Photopolymerization synthesis of polyacrylic acid dispersant with methoxysilicon end groups and its application in a nano‐SiO2 aqueous system

In order to improve the dispersity and stability of the nano‐SiO₂ aqueous system with high solid content, a kind of polyacrylic acid dispersant with methoxysilicon end groups (KH590‐PAA) was synthesized by photopolymerization of acrylic acid (AA) initiated with (3‐mercaptopropyl)trimethoxysilane (KH590). After adding KH590‐PAA into the nano‐SiO₂ aqueous dispersion system (20 wt% solid content), the viscosity and the curing time of the system were measured with a rotational viscometer and the inverted bottle method. Moreover, the dispersion mechanism of KH590‐PAA for the nano‐SiO₂ aqueous system was researched by measuring the adsorption capacity, the particle size and the zeta potential of the nanoparticles with a conductivity meter, dynamic light scattering, SEM and TEM, respectively. The results showed that the methoxysilicon groups in KH590‐PAA could react with hydroxyl groups on the surface of nano‐SiO₂ in the process of stirring, which enhanced the adsorption capacity of the dispersant and then increased the surface charge of the particles. Therefore, electrostatic repulsion and steric hindrance effects between the SiO₂ nanoparticles could be further enhanced by adding the KH590‐PAA dispersant, and then the nano‐SiO₂ aqueous system exhibited better dispersity and stability. Besides, the dispersion properties of SiO₂ nanoparticles in water were closely related to the addition amount and the molecular weight of the KH590‐PAA dispersant. © 2018 Society of Chemical Industry     

Effect of doping polyacrylic acid with some dopants as studied by different techniques

The molecular weight of polyacrylic acid (PAA) was determined by a viscometric method using NaNO₃ as solvent at 30°C. The specific electric conductivities (σ) of PAA as well as PAA doped with carbon black (CB), chromium oxide (Cr₂O₃), and cupferron with different concentrations (from 0.25 to 1 wt %) were measured at a temperature range 360–400 K. IR spectra of some polymers were determined and it was shown that when PAA was doped with 0.5 wt % CB, a C? O? C band appeared at 775–875 cm^?1. The positron annihilation lifetime (PAL) spectra in PAA doped with the above‐mentioned dopants were measured as a function of their concentrations. It was observed that the short lifetime intensity I₁ decreased, whereas the intermediate lifetime intensity I₂, which is related to the conductivity of the material, increased with increasing the wt % of Cr₂O₃ and cupferron as well as at low concentrations of CB. These results are discussed in terms of the conducting island model. It was found that there were distinct positive relationships between σ and I₂. © 2002 John Wiley & Sons, Inc. J Appl Polym Sci 84: 877–883, 2002; DOI 10.1002/app.10381     

S－148芳醇不饱和聚酯树脂耐腐蚀机理研究

合成了Ｓ－１４８芳醇不饱和聚酯树脂，研究了Ｓ－１４８树脂浇铸体和玻璃钢于不同温度下在不同介质中的耐酸、碱、盐腐蚀性能，并探讨了其耐腐蚀机理。结果表明，Ｓ－１４８树脂具有优异的耐腐蚀性能，可用作耐腐蚀制品的基体树脂。     

六水氯化镁在六种多元醇中溶解度的测定和关联

六水氯化镁的溶解度是镁盐综合利用的重要基础数据。采用静态平衡法测定了六水氯化镁在1,2-丙二醇、1,3-丙二醇、1,3-丁二醇、一缩二乙二醇、二缩三乙二醇、一缩二丙二醇6种多元醇中的溶解度（278.15~328.15 K）。实验结果表明,六水氯化镁在6种多元醇中的溶解度均随着温度的升高而增大,其中在一缩二乙二醇中的溶解度最大,在二缩三乙二醇中的溶解度随着温度的变化较其他多元醇变化更为明显。使用Apelblat方程、λh方程、Van′t Hoff方程和多项式方程对溶解度数据进行了关联,结果良好,其中Apelblat方程和多项式方程拟合结果优于其他方程。利用Van′t Hoff方程计算了6种体系的溶解焓、溶解熵和吉布斯自由能。这些结果对镁盐的分离提取及镁基功能材料的制备具有重要的参考价值。     

软段含离子基团的阴离子型水性聚氨酯胶粘剂的研究(Ⅱ)——硬段结构的影响

以含有不同离子基团的聚酯多元醇为软段,采用丙酮法合成了一系列水性聚氨酯乳液。研究了不同硬段结构和硬段含量和扩链剂对其干膜物理机械性能和吸水率的影响。     

聚醚多元醇中环状齐聚物的去除(续)

(接上期第 2 3页 )3　膜分离Doraietal[16] 通过超滤除去低相对分子质量级份 ,使聚醚多元醇 ,尤其是聚四氢呋喃多元醇 ,具有较窄的分布 (Mw∶Mn=1 .2～ 1 .8)。该方法通过对多分散的熔融聚合物实施物理分级 ,达到降低相对分子质量分布的目的 ,可使最终产物的相对分子质量为 40 0～ 40 0 0 ,分散度为 1 .2～ 1 .8。该方法首先需要准备 1套交叉流动的膜分离系统 ,采用渗透膜或半渗透膜 ,膜的一边是滞留物 ,另一边是超滤液。然后 ,在起始聚合物的熔点以上 ,分解温度以下 ,且温度不大于膜的熔融和分解温度 ,将起始聚合物熔融 ,并流入该系统中…     

我国腈纶市场现状分析及启示

分析了我国腈纶生产市场现状和未来的应用领域，结合世界发展动向，提出了发展我国腈纶生产的建议。     

双金属氰化物催化剂的研究进展

综述了近年来双金属氰化物（DMC）催化剂的研究进展，指出DMC催化剂是一类用于环氧化物的高效催化剂，与传统的环氧化物催化剂相比，其制得的聚醚多元醇具有分子量高、不饱和度低、分子量分布窄、平均官能度高等优点。但该催化剂在应用过程中仍存在一些缺点。针对这些缺点，国内外的高校、企业已进行了大量的改性研究工作。     

裂解色谱法对共聚物与共混物的鉴定

李文应用裂解色谱法对丙烯酸酯等物质的共聚物与共混物进行了鉴定。     

Self-emulsifiable soybean oil phosphate ester polyols for low-VOC corrosion resistant coatings

A series of soybean oil phosphate ester polyols (SOPEP) was prepared by reaction of fully epoxidized soybean oil with phosphoric acid and simultanoeous hydrolysis in the presence of a polar solvent. The polyols were characterized by determination of acid value, oxirane number, hydroxyl value, molecular weight (GPC), and FTIR spectra. These polyols with varying amounts of acid phosphate groups could be self-emulsified to form aqueous dispersions after neutralization with organic base. These aqueous dispersion showed varying degrees of stability and their appearance ranged from opaque dispersions to translucent to clear solutions. Waterborne coating compositions were prepared using these aqueous dispersions as principal components and their thermally cured film properties were studied. it was found that by careful selection and formulation, SOPEPs can be successfully used for low-VOC waterborne coating formulations. SOPEPs with 3.5% phosphate ester content showed visibly superior corrosion resistance properties.