Nanogrooved carbon microtubes for wet three‐dimensional printing of conductive composite structures

Recent advances in three‐dimensional (3D) printing have enabled the fabrication of interesting structures which are not achievable using traditional fabrication approaches. The 3D printing of carbon microtube composite inks allows fabrication of conductive structures for practical applications in soft robotics and tissue engineering. However, it is challenging to achieve 3D printed structures from solution‐based composite inks, which requires an additional process to solidify the ink. Here, we introduce a wet 3D printing technique which uses a coagulation bath to fabricate carbon microtube composite structures. We show that through a facile nanogrooving approach which introduces cavitation and channels on carbon microtubes, enhanced interfacial interactions with a chitosan polymer matrix are achieved. Consequently, the mechanical properties of the 3D printed composites improve when nanogrooved carbon microtubes are used, compared to untreated microtubes. We show that by carefully controlling the coagulation bath, extrusion pressure, printing distance and printed line distance, we can 3D print composite lattices which are composed of well‐defined and separated printed lines. The conductive composite 3D structures with highly customised design presented in this work provide a suitable platform for applications ranging from soft robotics to smart tissue engineering scaffolds. © 2019 Society of Chemical Industry     

Prediction of Chameleonic Efficiency

Chameleonic properties, i. e., the capacity of a molecule to hide polarity in non-polar environments and expose it in water, help achieving sufficient permeability and solubility for drug molecules with high MW. We present models of experimental measures of polarity for a set of 24 FDA approved drugs (MW 405-1113) and one PROTAC (MW 1034). Conformational ensembles in aqueous and non-polar environments were generated using molecular dynamics. A linear regression model that predicts chromatographic apparent polarity (EPSA) with a mean unsigned error of 10 Ų was derived based on separate terms for donor, acceptor, and total molecular SASA. A good correlation (R²=0.92) with an experimental measure of hydrogen bond donor potential, Δlog P_oct-tol, was found for the mean hydrogen bond donor SASA of the conformational ensemble scaled with Abraham's A hydrogen bond acidity. Two quantitative measures of chameleonic behaviour, the chameleonic efficiency indices, are introduced. We envision that the methods presented herein will be useful to triage designed molecules and prioritize those with the best chance of achieving acceptable permeability and solubility.     

Material encapsulation in poly(methyl methacrylate) shell: A review

Material encapsulation is a relatively new technique for coating a micro/nanosize particle or droplet with polymeric or inorganic shell. Encapsulation technology has many applications in various fields including drug delivery, cosmetic, agriculture, thermal energy storage, textile, and self-healing polymers. Poly(methyl methacrylate) (PMMA) is widely used as shell material in encapsulation due to its high chemical stability, biocompatibility, nontoxicity, and good mechanical properties. The main approach for micro/nanoencapsulation of materials using PMMA as shell comprises emulsion-based techniques such as emulsion polymerization and solvent evaporation from oil-in-water emulsion. In the present review, we first focus on the encapsulation techniques of liquid materials with PMMA shell by analyzing the effective processing parameters influencing the preparation of PMMA micro/nanocapsules. We then describe the morphology of PMMA capsules in emulsion systems according to thermodynamic relations. The techniques to investigation of mechanical properties of capsule shell and the release mechanisms of core material from PMMA capsules were also investigated. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 48039.     

赤红球菌组氨酸激酶的融合表达和功能分析

对赤红球菌的组氨酸激酶基因进行密码子优化，将优化后的组氨酸激酶基因（rhks）构建重组表达质粒pGEX-4T-2-rhks。将此质粒导入到大肠杆菌BL21（DE3）中进行异源表达。在25 ℃和1 mmol/L异丙基-β-D-硫代吡喃半乳糖苷诱导条件下，组氨酸激酶融合蛋白（GST-RHK）获得成功表达，并具有催化活性。经谷胱甘肽琼脂糖亲和层析纯化，获得电泳纯的GST-RHK，其中纯化倍数为3.1，得率为19.5%。该蛋白大小约为72.75 kDa，Km、Vmax和Kcat值分别为20.92 μmol/L、0.17 μmol/（L·min）和1.4 min－1。野生型赤红球菌、组氨酸激酶基因增强株sdrhkE和组氨酸激酶基因敲减株sdrhkD在分别含有苯酚、甲苯、氯苯、异辛烷4 种有机溶剂的培养基中培养，菌株sdrhkD的生长情况都优于野生型赤红球菌，菌株sdrhkE的生长情况都低于野生型赤红球菌。本研究为进一步揭示赤红球菌SD3中组氨酸激酶涉及的信号转导途径与赤红球菌有机溶剂耐受性的关联机制提供一定参考依据。     

The biological mechanisms of butanol tolerance and the application of solvent-tolerant bacteria for environmental protection

Toxicity caused by the accumulation of butanol in fermentation media is an important factor limiting the concentration of butanol. There is currently no systematic research in place investigating the butanol tolerance mechanism of bacteria such as Clostridium acetobutylicum, which adapts to butanol stress and regulates its growth and metabolism. Here, research results related to the butanol tolerance of C. acetobutylicum are reviewed to understand the molecular basis of changes in butanol-tolerant strains. Organic solvent-tolerant bacteria play an important role in the fields of biofuel production, enzyme preparation and bioremediation. An analysis of limitations of the application of organic solvent-tolerant bacteria has revealed that future research should focus on combining the microbial tolerance phenotype with specific utilization to achieve an optimal balance between organic solvent tolerance and production. This review serves as a reference for the improvement and engineering of strains that tolerate organic solvents. © 2019 Society of Chemical Industry     

Impact of non‐solvent on regeneration of cellulose dissolved in 1‐(carboxymethyl)pyridinium chloride ionic liquid

Cellulose dissolved in ionic liquid (1‐(carboxymethyl)pyridinium chloride)/water (60/40 w/w) mixture is regenerated in various non‐solvents, namely water, ethanol, methanol and acetone, to gain more insight into the contribution of non‐solvent medium to the morphology of regenerated cellulose. To this end, the initial and regenerated celluloses were characterized with respect to crystallinity, thermal stability, chemical structure and surface morphology using wide‐angle X‐ray diffraction, thermogravimetric analysis, Fourier transform infrared spectroscopy and scanning electron microscopy. According to the results, regardless of non‐solvent type, all regenerated samples have the same chemical structure and lower crystallinity in comparison to the initial cellulose, making them a promising candidate for efficient biofuel production based on enzymatic hydrolysis of cellulose. The reduction in crystallinity of regenerated samples is explained based on the potential of the non‐solvent to break the hydrogen bonds between cellulose chains and ionic liquid molecules as well as the affinity of water and non‐solvent which can be evaluated based on Hansen solubility parameter. The latter also determines the phase‐separation mechanism during the regeneration process, which in turn affects surface morphology of the regenerated cellulose. The pivotal effect of regenerated cellulose crystallinity on its thermal stability is also demonstrated. Regenerated cellulose with lower crystallinity is more susceptible to molecular rearrangement during heating and hence exhibits enhanced thermal stability. © 2019 Society of Chemical Industry     

Using d-limonene as the non-aromatic and non-chlorinated solvent for the fabrications of high performance polymer light-emitting diodes and field-effect transistors

Aiming to environment protection, green solvents are crucial for commercialization of solution-processed optoelectronic devices. In this work, d-limonene, a natural product, was introduced as the non-aromatic and non-chlorinated solvent for processing of polymer light-emitting diodes (PLEDs) and organic field effect transistors (OFETs). It was found that d-limonene could be a good solvent for a blue-emitting polyfluorene-based random copolymer for PLEDs and an alternating copolymer FBT-Th₄(1,4) with high hole mobility (μ_h) for OFETs. In comparisons to routine solvent-casted films of the two conjugated polymers, the resulting d-limonene-deposited films could show comparable film qualities, based on UV–vis absorption spectra and observations by atomic force microscopy (AFM). With d-limonene as the processing solvent, efficient blue PLEDs with CIE coordinates of (0.16, 0.16), maximum external quantum efficiency of 3.57%, and luminous efficiency of 3.66 cd/A, and OFETs with outstanding μ_h of 1.06 cm² (V s)⁻¹ were demonstrated. Our results suggest that d-limonene would be a promising non-aromatic and non-chlorinated solvent for solution processing of conjugated polymers and molecules for optoelectronic device applications.