High-Performance Solution-Processed Nondoped Circularly Polarized OLEDs with Chiral Triptycene Scaffold-Based TADF Emitters Realizing Over 20% External Quantum Efficiency

Recently, circularly polarized organic light-emitting diodes (CP-OLEDs) fabricated with thermally activated delayed fluorescence (TADF) emitters are developed rapidly. However, most devices are fabricated by vacuum deposition technology, and developing efficient solution-processed CP-OLEDs, especially nondoped devices, is still a challenge. Herein, a pair of triptycene-based enantiomers, (S,S)-/(R,R)-TpAc-TRZ, are synthesized. The novel chiral triptycene scaffold of enantiomers avoids their intermolecular π–π stacking, which is conducive to their aggregation-induced emission characteristics and high photoluminescence quantum yield of 85% in the solid state. Moreover, the triptycene-based enantiomers exhibit efficient TADF activities with a small singlet-triplet energy gap (ΔE_ST) of 0.03 eV and delayed fluorescence lifetime of 1.1 µs, as well as intense circularly polarized luminescence with dissymmetry factors (|g_PL|) of about 1.9 × 10⁻³. The solution-processed nondoped CP-OLEDs based on (S,S)-/(R,R)-TpAc-TRZ not only display obvious circularly polarized electroluminescence signals with g_EL values of +1.5 × 10⁻³ and −2.0 × 10⁻³, respectively, but also achieve high efficiencies with external quantum, current, and power efficiency up to 25.5%, 88.6 cd A⁻¹, and 95.9 lm W⁻¹, respectively.     

An ideal host-guest system to accomplish high-performance greenish yellow and hybrid white organic light-emitting diodes

Greenish yellow organic light-emitting diodes (GYOLEDs) have steadily attracted researcher's attention since they are important to our life. However, their performance significantly lags behind compared with the three primary colors based OLEDs. Herein, for the first time, an ideal host-guest system has been demonstrated to accomplish high-performance phosphorescent GYOLEDs, where the guest concentration is as low as 2%. The GYOLED exhibits a forward-viewing power efficiency of 57.0 lm/W at 1000 cd/m², which is the highest among GYOLEDs. Besides, extremely low efficiency roll-off and voltages are achieved. The origin of the high performance is unveiled and it is found that the combined mechanisms of host-guest energy transfer and direct exciton formation on the guest are effective to furnish the greenish yellow emission. Then, by dint of this ideal host-guest system, a simplified but high-performance hybrid white OLED (WOLED) has been developed. The WOLED can exhibit an ultrahigh color rendering index (CRI) of 92, a maximum total efficiency of 27.5 lm/W and a low turn-on voltage of 2.5 V (1 cd/m²), unlocking a novel avenue to simultaneously achieve simplified structure, ultrahigh CRI (>90), high efficiency and low voltage.     

双层有机电致发光器件有机层厚度优化的数值研究

在陷阱电荷限制电流传导理论的基础上,提出了双层有机电致发光器件的数值模型,研究了结构为"阳极/空穴输运层(HTL)/发光层(EML)/阴极"的器件中电流密度和量子效率随有机层的特征陷阱能量、陷阱密度和载流子迁移率的依赖关系. 研究发现,对于给定的HTL和EML的特征陷阱能量、陷阱密度和载流子迁移率,存在一个最优的HTL和EML之间的厚度比率,在此最优厚度比下,器件的电流密度和量子效率达到最大.通过有机层厚度的优化,器件的电流密度和量子效率可提高多达两个数量级.另外,还研究了最优厚度比随有机层特征陷阱能量、总陷阱密度和载流子迁移率之间的定量关系.     

卟啉类光电功能材料的研究进展

卟啉及其衍生物是一类具有优良的光电性能的有机半导体材料．引起人们广泛的关注。本文对卟啉类光电材料在模拟生物光合作用中心的光致电荷转移和能量转移，有机太阳能电池．分子光电器件。有机电致发光和光存储等领域的研究进展做一简要介绍。     

不同表面预处理对有机电致发光显示器性能的影响

从生产角度研究了基板表面的预处理工艺对OLED性能的影响,分别用UVOzone、氧Plasma以及两者相结合的方式对基板进行表面处理,并按照生产工艺制作器件,从接触角、方阻以及光电特性等测试结果对各种表面处理的样品进行比较。结果表明以上处理都改善了器件性能,不同程度提高了器件的清洁度、亮度和发光效率,其中UVOzone和氧Plasma结合的方式处理效果最为显著,器件在10V时亮度达到79920cd/m2,比其他两种处理方式亮度提高约25%。     

可见光共振腔发光二极管的研究进展

共振腔发光二极管是一种具有优良发光性能的光电器件。概述了对可见光共振腔发光二极管的共振腔结构、反射镜材料体系、基本工作机理和发光特性，并展望了这种器件的发展前景。     

Improvement of emission efficiency in polymer light-emitting devices based on phosphorescent polymers

We report improvement of emission efficiency in polymer light-emitting devices (PLEDs) employing phosphorescent polymers. A hole-blocking layer was inserted between the emissive layer and the cathode to enhance recombination efficiency for the injected holes and electrons. Aluminum(III)bis(2-methyl-8-quinolinato)4-phenylphenolato (BAlq) was used for the hole-blocking layer. The resultant PLEDs exhibited significant improvement of emission efficiency. The respective external quantum efficiencies for red, green and blue PLEDs were 6.6, 11 and 6.9%. These values are very high compared with those based on conventional fluorescent polymers.     

有机发光材料中间体1-羟基芘的合成工艺研究

1-羟基芘是一种重要的有机电致光材料中间体,该中间体能与一些芳烃及其衍生物进一步反应得到不同性质的光电材料,具有广阔的市场前景。为获得1-羟基芘,本文以芘为原料,在二氯甲烷溶液中,在三氯化铝的催化下与乙酰氯反应得到1-乙酰芘;然后与间氯苯过甲酸或过氧硼酸发生bayer-villiger反应,得到1-乙酰氧基芘;接着在甲醇和四氢呋喃混合溶液中水解得到1-羟基芘,该合成路线短,原料易得,适应工业化生产,经1HNMR光谱鉴定,产物与1-羟基芘结构一致。     

功能小分子电致发光材料的研究进展

有机电致发光(OLED)是近年来国际上的一个研究热点。有机电致发光器件具存低压驱动、高亮度、高效率以及能实现大面积彩色显示等优点。本文综述了有机电致发光材料的发展过程,重点介绍了目前应用于有机电致发光的各类功能小分子电致发光材料,文末展望了OLED的应用前景。     

顶部发射绿色磷光OLED的制备与瞬态性能研究

用磷光材料Ir(ppy)3制备了高效率顶部发射绿色有机发光二极管(OLED),器件的结构为:ITO/Ag/NPB/Ir(ppy)3(5wt%):TPBI/TPBI/LiF/Al。研究发现与传统的无微腔结构器件相比顶部发射器件的性能有大幅度提高,其最大效率为18cd/A。通过使用F-P腔,器件的电致发光(EL)寿命由7.6μs降低为7.1μs,有效地缓解了效率随电流密度增大而下降的问题。顶部发射器件EL共振的主峰位于505nm处,发射光谱半峰宽(FWHM)窄化为23nm,色纯度为(x=0.122,y=0.671),发射光随探测角度变化较小。最后,分析了其瞬态光电性能变化原因。