Fully renewable limonene‐derived polycarbonate as a high‐performance alkyd resin

Limonene‐derived polycarbonate‐based alkyd resins (ARs) have been prepared by copolymerization of limonene dioxide with CO₂, catalysed by a β‐diiminate zinc–bis(trimethylsilyl)amido complex, and subsequent chemical modification with soybean oil fatty acids using triphenylethylphosphonium bromide as the catalyst. This quantitative partial modification was realized via epoxy–carboxylic acid chemistry, affording ARs with higher oil lengths, lower polydispersities and higher glass transition temperatures (T_g) in comparison to a conventional polyester AR based on phthalic acid, multifunctional polyol pentaerythritol and soybean fatty acid. The novel limonene polycarbonate AR and the conventional polyester AR were evaluated as coatings and both the physical drying (without the presence of the oxidative drying accelerator Borchi® Oxy Coat) and chemical curing (with Borchi® Oxy Coat) processes of these coatings were monitored by measuring the König hardness and complex modulus development with time. A better performance was obtained for the alkyd paint containing polycarbonates modified with fatty acids (FA‐PCs), which showed a faster chemical drying, a higher König hardness and a higher T_g in coating evaluation, demonstrating that the fully renewable FA‐PCs are promising resins for alkyd paint applications. © 2019 Society of Chemical Industry     

绿色再生混凝土利用途径与评定思路

就再生混凝土骨料进行深入系统的研究 ,建立了一套与现行评价天然骨料标准相一致的评定方法 ,具有工程实际意义 ,为将来实际应用作好了基础理论研究     

蒸汽凝结水除油试验研究

介绍了利用类萃取技术进行蒸汽凝结水除油的过程。利用具有亲油功能的HOL-100树脂,经过试验和工业应用证明,萃取除油可以达到1．0mg/L以下,可满足炼油化工装置锅炉用水对含油量的要求。HOL-100树脂具有在高温状态下(120℃)除油的特点。通过标定考核,萃取除油技术是一项节能、节水、环保措施,可在中石油和中石化企业推广应用。     

生物降解型聚碳酸顺丁烯二酸亚乙酯 1、合成和表征

用CO_2、环氧乙烷、顺丁烯二酸酐进行三元共聚首次得到聚碳酸顺丁烯二酸亚乙酯(PECM),并用IR、~1H NMR、DSC等进行了表征,共聚物链中CO_2和MA单元随机分布,不饱和单元可在0～0.5mol分数之间调节。共聚过程不发生双键交联和构型转化。环氧乙烷的转化率可高达到93％。控制PECM链上的双键含量并使之发生自由基加成反应,得到对热较稳定的可溶性产物。     

Modeling the continuous melt transesterification of bisphenol-A and diphenyl carbonate in a continuous stirred tank reactor

A model of continuous melt transesterification of bisphenol-A and diphenyl carbonate in a continuous stirred tank reactor is developed using phase equilibria assumption and the method of molecular weight moments. The model equations can be simplified into a polynomial system that has 17 equations and 17 unknowns. Solution of the polynomial system gives out almost every aspects of the continuous transesterification process. Molecular weight and polydispersity index, end group ratio of hydroxyl to phenyl carbonate, contents of molecular species, and lost diphenyl carbonate fractions are studied in different operation parameters.     

Compatibility between Polyamide 6 and Polycarbonate

Polyamide （PA6） and polycarbonate （PC） were prepared by a Brabender mixer （ PLV- 151） at 240℃ with 30 rpm for duration of 8 and 6 minutes respectively. The epoxy resin （E） addition can lead to substantial microstructural changes in the PA6/PC blends. Scanning electron microscope （SEM） was used to observe the mixtures characterized by the domains of clearly segregated homophases and voids between the two polymers. PA6/PC of polyamide 6 and polycarbonate with epoxy resin addition under the composition ratio of 20/80, 20/80/1, 40/60/1 and 40/60, were tested to verify the key role of epoxy in promoting the compatibility of PA6 with PC during blending.     

流水线上机械手克隆转换开关改性塑料的选择

转换开关是用在工业生产自动流水线机械手中一种易磨损和大量消耗的塑料制品,以前依靠外国进口,花费了大量外汇。由于转换开关的精度极高,甚至超过金属件的制造精度。故不仅要求制品在成型加工过程中不能有微小的变形,甚至需要严格控制塑料的收缩量。使得所有成型孔的精度达到IT6级以上,平面度不大于0.02 mm,圆柱度不大于0.01 mm。通过对亚光微珠增强聚碳酸脂改性材料的选择,实现控制了制品变形量和提高了耐磨性的目的,通过超高精度孔的二次限制工艺的实施,使得制品孔的精度可达到IT4级以上,圆柱度为0.002 mm以内。国产转换开关完全取代了进口产品,且其精度和寿命远高于进口产品,为超高精度注射件加工创出了一种新方法,也为有关单位节约了大量外汇。     

再生砖混骨料混凝土柱的小偏心受压性能

通过小偏心受压性能试验对比研究3根的天然骨料混凝土柱和3根同强度全再生砖混骨料混凝土柱,强度分别为C25、C30和C35. 对6根柱进行加载试验,分析再生砖混骨料混凝土柱相比于同强度天然骨料混凝土柱在受力过程、破坏特征、变形能力与承载力等方面的差异. 试验发现,再生砖混骨料混凝土柱在小偏心加载至破坏的过程中,具有与天然骨料混凝土柱相似的3个受力阶段,且符合平截面假定. 与同强度的天然骨料混凝土柱相比,变形较大,但再生砖混骨料混凝土柱的极限承载力略高,原因可能在于两者轴心抗压强度的差异.     

熔体温度对气体辅助注射成型PC／PE共混物形态的影响

分别在低温（200℃）和高温（270℃）下制备了聚碳酸酯／聚乙烯（PC／PE）共混物的气体辅助注射成型制品，通过扫描电镜对PC相不同部位的形态观察，发现分散相PC的形变和分布受成型温度的影响比较大。在低温成型时，分散相PC从表层到气道都有变形，而在高温成型时，分散相PC在气道部位几乎没有变形。在形态分析的基础上，探讨了温度对气体辅助注射成型共混物形态的形成和分布的影响机理。     

Magneto-sensitive nickel nanowires fabricated by electrodeposition into multi- and single-ion track templates

Polycarbonate templates of (30±1) μm thickness containing cylindrical etched-track nanochannels of (500±50) nm diameter were used for electrodeposition of Ni nanowires. Using 10⁴ channels per cm², the most favourable deposition potential of  − 1.0 V was determined in a potentiostatic mode by varying the deposition potential with respect to an Ag/AgCl reference electrode over a range between  − 0.1 V and  − 1.5 V. The deposition efficiency at  − 1.0 V was estimated around 10%. The resulting single wires had a resistance around 200 Ω and showed an anisotropic magnetoresistance (AMR) effect of 1%, applicable to directionally sensitive magnetic field sensors.