砂岩酸化中水化硅沉淀的影响因素分析

讨论了砂岩酸化中产生水化硅沉淀的反应机理。使高岭土与1.0%HF和多种配比的HCl HF在不同温度(20-90℃)反应不同时间(10-300分钟),用等离子吸收光谱法(ICP)测定酸液中可溶性硅的浓度(mg/L),取某时段测定值的减小量为该时段水化硅沉淀生成量,讨论了多种因素的影响,得到了如下结果和结论。反应温度越高,则高岭土与HF之间的反应越快,形成水化硅沉淀的时间越短,最终生成的沉淀量越大;在HF中加入HCl(使用土酸体系)、减小土酸中HF质量分数、加大土酸中HCl、HF质量分数比,均可使生成沉淀时间延后,使最终生成沉淀量减少。60℃时300分钟沉淀量,在1.0%HF、5.0%HCl 1.0%HF、9.0%HCl 1.0%HF中分别为482、321、201mg/L。提出了在酸化设计与施工中可以采取的6条简便易行的减少水化硅沉淀量的措施。图4表1参6。     

一种制备插层和无定形高岭土的新方法

利用甲醇钠强烈的夺氢作用 ,介绍了一种制备插层和无定形高岭土的方法。利用XRD为主要检测手段研究了甲醇钠的质量分数、反应温度等因素对反应的影响。结果表明 :在反应温度较低、质量分数较低的甲醇钠溶液中 ,高岭土容易被插层而膨胀 ,反之高岭土的层状结构被破坏而无定形化。红外光谱分析进一步证明了插层和无定形高岭土结构的变化     

Flammability and thermal stability studies of ABS/Montmorillonite nanocomposite

Acrylonitrile–butadiene–styrene (ABS)/montmorillonite nanocomposites have been prepared using a direct melt intercalation technique by blending ABS and organophilic clay of two different particle sizes: OMTa (5 µm) and OMTb (38 µm). Their structure and flammability properties were characterized by X‐ray diffraction, high resolution electronic microscopy (HREM), thermogravimetric analysis (TGA) and cone calorimeter experiments. The results of HREM showed that ABS/5 wt% OMTa nanocomposite was a kind of intercalated–delaminated structure, while ABS/5 wt% OMTb nanocomposite was mainly an intercalated structure. The nanocomposites showed a lower heat release rate peak and higher thermal stability than the original ABS by TGA and cone calorimeter experiments. Also, the intercalated nanocomposite was more effective than an exfoliated–intercalated nanocomposite in fire retardancy. Copyright © 2003 Society of Chemical Industry     

Dispersion—flocculation studies on a Goethite-clay system

Dispersion–flocculation studies on a Goethite–clay system using flocculants were carried out as a function of flocculant concentrations, pH of slurry, time of agitation and dispersant dosage. Also, the effects of pH and polymer concentrations on the adsorption behaviour of the system were investigated. Results show that well flocculated goethite was preferentially obtained from 4% goethite/kaolinite clay suspensions, with 50 ppm causticised starch in the slurry at pH values of 3–11·5 and with 50 ppm polyacrylamide at pH values of 3–8. Good flocs were also obtained on flocculation of the goethite suspension with 50 ppm polyacrylamide at pH values of 5–7, while the kaolinite suspension did not respond to the same dosage of causticised starch in the same pH range. Results further reveal that for the goethite/kaolinite suspension, the best results was obtained with 50 ppm polyacrylamide at pH values of 7–10. Based on the data generated in the study, it was concluded that causticised starch is a better flocculant than polyacrylamide for goethite suspensions although polyacrylamide is an excellent flocculant for kaolinite suspensions.     

New nanocomposite materials based on polymerization of [oligo(oxyethylene) methacrylates] in the presence of montmorillonite clay

Intercalation of poly[oligo(oxyethylene) methacrylates] onto sodium montmorillonite (MMT) clay has been investigated. A polymer–clay hybrid has been synthesized through intercalation of the monomer followed by its solution free‐radical polymerization. Eight polymer–clay hybrids were prepared using different weight ratios of clay, different oligo(oxyethylene) lengths and different proportions of crosslinker. Evidence of the development of nanostructures is obtained from scanning electron microscopy, and wide‐angle X‐ray diffraction studies support these results which show disappearance of the peak characteristic to d₀₀₁ spacing. In this hybrid MMT is dispersed homogeneously in the polymer matrix. © 2003 Society of Chemical Industry     

高岭土改性聚酯纤维

介绍了高岭土在改性聚酯中的作用、纤维级高岭土的性质以及改性聚酯的制造方法．指出了我国开发高岭土改性聚酯纤维的的前景．     

Influence of organophilic clay and preparation methods on EVA/montmorillonite nanocomposites

Ethylene‐vinyl acetate copolymer (EVA)/montmorillonite MMT nanocomposites have been prepared by using different methods: one is from the organophilic montmorillonite (OMT) and the other is from the pristine MMT and reactive compatibilizer hexadecyl trimethyl ammonium bromide (C16). In this study, different kneaders were used (twin‐screw extruder and twin‐roll mill) to prepare nanocomposites. The nanocomposite structures are evidenced by the X‐ray diffraction (XRD) and high‐resolution electronic microscope (HREM). The thermal properties of the nanocomposites were investigated by thermogravimetric analysis (TGA). Moreover, the tensile tests were carried out with a Universal testing machine DCS‐5000. It is shown that different methods and organophilic montmorillonite have influence on EVA/MMT nanocomposites.© 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 2416–2421, 2004     

EVOH／有机蒙脱土插层复合材料的制备与表征

将经有机化处理过的蒙脱土与EVOH熔融共混制备插层复合材料，并对该复合材料进行了XRD分析，分析结果表明：聚合物基体已经插入了有机蒙脱土片层间；复合体系中蒙脱土含量越小，蒙脱土被插开的片层间距越大；当复合体系中有机蒙脱土含量≤8％时，形成剥离型复合材料；当有机蒙脱土含量在8％～15％时，形成插层型复合材料；当有机蒙脱土含量大于15％时，复合材料中蒙脱土片层间距无明显变化。对EVOH与蒙脱土熔融共混过程的扭矩分析表明：该复合材料熔融混合9min之后，达到均匀混合和完全塑化的状态。     

A novel depressor useful for flotation separation of diaspore and kaolinite

The floatation of the minerals diaspore and kaolinite was investigated using dodecylamine as the collector.Separating diaspore and kaolinite in a neutral pH pulp is difficult since they then have similar floatability.A depressor consisting of an AlCl3/Na2SiO3 mixture is demonstrated to solve this problem.Diaspore sinking may be seen when the ratio of AlCl3 to Na2SiO3 is 3.1.We refer to this mixture as ATNO.The influence of Al/Si ratio in the feedstock and the grain size of fed minerals on separation was examined.An Al/Si ratio in the concentrate greater than 11 may be obtained when the Al/Si ratio of the feed is between 2.53 and 4.96.However,the grain size of the diaspore greatly influences the concentrate grade.Finer grain size of the diaspore (＜40 μm)in pulp makes the flotation separation less than ideal,no matter what the kaolinite grain size.     

高岭石声化学插层的XRD研究

以乙二醇、二甲基甲酰胺、二甲基亚砜及双氧水/冰醋酸等为插层剂,采用声化学法对高岭石进行了插层研究,考察了插层剂种类对高岭石插层率的影响.在此基础上,重点研究了以二甲基亚砜作为插层剂的情况下超声波功率、插层时间及插层剂的质量分数等工艺因素对插层率的影响,并采用XRD分析方法测试了高岭石的插层效率.结果表明：二甲基亚砜作为插层剂时插层率最高,插层率可达100%,二甲基甲酰胺和乙二醇次之,双氧水/冰醋酸插层率最低,插层率仅为14.9%.以二甲基亚砜为插层剂时,随着超声功率的增大,插层率先升高后降低;随着插层时间的延长,插层率呈增长趋势,而二甲基亚砜的质量分数对插层率的影响不大.在二甲基亚砜质量分数为75%、超声功率为300W、插层时间为2h的条件下,插层率达到100%,高岭石层间距从0.71nm被有效增大到1.10nm.