低温高速离心泵的研制与应用

阐述了适合于输送低温介质的高速离心泵的水力设计和结构设计方法，结构上采有长，中，短叶片相间的复合叶轮及双密封结构，理论上采用以效率为目标函数的优化水力设计方法，保证了低温高速离心泵具有很好的工人可靠性和优越的性能指标。     

济钢转炉煤气储存加压系统存在缺陷及处理措施

济钢燃气厂针对济钢转炉煤气储存加压系统的设备现状，组织了一次设备大修，大修后煤气柜升降速度提高到了1．0m/min，并解决了加压机前负压等问题。     

氯气泵叶轮连续破碎原因

针对YLJ型液环式氯气泵叶轮在短期内频繁破碎的情况,对其破碎原因进行了分析,并提出相应的改进措施,使烧碱工艺系统保持了长、满、安、稳的运行状态。     

空压机叶片腐蚀分析

空压机第三级叶轮的叶片严重腐蚀，经光谱、能谱及X射线分析，结果表明光叶腐蚀是因进入空压机的空气中含有大量SO2有害气体和第二级中间冷却器放水器排水不正常，使第三级叶片处于含硫的酸性气氛中而引起的。     

脉冲进气旋转喷吹技术的水力模拟

在铝合金熔体净化旋转喷吹技术的基础上 ,采用水力模拟实验研究了脉冲进气方式对气泡大小的影响。实验结果表明 :脉冲进气方式有利于产生射流 ,使气泡变小 ,并增加了气泡与熔体接触的比表面积 ,从而改善了除氢的动力学条件 ,有利于提高除氢效果。     

IMPROVEMENTS IN GAS INDUCING IMPELLER DESIGN

Rate of gas induction, static pressure, mixing time and power consumption have been measured in 0.57 m i.d. vessel. Different types of impellers namely shrouded disc turbine, shrouded curved blade turbine and pitched blade turbine were used. The impeller diameter was varied from 0.15-0.25 m and the impeller speed was varied from 3 to 20 r/s.

The pitched blade turbine was found to give 30-60 per cent higher rates of gas induction as compared with the best design reported in the literature. The mixing time was found to be lower by a similar magnitude. Moreover in the case of pitched blade turbine it was found that the gas was getting induced radially as well as axially. This eliminates the necessity of the diffuser and hence reducing the complexities in the mechanical structure.     

The prediction of transport parameters in filamentous fermentation broths based on results obtained in pseudoplastic polymer solutions

Transport phenomena studies on single phase “model” fluids are of limited value in biochemical engineering if they cannot be translated to the heterogeneous systems encountered in real fermentation processes. In this paper we discuss the utility of polymer solutions as models of filamentous fermentation broths for evaluation of: pipeline friction factors and impeller power numbers (turbine and helical ribbon). To a first approximation, polymer solutions can serve as suitable models for the prediction of laminar flow pressure drop in pipelines and turbulent power consumption in stirred tanks. However, results obtained on polymer solutions do not directly apply to filamentous fermentation broths for predictions of laminar flow impeller power consumption and the transition point for turbulent flow in stirred tanks. These discrepancies are believed to result from the existence of a time dependent yield stress in filamentous fermentation broths.     

一次风机节能改造

为解决一次风机出口风压低、火焰无力度、系统功耗高等问题,采用空气悬浮风机对其进行节能改造。拆除原有的一次风机备用风机,在原有底座上安装空气悬浮风机,整体设计安装悬浮风机出口管道。改造后,一次风机出口风压明显增大,煤粉燃烧充分,火焰调整灵活,每小时可节电30kWh,两处对空排放管道加装消声器,降噪效果显著。     

一次多级离心泵运行故障处理及分析

简要介绍了实际生产中多级离心泵存在的问题,并分析了故障原因和处理措施。     

一种用于气液间传质的新型轴流式叶轮

一种用于气液间传质的新型轴流式叶轮黄庆民林齐浩李启恩（华南理工大学化学工程研究所，广州５１０６４１）关键词气液传质轴流式叶轮１前言在液体搅拌器中，轴流式叶轮由于功耗较小且泵吸量较大而被广泛采用。在气液两相搅拌器中，由于轴流式叶轮有气泛问题，一般均采...