聚六亚甲基碳酸酯二醇增韧环氧树脂的结构与性能

采用羟基封端的脂肪族碳酸酯－聚六亚甲基碳酸酯二醇对环氧树脂进行了增韧，通过扫描隧道显微镜，扫描电子显微镜，差示扫描量热分析以及动态力学性能分析等方法研究了增韧ＥＰ的结构与性能的关系。     

尼龙66聚合反应器排汽回收利用技术改造

介绍了尼龙66连续聚合纺丝生产工艺路线,改造前反应器排放大量的过热蒸汽直接进入大气,造成能源浪费和环境污染。通过技术改造,新增饱和蒸汽塔、过滤器等废汽回收利用装置,根据高压蒸汽减温减压装置原理,将反应器排放的1.85 MPa,245℃过热蒸汽在饱和塔内进行喷淋,经过滤器除杂转换为0.8~1.0 MPa饱和蒸汽,作为浓缩槽热源;浓缩槽排放蒸汽的余热改造后作为第三温水系统和冬季取暖的热源,排汽余热得到充分利用。运行过程中,通过稳定控制反应器压力、保持反应器排汽阀的喷淋水流量和压力稳定等工艺条件,定期清理疏水阀等,可有效预防管路和设备堵塞。改造后,装置运行稳定,能耗降低,尼龙66聚合物相对黏度的均匀性和原丝一等品率均有所提高。     

冷却条件对PA66工业丝生产的影响

探讨了冷却条件对1 400 dtex／208 f PA66工业丝的纺丝性能和物理性能的影响。结果表明,改造侧吹风装置,加装蒸汽环吹和整流板,冷风室内改用弧形板,在其他相同工艺条件下,纺丝的断头次数和废丝率降低,纤维的断裂强度由8．5 cN／dtex提高至8．8 cN／dtex,达到了国外高强力PA66工业丝的质量指标。     

eDNA Inactivation and Biofilm Inhibition by the PolymericBiocide Polyhexamethylene Guanidine Hydrochloride (PHMG-Cl)

The choice of effective biocides used for routine hospital practice should consider the role of disinfectants in the maintenance and development of local resistome and how they might affect antibiotic resistance gene transfer within the hospital microbial population. Currently, there is little understanding of how different biocides contribute to eDNA release that may contribute to gene transfer and subsequent environmental retention. Here, we investigated how different biocides affect the release of eDNA from mature biofilms of two opportunistic model strains Pseudomonas aeruginosa ATCC 27853 (PA) and Staphylococcus aureus ATCC 25923 (SA) and contribute to the hospital resistome in the form of surface and water contaminants and dust particles. The effect of four groups of biocides, alcohols, hydrogen peroxide, quaternary ammonium compounds, and the polymeric biocide polyhexamethylene guanidine hydrochloride (PHMG-Cl), was evaluated using PA and SA biofilms. Most biocides, except for PHMG-Cl and 70% ethanol, caused substantial eDNA release, and PHMG-Cl was found to block biofilm development when used at concentrations of 0.5% and 0.1%. This might be associated with the formation of DNA–PHMG-Cl complexes as PHMG-Cl is predicted to bind to AT base pairs by molecular docking assays. PHMG-Cl was found to bind high-molecular DNA and plasmid DNA and continued to inactivate DNA on surfaces even after 4 weeks. PHMG-Cl also effectively inactivated biofilm-associated antibiotic resistance gene eDNA released by a pan-drug-resistant Klebsiella strain, which demonstrates the potential of a polymeric biocide as a new surface-active agent to combat the spread of antibiotic resistance in hospital settings.     

我国安全气囊袋用纤维的发展现状

介绍了我国安全气囊袋及安全气囊袋用纤维的发展现状。目前我国安全气囊袋用纤维主要依赖进口,主要有聚酰胺66工业丝和聚酯工业丝详述了国内开发的聚酰胺66安全气囊工业丝的规格与性能, 并与国外同类产品进行了对比。指出随着汽车工业的发展,安全气囊袋用纤维的需求巨大。     

表面处理对CF/PA66复合材料磨损性能的影响

采用电化学氧化法和氨气法分别对碳纤维(CF)进行表面处理后,用双螺杆挤出机共混造粒和注塑成型制备CF/PA66复合材料,研究了表面处理对CF/PA66复合材料磨损性能的影向。结果表明:随着CF含量的增加,CF/PA66复合材料的耐磨损性能提高;对CF进行表面处理,可提高CF/PA66复合材料的耐磨损性能,氨气法得到的CF/PA66复合材料的耐磨损性能优于电化学氧化法,当添加CF质量分数为15%时,其体积磨损速率比电化学氧化法的约降低48%。     

Humidifier disinfectant and use characteristics associated with lung injury in Korea

Since around the year 2000, hundreds of people in Korea have developed humidifier disinfectant‐associated lung injury (HDLI). We collected all HD exposure‐related information from the field investigations into the locations in which the 1199 registered patients had used HD. Among the people who registered, 38% (1st round = 214, 2nd = 73, 3rd = 166) were confirmed as HDLI patients. Children aged under eight years old made up the highest proportion of HDLI cases (N = 279, 62%), followed by pregnant women (N = 31, 7%). One hundred thirty‐three (29%) of the confirmed HDLI patients died. Fifty‐seven percent of HDLI patients (N = 259) developed HDLI after <1 year of HD use. The number of HDLI patients who used only the Oxy Saksak HD brand was found to be 176 (39%), followed by the brands Cefu (N = 27, 6%) and Aekyung (N = 22, 5%). HD products containing only polyhexamethylene guanidine phosphate (PHMG‐P) were the most frequently used among HDLI patients (N = 234, 52%), followed by oligo (2‐(2‐ethoxy)ethoxyethyl) guanidinium (PGH) (N = 27, 6%) and a mixture of chloromethylisothiazolinone (CMIT) and methylisothiazolinone (MIT) (N = 26, 6%). The average PHMG‐P inhalation level estimated from the patient group classified as suffering lung injury definitely associated with HD use was 145.1 μg/m³ (N = 91, SD = 395.1 μg/m³), higher than levels estimated from both the probable and possible HDLI patient groups. In conclusion, HD exposure‐related variables, including type of HD brand and estimated inhalation HD level, were associated with the risk of HDLI.     

Disruption of Membrane Integrity as a Molecular Initiating Event Determines the Toxicity of Polyhexamethylene Guanidine Phosphate Depending on the Routes of Exposure

Polyhexamethylene guanidine phosphate (PHMG-P), a cationic biocide, is widely used in household products due to its strong bactericidal activity and low toxicity. However, it causes fatal lung damage when inhaled. In this study, we investigated why PHMG-P causes fatal lung injury when inhaled, and demonstrated that the disruption of membrane integrity through ionic interaction—a molecular initiating event of PHMG-P—determines toxicity. Mice were injected intravenously with 0.9 or 7.2 mg/kg PHMG-P (IV group), or instilled intratracheally with 0.9 mg/kg PHMG-P (ITI group); they were euthanatized at 4 h and on days 1 and 7 after treatment. Increased total BAL cell count and proinflammatory cytokine production, along with fibrotic changes in the lungs, were detected in the ITI group only. Levels of hepatic enzymes and hepatic serum amyloid A mRNA expression were markedly upregulated in the 7.2 mg/kg IV and ITI groups at 4 h or day 1 after treatment, but returned to baseline. No pathological findings were detected in the heart, liver, or kidneys. To simulate the IV injection, A549, THP-1, and HepG2 cells were treated with PHMG-P in cell culture media supplemented with different serum concentrations. Increased serum concentration was associated with an increase in cell viability. These results support the idea that direct contact between PHMG-P and cell membranes is necessary for PHMG-induced toxicity.     

半芳香族聚酰胺PA6T及其PTFE复合材料的摩擦磨损性能研究

对3种不同共聚结构的聚对苯二甲酰己二胺(PA6T)树脂——聚对苯二甲酰己二胺/己内酰胺(1132)、聚对苯二甲酰己二胺/己二酰己二胺(M21)和聚对苯二甲酰己二胺/己二酰己二胺(1252)以及其聚四氟乙烯(PTFE)复合材料在干摩擦条件下的摩擦磨损性能进行了研究,并使用扫描电子显微镜(SEM)对试样的磨损面进行了分析....     

Effect of Polyhexamethylene Biguanide in Combination with Undecylenamidopropyl Betaine or PslG on Biofilm Clearance

Hospital-acquired infection is a great challenge for clinical treatment due to pathogens’ biofilm formation and their antibiotic resistance. Here, we investigate the effect of antiseptic agent polyhexamethylene biguanide (PHMB) and undecylenamidopropyl betaine (UB) against biofilms of four pathogens that are often found in hospitals, including Gram-negative bacteria Pseudomonas aeruginosa and Escherichia coli, Gram-positive bacteria Staphylococcus aureus, and pathogenic fungus, Candida albicans. We show that 0.02% PHMB, which is 10-fold lower than the concentration of commercial products, has a strong inhibitory effect on the growth, initial attachment, and biofilm formation of all tested pathogens. PHMB can also disrupt the preformed biofilms of these pathogens. In contrast, 0.1% UB exhibits a mild inhibitory effect on biofilm formation of the four pathogens. This concentration inhibits the growth of S. aureus and C. albicans yet has no growth effect on P. aeruginosa or E. coli. UB only slightly enhances the anti-biofilm efficacy of PHMB on P. aeruginosa biofilms. However, pretreatment with PslG, a glycosyl hydrolase that can efficiently inhibit and disrupt P. aeruginosa biofilm, highly enhances the clearance effect of PHMB on P. aeruginosa biofilms. Meanwhile, PslG can also disassemble the preformed biofilms of the other three pathogens within 30 min to a similar extent as UB treatment for 24 h.