海洋石油开发工业污染物产生系数和排放系数研究

污染物产生系数和排放系数是工程环境影响评价的重要指标,但对于海洋石油开发工程环境影响评价来说,迄今尚无具权威性的系数可资使用。在我国近海石油开发工程污染源系统调查的基础上,对海洋石油开发行业污染物产生系数和排放系数的定义、计算方法、应用范围及应用方式进行了探讨,研究结果可为海洋石油开发工程项目环境影响评价及环境保护管理,以及行业或企业有关标准的制定提供参考。     

燃气红外线辐射器的节能与环保特性分析

论述了燃气红外线辐射器的基本原理 ,对其节能与环保特性的分析表明 :与大气式燃烧器相比 ,红外线辐射器的燃料节约率为 15 %～ 45 % ,CO2 排放量减少率为 15 %～ 48% ,CO排放量减少率为 96.2 %～ 97.7% ,NOx 减少率为 94.9%～ 96.9% ,具有显著的节能与环保效果     

尾矿堆场对地下水及其水质影响的联合模拟研究

矿产资源开发利用后的废弃物堆场常处水文地质条件复杂、区域内外边界不规整的地带。为了客观评价堆场渗漏对地下水及其水质的影响,本文提出了适宜于复杂水文地质条件、复杂内外边界条件的地下水与地下水中污染物分布规律联合模拟分析的非构造网格FVM数值模型,通过在某化工行业尾矿堆场渗漏评价的具体应用,取得了很满意的结果。     

Application of a Three-dimensional Wind Driven Circulation Model to Assess the Locations of New Drinking Water Intakes in Lake Ontario

A 3D transport model is used to perform a comparative analysis of several potential drinking water intakes located along the northwest shore of Lake Ontario between Toronto and Oshawa. The model is specifically used to assess each intake under both long- and short-term transport of a potential pollutant release from the Pickering Nuclear Generating Station and potential and actual pollutant releases from local land sources respectively. A model based on a 500 m grid resolution is calibrated using data collected in the aftermath of the 1992 tritium spill at the Pickering Nuclear Generation Station and subsequently used to simulate long-term transport. A model based on a 100 m grid resolution is verified using drogue studies and used to simulate short-term transport events. Both models are used to assess pollutant levels at each of nine potential intake locations under different wind scenarios and pollutant releases. Field data for the study included water quality and flow measurements from local sewers and rivers, and estimates of pollutant levels from the local waste water treatment plants. This paper describes the model setup for both the long-term and short-term transport models, calibration using field data, long-term transport modeling, short-term transport modeling, and the comprehensive analysis approach used to evaluate the nine potential intake locations proposed. Results indicated that four intakes in particular outperformed other intake locations by maintaining bottom pollutant levels within governmental standards and warning times that exceeded 20 hours.     

A3钢的工业大气腐蚀

在辽宁省工业城市进行 A3钢大气暴露试验。两年后测出不同地点腐蚀率。依据所记录的各试验点的气象数据和污染数据,讨论了 A3钢的大气腐蚀规律。     

电凝聚方法处理聚氯乙烯工业废水试验

对电凝聚方法处理聚氯乙烯工业废水的效果及影响因素进行了分析研究。现场运 行结果表明,该方法试验装置对聚氯乙烯废水的处理效果较好,出水水质达到综合排放 标准,对COD,BOD和TSS的去除率分别达到95％,91％和90％;对废水流量负荷的变化 具有较好的适应性,保证出水水质稳定;装置的运行成本经济实用。     

非接触CPU卡在环保排污上的应用

为确保环保排污重要数据交互、存储的安全性以及后台系统与前端总量计量设备数据传输的安全性,本文结合现有的排污许可证制度,提出了将国密SM1加密算法非接触CPU卡作为信息载体在环保排污上的应用模式,并对目前在浙江省环保领域应用的具体案例进行了剖析.     

有序介孔碳材料的模板化构筑及水处理应用研究

介孔碳材料是指孔径介于2 nm-50 nm的一类多孔碳材料。有序介孔碳材料，具有比表面积高、孔道结构规则有序、孔径分布狭窄、孔径大小可调控、表面易于修饰等结构特点和高机械强度、强吸附能力、化学惰性等性能特点，在诸多领域得到了广泛应用，特别是其作为新型吸附剂在水处理领域具有广阔的发展前景。有序介孔炭材料的制备方法主要有硬模板法和软模板法。模板和碳源的选择是控制有序介孔碳材料结构和性能的关键因素。本文从有序介孔硅、天然矿物、MOFs材料、嵌段共聚物等不同模板的角度对有序介孔碳、多级有序微/介孔碳、多级有序大/介孔碳的制备方法进行综述，并对有序介孔碳材料在水处理领域的应用进行简单介绍。     

固定化微生物细胞降解邻苯二甲酸二丁酯

The biodegradation of di-n-butyl phthalate （DBP） using immobilized microbial cells was carded out in an internal airlift loop reactor with ceramic honeycomb supports. A strain that is capable of degrading DBP was isolated from the activated sludge and identified as Bacillus sp. using 16S rDNA sequential analysis. Bacillus sp. could be rapidly attached onto the ceramic honeycomb supports. The immobilized cells could effectively degrade DBP in batch and continuous experiments. When the influent concentration of DBP was 50mg·L^-1, the effluent DBP reached less than lmg.L i with 6h hydraulic retention time （HRT） in continuous experiment. The immobilized microbial cells could grow and accumulate through the biodegradation of DBP, and the rate of degradation is accordingly increased. The possible pathway of DBP biodegradation using immobilized cells was tentatively proposed.