date prepreg was investigated in which the carbon nanotube (CNT) on the prepreg was optimally coated. Nanocomposites utilizing the out-of-date prepreg were coated with CNT and fabricated by a sheet molding method. CNT nanofillers were observed to be uniformly dispersed on epoxy prepreg by spray coating. The mechanical and interfacial properties of these CNT coated nanocomposites were improved over those of more conventionally manufactured carbon fiber/epoxy composites. The CNT nanofillers were embedded at the epoxy and fiber interface, as a result of etching of the epoxy prepreg surface by a CNT dispersion solution which enhanced interfacial reactivity.