Iron(II) Sulfate(VI) from Titania Production as a Raw Material for Preparation of Hydrogen Sulfide Sorbents

A hybrid sorbent material for removal of hydrogen sulfide from air was developed. The material is based on activated carbon and iron compounds obtained from waste iron(II) sulfate(VI) heptahydrate. The iron salt is deposited on the carbonaceous support and subjected to oxidation (Fe²⁺ to Fe³⁺) using atmospheric oxygen under alkaline conditions. An effect of H₂O₂ addition to the process on the composition of the resultant material was also examined. X-ray diffraction (XRD) analyses confirmed easy conversion of waste FeSO₄·7H₂O to iron oxides Fe₃O₄ and FeOOH. The activated carbon supporting iron oxides revealed a higher efficiency in H₂S elimination from air compared to the commercial activated carbon, without any modification.     

Incidence and costs of bicycle-related traumatic brain injuries in the Netherlands

The main cause of death and serious disability in bicycle accidents is traumatic brain injury (TBI). The aim of this population-based study was to assess the incidence and costs of bicycle-related TBI across various age groups, and in comparison to all bicycle-related injuries, to identify main risk groups for the development of preventive strategies.Data from the National Injury Surveillance System and National Medical Registration were used for all patients with bicycle-related injuries and TBI who visited a Dutch emergency department (ED) between 1998 and 2012. Demographics and national, weighted estimates of injury mechanism, injury severity and costs were analysed per age group. Direct healthcare costs and indirect costs were determined using the incidence-based Dutch Burden of Injury Model.Between 1998 and 2012, the incidence of ED treatments due to bicycle-related TBI strongly increased with 54%, to 43 per 100,000 persons in 2012. However, the incidence of all bicycle-related injuries remained stable, from 444 in 1998 to 456/100,000 in 2012. Incidence of hospital admission increased in both TBI (92%) and all injuries from cycling (71%). Highest increase in incidence of both ED treatments and hospital admissions was seen in adults aged 55+. The injury rate of TBI per kilometre travelled increased (44%) except in children, but decreased (−4%) for all injuries, showing a strong decrease in children (−36%) but an increase in men aged 25+, and women aged 15+. Total costs of bicycle-related TBI were €74.5 million annually. Although bicycle-related TBI accounted for 9% of the incidence of all ED treatments due to cycling, it accounted for 18% of the total costs due to all bicycle-related injuries (€410.7 million). Children and adolescents (aged 0–24) had highest incidence of ED treatments due to bicycle-related injuries. Men in the working population (aged 15–64) had highest indirect costs following injuries from cycling, including TBI. Older cyclists (aged 55+) were identified as main risk group for TBI, as they had highest ED attendance, injury rate, injury severity, admission to hospital or intensive care unit, and costs.Incidence of ED treatments due to cycling are high and often involve TBI, imposing a high burden on individuals and society. Older cyclists aged 55+ were identified as main risk group for TBI to be targeted in preventive strategies, due to their high risk for (serious) injuries and ever-increasing share of ED visits and hospital admissions.     

A review on some classes of algebraic systems

ABSTRACT

In this paper, we review some algebraic control system. Precisely, linear and bilinear systems on Euclidean spaces and invariant and linear systems on Lie groups. The fourth classes of systems have a common issue: to any class, there exists an associated subgroup. From this object, we survey the controllability property. Especially, from those coming from our contribution to the theory.     

“These devices have not been made for older people's needs” – Older adults' perceptions of digital technologies in Finland and Ireland

This article examines how older adults use and perceive digital technologies in Finland and Ireland. These two countries are at different stages regarding two important global trends – demographic ageing and digitalization. Finland, being the fastest ageing society in Europe, is also one of the leaders in implementing digital technologies in social and health care services. In contrast, Ireland is a demographically younger and less digitalized society. Drawing on focus group discussions on the usage of digital technologies, conducted with older adults in both countries, we analyse how digital technologies are adopted and viewed by older generations. The analyses showed that older adults associate digitalization with both advantages and drawbacks. To encapsulate these two contrasting aspects, we developed the term Janus-faced conceptions of technology. This concept encapsulates how the successful adoption of digital technology facilitates everyday activities whereas the inability to utilise technologies results in feelings of alienation and being out-of-touch. The digital divide was found to occur not only between generations but also between different socioeconomic groups of older adults.     

Study of the synergistic effect of boron nitride and carbon nanotubes in the improvement of thermal conductivity of epoxy composites

The enhancement of the thermal conductivity, keeping the electrical insulation, of epoxy thermosets through the addition of pristine and oxidized carbon nanotubes (CNTs) and microplatelets of boron nitride (BN) was studied. Two different epoxy resins were selected: a cycloaliphatic (ECC) epoxy resin and a glycidylic (DGEBA) epoxy resin. The characteristics of the composites prepared were evaluated and compared in terms of thermal, thermomechanical, rheological and electrical properties. Two different dispersion methods were used in the addition of pristine and oxidized CNTs depending on the type of epoxy resin used. Slight changes in the kinetics of the curing reaction were observed in the presence of the fillers. The addition of pristine CNTs led to a greater enhancement of the mechanical properties of the ECC composite whereas the oxidized CNTs presented a greater effect in the DGEBA matrix. The addition of CNTs alone led to a marked decrease of the electrical resistivity of the composites. Nevertheless, in the presence of BN, which is an electrically insulating material, it was possible to increase the proportion of pristine CNTs to 0.25 wt% in the formulation without deterioration of the electrical resistivity. A small but significant synergic effect was determined when both fillers were added together. Improvements of about 750% and 400% in thermal conductivity were obtained in comparison to the neat epoxy matrix for the ECC and DGEBA composites, respectively. © 2019 Society of Chemical Industry     

Efficient dye-sensitized solar cells based on CNTs and Zr-doped TiO2 nanoparticles

The light scattering, harvesting and adsorption effects in dye-sensitized solar cells (DSSCs) are studied by preparation of coated carbon nanotubes (CNTs) with TiO₂ and Zr-doped TiO₂ nanoparticles in the forms of mono- and double-layer cells. X-ray diffraction (XRD) analysis reveals that the phase composition of Zr-doped TiO₂ electrode is a mixture of anatase and rutile phases with major rutile content, whereas it is the same mixture with major anatase content for coated CNTs with TiO₂. Furthermore, the average crystallite size of Zr-doped TiO₂ electrode is slightly decreased with Zr introduction. Field emission scanning electron microscope (FE-SEM) images show that the porosity of Zr-doped TiO₂ electrodes is higher than that of undoped electrode, enhancing dye adsorption. UV–visible spectroscopy analysis reveals that the absorption onset of Zr-doped TiO₂ electrodes is slightly shifted to longer wavelength (the red-shift) in comparison with that of undoped TiO₂ electrode. Moreover, the band gap energy of TiO₂ nanoparticles is decreased by Zr introduction, enhancing light absorption. It is found that electron injection of monolayer TiO₂ electrode is improved by introduction of 0.025 mol% Zr, resulted in enhancement of its power conversion efficiency (PCE) up to 6.81% compared with 6.17% for pure TiO₂ electrode. Moreover, electron transport and light scattering are enhanced by incorporation of 0.025 wt% coated CNTs with TiO₂ in the over-layer of double layer electrode. Therefore, double layer solar cell composed of 0.025 mol% Zr-doped TiO₂ nanoparticles as the under-layer and mixtures of these nanoparticles and 0.025 wt% coated CNTs with TiO₂ as the over-layer shows the highest PCE of 8.19%.     

Carbon supported bimetallic Ru‐Co catalysts for H2 production through NaBH4 and NH3BH3 hydrolysis

This work investigates the effect of the addition of small amounts of Ru (0.5‐1 wt%) to carbon supported Co (10 wt%) catalysts towards both NaBH₄ and NH₃BH₃ hydrolysis for H₂ production. In the sodium borohydride hydrolysis, the activity of Ru‐Co/carbon catalysts was sensibly higher than the sum of the activities of corresponding monometallic samples, whereas for the ammonia borane hydrolysis, the positive effect of Ru‐Co systems with regard to catalytic activity was less evident. The performances of Ru‐Co bimetallic catalysts correlated with the occurrence of an interaction between Ru and Co species resulting in the formation of smaller ruthenium and cobalt oxide particles with a more homogeneous dispersion on the carbon support. It was proposed that Ru^°, formed during the reduction step of the Ru‐Co catalysts, favors the H₂ activation, thus enhancing the reduction degree of the cobalt precursor and the number of Co nucleation centers. A subsequent reduction of cobalt and ruthenium species also occurs in the hydride reaction medium, and therefore the state of the catalyst before the catalytic experiment determines the state of the active phase formed in situ. The different relative reactivity of the Ru and Co active species towards the two investigated reactions accounted for the different behavior towards NaBH₄ and NH₃BH₃ hydrolysis.