Soluble and conductive polypyrrole copolymers containing silicone tegomers

Soluble and processable conductive copolymers of silicone tegomers and pyrrole were developed. This was easily accomplished by the oxidative polymerization of pyrrole monomer by Ce(IV) salt in the presence of silicone tegomers with hydroxyl chain ends. The resulting copolymers were soluble in dimethylformamide. The products were characterized by Fourier transform infrared, ¹H‐NMR, and four‐point probe conductivity, and their surface properties were investigated with contact‐angle measurements. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2896–2901, 2003     

Synthesis and properties of soluble polypyrrole doped with dodecylbenzenesulfonate and combined with polymeric additive poly(ethylene glycol)

Soluble polypyrrole (PPy) samples advanced in electrical conductivity σ were chemically synthesized with dodecylbenzenesulfonate (DBS) sodium salt as a dopant, with poly(ethylene glycol) (PEG) as an additive, and with ammonium persulfate as an oxidant. The PPy–DBS–PEG samples were soluble in organic solvents (N‐methylpyrrolinone and m‐cresol). The greater the molar percentage ratio was of DBS, the greater the solubility was of synthesized PPy composites (PPy–DBS–PEG). The maximum electrical conductivity at room temperature for PPy–DBS–PEG was 1.02 S/cm, which was in fact the true conductivity of 100/10 (mol %) PPy/DBS. The chemical composition and doping level of PPy–DBS–PEG were determined by elemental analysis. The results of Fourier transform infrared spectroscopy were used for the structural characterization of PPy–DBS–PEG. The scanning electron microscopy results showed that the electrical conductivity was related to the morphology of PPy–DBS–PEG. According to thermogravimetric analysis, PPy–DBS–PEG was more thermostable than PPy–DBS. Electron spin resonance measurements showed that the polaron and bipolaron acted as charge carriers of PPy–DBS–PEG. According to the temperature dependence of the electrical conductivity, PPy–DBS–PEG was a semiconductor and followed the three‐dimensional variable‐range hopping model. The improved electrical conductivity apparently resulted from the reduction of the crosslinking and structural defects of the PPy chains. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 1170–1175, 2005     

Modification of non‐Newtonian flow behavior of aqueous solution of poly(vinyl alcohol) by conducting polypyrrole prepared by in situ polymerization of pyrrole

The rheological behavior of an aqueous solution of poly(vinyl alcohol) (PVA) and polypyrrole (PPY) dispersions prepared by ferric chloride (FeCl₃)‐catalyzed polymerization of pyrrole was investigated at 12°C using a coaxial rotational viscometer. The results show that the addition of a low dose of FeCl₃ to the PVA solution greatly influences its rheology. The prominent shear‐thickening (dilatant) nature of PVA turns significantly pseudoplastic (shear thinning) in the presence of FeCl₃. Polypyrrole‐loaded PVA was obtained in a stable, optically clear dispersion by in situ polymerization of pyrrole in an aqueous PVA solution (5%) using FeCl₃ as the oxidative catalyst at 12°C. The PPY dispersions in aqueous PVA systems having a low loading of PPY and low Fe⁺³ content retain the dilatant character of an aqueous PVA solution; however, for an aqueous PVA system having a relatively high PPY loading and also a high Fe⁺³ content, prominent pseudoplastic (shear thinning) behavior is exhibited. The odd novel rheological patterns exhibited by a PVA solution in the absence and presence of FeCl₃ and the PVA–PPY dispersions containing FeCl₃ under different sets of conditions are explained on the basis of the complexation of PVA by Fe⁺³ and related ions and also as a consequence of some degree of H‐bonding and chemical grafting between the support polymer PVA and the PPY formed. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 3737–3741, 2004     

Characterization of nanocomposite resol resins: Individual/synergist effects of alendronic acid and sepiolite

Alendronic acid modified resol nanocomposite resins (AA‐PFNCRs) and sepiolite modified resol nanocomposite resins (SEP‐PFNCRs) have been synthesized by in situ method in the presence of base catalyst. Additionally, the synergistic effects of alendronic acid and sepiolite clay (AA‐SEP‐PFNCR) on the resol resin have been studied. The structure, morphology, and thermal properties of these nanocomposites have been investigated by Fourier Transform Infrared Spectroscopy (FTIR), Differential Scanning Calorimetry (DSC), Thermogravimetric Analysis (TGA), and X‐ray Diffraction (XRD). The results demonstrated the interactions between the fillers and resol resin. Thermal properties of nanocomposite resins were improved due to alendronic acid and sepiolite. The obtained samples were also characterized morphologically by Scanning Electron Microscope (SEM). © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43807.     

聚吡咯/壳聚糖复合膜的制备及其对Cu(Ⅱ)和Cr(Ⅵ)吸附机制

以聚吡咯(PPy)和壳聚糖(CS)为原料,制备PPy/CS复合膜,通过红外、孔径分析、热分析和SEM等手段对其结构进行表征,并研究了PPy/CS复合膜对Cu(Ⅱ)和Cr(Ⅵ)吸附性能的影响及吸附机制,考察了pH值、吸附时间、溶液起始浓度等因素对吸附率的影响.结果表明,初始浓度对吸附率影响最大;在pH=3.5、温度为33...     

Application of polypyrrole to flexible substrates

Conducting polymers such as polypyrrole may be useful in smart packaging products, provided application methods can be developed that circumvent the insolubility and infusibility of these materials. Experiments were conducted in five research areas relevant to the application of polypyrrole to nonrigid substrates. The studies reveal that application of polypyrrole from the liquid phase, either by deposition from depleted bulk solution or inkjet printing dispersions, is unlikely to give films as regular as those produced by vapor phase polymerization. Using the latter approach, two potential methods of applying patterned polypyrrole films to nonrigid substrates were developed. The first used hypochlorite to pattern a continuous film of polypyrrole, previously applied by vapor phase polymerization. The second used inkjet printing to apply an oxidant solution, whose pH had been raised with a volatile base, to nonrigid substrates. The higher pH reduced corrosion of the print head, increasing the lifetime of printers exposed to oxidative compounds. The base was subsequently evaporated by heating, and the dried oxidant used as a template for vapor phase polymerization of polypyrrole. This method gave smooth, shiny and adherent polypyrrole films on papers and polyester transparency, with high resolution. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 3938–3947, 2007     

Morphology,structure, and conductivity of polypyrrole prepared in the presence of mixed surfactants in aqueous solutions

Polypyrrole (PPy) was prepared from different mixed‐surfactant solutions with ammonium persulfate as an oxidant. Three types of combinations were selected, including cationic/anionic, cationic/nonionic, and anionic/nonionic mixed‐surfactant solutions. The surfactants used in the experiments included cetyltrimethylammonium bromide (cationic surfactant), sodium dodecyl sulfate (anionic surfactant), sodium dodecyl sulfonic acid salt (anionic surfactant), poly(vinyl pyrrolidone) (nonionic surfactant), and poly(ethylene glycol) (nonionic surfactant). The morphology, structure, and conductivity of the resulting PPy were investigated in detail with scanning electron microscopy, Fourier transform infrared spectra, and the typical four‐probe method, respectively. The results showed that the interaction between the different surfactants and the interaction between the surfactants and the polymer influenced the morphology, structure, and conductivity of the resulting polymer to different degrees. The cationic surfactant favored the formation of nanofibers, the addition of anionic surfactants produced agglomeration but enhanced the doping level and conductivity, and the presence of a nonionic surfactant weakened the interaction between the other surfactant and the polymer in the system. In comparison with the results for monosurfactant solutions, the polymerization of pyrrole in mixed‐surfactant solutions could modulate the morphologies of PPy, which ranged from nanofibers of different lengths to nanoparticles showing various states of aggregation. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 1987–1996, 2007     

Potassium persulfate-mediated preparation of conducting polypyrrole/polyacrylonitrile composite fibers: Humidity and temperature-sensing properties

Conducting polypyrrole (PPy)/polyacrylonitrile (PAN) composite fibers were prepared by the polymerization of pyrrole in the presence of PAN fibers with potassium persulfate in an acidic aqueous solution. We obtained composite fibers containing concentrations of PPy as high as 1.14% and having surface resistivities as low as 0.6 kΩ/cm² by changing the polymerization parameters, including the temperature and concentrations of pyrrole and oxidant. The tensile strength of 10.02 N/m² and breaking elongation of 32.68% for the pure PAN fiber increased up to 10.45 N/m² and 33.23%, respectively, for the composite fiber containing 0.13% PPy. The change in the resistivity of the PPy/PAN composite fiber during heating–cooling cycles in the temperature range of +5 to 120°C was examined. Scanning electron microscopy and optical microscopy images of the composite fibers showed that the PPy coating was restricted to the surfaces of the PAN fibers. Surface resistivity measurements, Fourier transform infrared spectroscopy, and thermogravimetric analysis techniques were also used to characterize the composite fibers. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Polypyrrole‐Fe3O4 Magnetic Nanocomposite Prepared by Ultrasonic Irradiation

Summary: Ultrasonic irradiation was employed to prepare polypyrrole (PPY)/Fe₃O₄ magnetic nanocomposite by chemical oxidative polymerization of pyrrole in the presence of Fe₃O₄ nanoparticles. This approach can solve the problem in the dispersion and stabilization of inorganic nanoparticles in polymer. The structure and properties of PPY/Fe₃O₄ nanocomposite were characterized by TEM, XPS, FT‐IR, TG, and XRD. PPY deposits on the surface of Fe₃O₄ nanoparticles while Fe₃O₄ nanoparticles are dispersed at the nanoscale by ultrasonic irradiation, which leads to the formation of polypyrrole‐encapsulated Fe₃O₄ composite particles. The doping level of PPY in PPY/Fe₃O₄ nanocomposite is higher than that of neat PPY. The composites possess good electrical and magnetic properties. With the increase in the Fe₃O₄ content, the magnetization increases and the conductivity first increases and then decreases. When the Fe₃O₄ content is 40 wt.‐%, the conductivity reaches a maximum value of 11.26 S · cm^?1, about nine times higher than that of neat PPY, and the saturation magnetization is 23 emu · g^?1. Also, the introduction of Fe₃O₄ nanoparticles enhances the thermal stability of PPY/Fe₃O₄ composite.

Conductivity of PPY/Fe₃O₄ composite at different Fe₃O₄ content.     

Plasma polymerization of random polyaniline–polypyrrole– iodine copolymers

This work presents the synthesis by plasma and the characterization of polypyrrole–polyaniline–iodine copolymer thin films. The objective was to study the conditions to randomly copolymerize different and noncombinable monomers to create new copolymers with enhanced selective properties. The study was focused on the influence of the monomer mass ratio r on the structure of the copolymers. The monomer ratio r is important since it represents the contribution of each monomer to the structure and to the properties of the copolymer. The mainstream techniques used to characterize the plasma polymers were infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM). The electric conductivity was studied as a function of the relative humidity. The results indicated that the copolymers with iodine have better conductive properties at lower relative humidity and that the copolymers without iodine are more stable at moderately high temperatures. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 263–270, 2002