厌氧胶快速渗补技术在汽车发动机上的应用

将金属铜易与过氧化物发生氧化还原反应生成游离基的原理应用于厌氧胶，开发了针时金属零件表面微孔进行局部渗补的实用技术。在相关技术可靠性和工艺可行性得以论证的前提下。将局部渗补技术成功地应用于渗补发动机泄漏缸盖，减少了废品损失，取得了良好的经济效益。     

A novel developed method based on single primer isothermal amplification for rapid detection of Alicyclobacillus acidoterrestris in apple juice

Alicyclobacillus acidoterrestris (A. acidoterrestris), as one of the most major spoilage-causing species within the Alicyclobacillus genus, can survive and multiply in the pasteurization process. Nowadays, A. acidoterrestris has become worldwide issue in the fruit juice industry due to its spore-forming and thermo-acidophilic features. A novel single primer isothermal amplification assay (SPIA) was developed for the rapid detection of A. acidoterrestris in apple juice. This assay was designed to target the 16S rRNA gene with a DNA/RNA chimeric primer. Detection of gene amplification was accomplished by amplification curve, turbidity and addition of single strand DNA binding dye SYBR Green II allowing visualization under ultra violet light. The specificity of the assay was confirmed using 7 strains of A. acidoterrestris and 30 strains of non-A. acidoterrestris. The SPIA was highly sensitive and the detection limit was as low as 4.8 CFU/mL. Furthermore, the apple juice inoculated with 61 CFU/mL of A. acidoterrestris could be detected as positive. The novel SPIA with visualization results was successfully applied for the detection of A. acidoterrestris and exhibited high specificity and sensitivity, making it a powerful tool for the detection of A. acidoterrestris in fruit juice industry and being conveniently applied in developing countries with limited resource.     

水性重防腐涂料在脱硫厂应用的可行性探讨

腐蚀问题一直是困扰天然气净化厂脱硫装置正常运转的难题,本文通过讨论水性重防腐涂料的研究进展,结合脱硫装置腐蚀现状,从涂料的附着力、耐水、耐蚀等漆膜性能,探讨了将环保型水性重防腐涂料运用在脱硫厂设备防腐的可行性,并提出了用自泳底漆结合水性重防腐涂料作面漆厚涂的方式来解决脱硫厂设备的腐蚀问题。     

底-9底火配用于66式152mm加农榴弹和130mm口径炮弹可行性研究

通过底-9底火的装配性能、点火能力、感度、强度以及内弹道性能试验,论述了底-9底火配用66式152mm加农榴弹、130mm口径炮弹的可行性.     

深孔黄铜火帽壳体的冷挤压成形研究

研究了某型号武器弹药黄铜火帽壳体的冷挤压成形加工工艺,并成功地用于大批量的工业生产中。该黄铜火帽壳体 外形为多台阶型,内孔为细长深盲孔(其高径比H／D=3．6)的复杂形状,因此需要采用多道次冷挤压工序来完成。在成形过 程中,通过变形程度的合理分配,选择合适的润滑剂和坯料软化退火工艺规范,获得了尺寸精度、表面质量均满足设计要 求的最终零件形状。由于材料的加工硬化作用以及可保持金属流线连续,因此冷挤压火帽壳体的强度和韧性均比切削加 工件有所提高,避免了机械加工壳体在使用过程中的胀大和开裂等缺陷。     

纳米钛粉改性环氧底漆对GFEP飞机电磁屏蔽性能的影响

航空电子设备的发展和地面电磁波源的迅速增多对玻璃纤维增强环氧树脂(GFEP)机身结构飞机的运行安全构成了威胁,亟需提升此类机身结构的电磁屏蔽性能。介绍了电磁屏蔽效能的计算方法,提出了在GFEP飞机机身涂覆纳米钛粉改性环氧底漆的应对方案。制备了纳米钛粉质量分数为1.0%的改性环氧底漆,研究了改性底漆对GFEP飞机机身典型结构样品电磁屏蔽性能的影响。结果表明:在300 kHz~1.5 GHz的测试范围内,涂覆改性底漆的测试样品的电磁屏蔽效能良好,达到9.5~29.7 dB。     

提高撞击火帽发火感度与可靠性的有效途径

介绍了撞击火帽发火感度与可靠性，经过因素分析、改进试验，研制出发火感度与可靠性较高的撞击火帽，满足了点火系统的使用要求。     

Influence of priming time and primer’s concentrations on bovine enamel bond strengths

This study investigated the effects of priming time (5, 30 or 60?s), 10-MDP (10-methacryloyloxydecyl dihydrogen phosphate)-containing primer’s concentrations (0.5, 1, 5, 10 and 20% (w/w)) and two neutral primers (5% (w/w) of 10-MDP-Na or EDTA-2Na) on bovine enamel microtensile bond strength (μTBS) using a novel prime-and-rinse approach. After priming, the enamel surfaces were thoroughly water-sprayed and dried before resin composite was placed. There was a significant influence of primer’s concentrations and priming time on bovine enamel μTBS when 10-MDP-containing primers were used (p?<?0.001), revealing the optimal priming time (30?s) and the best combination (priming with 20% of 10-MDP for 30?s). The prime-and-rinse approach might be an innovative supplement to contemporary dental adhesive procedures. The neutral primer (5% of 10-MDP-Na) produced moderate enamel μTBS on highly polished enamel surfaces, while another neutral primer (5% of EDTA-2Na) failed, suggesting that chemical bonding of 10-MDP to enamel hydroxyapatite crystallites could yield detectable bond strengths on smooth enamel surfaces.     

大鼠血栓调节蛋白基因引物的设计与研究

设计了大鼠血栓调节蛋白基因PCR扩增引物,并对引物与模板的加入量及退火温度等进行了研究,优化了PCR反应.结果表明,PCR反应所得产物电泳条带清晰,位置正确,无非特异性扩增带;用该方法设计得到的基因引物能够高效、特异性地进行PCR反应.     

高固含、高透明水性木器底漆的配方设计

阐述了高固含、高透明水性木器底漆的配方体系中水性树脂及各种助剂的选择构思,以配制出打磨性好、透明度佳及丰满度好的水性木器底漆。