PREDICTING THE TIMING AND CHARACTERISTICS OF PETROLEUM FORMATION USING TAR MATS AND PETROLEUM ASPHALTENES: A CASE STUDY FROM THE NORTHERN NORTH SEA

The Northern Viking Graben area in the Norwegian North Sea was studied in order to investigate the petroleum formation characteristics of the Upper Jurassic Draupne Formation. In this area, the organofacies of the Draupne Formation, and consequently its petroleum generation characteristics, show significant variations. These variations represent a major risk, particularly in the context of basin modelling studies. Therefore, tar‐mat asphaltenes, oil asphaltenes and source‐rock samples from this area were studied in order to evaluate the use of migrated asphaltenes from petroleum reservoirs and tar mats in basin modelling. The samples were studied using bulk kinetic analysis, open‐system pyrolysis‐gas chromatography and elemental analyses, and the results were integrated into a basin modelling study. The results from these different sample materials were compared both to each other and to natural petroleum, in order to assess their significance for future petroleum exploration activities. We show that in cumulative petroleum systems, the transformation characteristics of the asphaltenes incorporate those of the individual source rock intervals which have contributed to the relevant reservoir system. Thus, the petroleum formation window predicted by the use of asphaltene kinetics is broad, and covers the majority of the formation windows predicted from the individual source rock samples. In addition, the molecular characteristics of asphaltene‐derived hydrocarbons show that compositional characteristics, such as aromaticity, correspond more closely to natural oils than to the respective source‐rock products. Our results confirm that the heterogeneous nature of the Draupne Formation results in a significantly broader petroleum formation window than is conventionally assumed. We propose that oil and tar‐mat asphaltenes from related reservoirs represent macromolecules which account for this heterogeneity in the source rock, since they represent mixtures of charges from the different organofacies. One conclusion is that the use of oil and tar‐mat asphaltenes in kinetic studies and compositional predictions may significantly improve definitions of petroleum formation characteristics in basin modelling.     

在糖化酶发酵生产中低温保存黑曲霉菌

在糖化酶生产过程中,为了防止正常生产中黑曲霉菌种性能的变化,对菌种的一级种母进行甘油冷冻保存,在-120℃的条件下分别保存30、60、90d,然后直接接入种母培养基,待成熟后接入种子罐,投入50t发酵罐工业生产,150h左右发酵结束。产酶单位与原工艺条件相一致。     

PECVD法低温沉积多晶硅薄膜的研究

在玻璃衬底上采用常规的PKCVD法在低温(≤400℃)条件下制得大颗较(直径＞100nm)、择优取向(220)明显的多晶硅薄膜。选用的反应气体为SiF4和H2混合气体。加入少量的SiH4后，沉积速率提高了近10倍。分析认为，在低温时促使多晶硅结构形成的反应基元应是SiFmHn(m n≤3)，而不可能是SiHn(n≤3)基团。     

影响道路沥青低温抗裂性能的因素

用弯曲梁流变仪、直接拉伸试验机对7种国内外油源沥青样品进行了低温抗裂性能的评价，从沥青的四组分、相对分子质量及其分布来分析其对沥青低温抗裂性能的影响，结果表明，沥青的相对分子质量分布宽，对沥青的低温抗裂性能有利。     

1000m^3低温氧气球罐设计

1 000 m3低温氧气球罐是目前国内首次自行设计、制造并组焊的最大的氧气球罐.从球罐材料的选择和部分结构的确定等方面论述了该低温球罐的设计工作.     

非均相成核中间相炭微球的形成过程及其结构演变

以含有喹啉不溶物的煤焦油沥青为原料，在410℃、不同反应时间下获得一系列中间相炭微球(MCMB)和小于0．5μm的碳质颗粒(SCP)。通过对中间相沥青的软化点、族组成和MCMB、SCP的形貌及MCMB断面结构的分析，认为非均相成核MCMB的形成和生长过程不同于均相成核的融并生长过程，而是SCP碳质颗粒的构筑过程，我们称之为“球形基本单元构筑”过程。在MCMB生长过程中，体系的黏度对SCP的形成和MCMB的生长起着重要的作用。非均相成核MCMB的内部结构不是三种模型结构(“地球仪”型、“洋葱”型和“同心圆”型)中的任一种，而是炭层具有收缩点的复杂结构，并且球体的结构不具有“继承性”，即随着反应时间的延长而不断发生变化和调整。MCMB内部分子在球体生长过程中的主要变化趋势是分子的不断缩合长大，而不是分子片层的平行趋向。     

列车客车用低温发热电缆地面辐射供暖系统的实验研究

对不同地板结构和不同导线间距下发热电缆地面辐射供暖系统的热工性能进行了测试分析，考察了系统的稳定性和可靠性，给出了综合比较结果，分析了影响发热电缆地面辐射供暖系统热工性能的主要因素及其影响规律。     

SA299钢冷脆行为的研究

某锅炉厂生产的锅炉汽包,在冬季制造过程中发生破裂,汽包材料为 SA299钢,对断口的初步分析发现为脆性解理断口,据此认为是冷脆破坏。本文依据冷脆特征温度 Tc 的概念对 SA299钢的冷脆行为进行了细致的分析。