Vertical cyclic loading response of geosynthetic-encased stone column in soft clay

Dynamic responses of the geosynthetic-encased stone column (GESC) supported embankment under traffic loads have become a hot topic. This study investigates the responses of GESC improved ground under vertical cyclic loading. A series of laboratory tests in a designed model test tank have been carried out with different loading parameters (varied loading amplitudes and frequencies), different column dimensions (varied encasement lengths and column diameters). In the tests, the soil-column stress distribution, accumulated settlement of loading plate, excess pore water pressure in the surrounding soil and lateral bulging of the stone column are monitored. Experimental results indicate that the vertical stress on the stone column increases with the increment of encasement length, and decreases with the increment of column diameter, loading amplitude and loading frequency. The increasing stress on the surrounding soil leads to a greater accumulated settlement of the loading plate and excess pore water pressure, while the increasing stress on the column leads to larger lateral bulging of the column. Excess pore water pressure dissipates effectively through vertical and horizontal drainage channels provided by the stone column and the sand bed. The geosynthetic encasement prevents the clay from obstructing the drainage channel by filtration and guarantees the drainage effect.     

西霞院水利枢纽工程泄洪闸振冲碎石桩基础处理

通过西霞院水利枢纽工程泄洪闸振冲碎石桩基础处理施工方法论述,给出了加砂层振冲碎石桩施工造孔水压、水量、成孔速度、填料级配、填料方法以及振密电流值、留振时间等施工控制参数。     

Finite-element analysis and experimental study on tensile fatigue behaviour of bitumen–stone adhesion

Tensile fatigue behaviours of bitumen–stone adhesion were investigated using a dynamic mechanics analyser under stress‐controlled mode at two temperatures of 5 and 25°C and various controlled‐stress levels. Failure characteristics including interfacial failure and cohesive failure were examined using image analysis of fracture surfaces. Finite‐element analysis on stress distributions was conducted under different temperatures, film thickness and interfacial bonding conditions. A Coulomb–Mohr like criterion in combination with shear and normal stresses is proposed to deal with the extreme thin adhesive layer, which can be further simplified into an adhesive zone without significant loss of accuracy for stress analysis.     

榆树林油田砂岩储层敏感性研究

榆树林油田储层粘土矿物含量较高，各种注入条件和施工条件都会对该储层造成相应的伤害，应采取相应的防护措施，为防止速敏的发生，储层的注水速度应控制在临界流速（1.0mL/min）以下，在油井转注时，可先注入1.09PV的含粘土稳定剂的进行处理，以提高产量或注入量，注入阴离子表面活性剂配置的活性水再注入地层水，不能增加地层水的渗透率，该项试验研究对指导榆树林油田的开发具有重要的意义。     

Criteria and methodology for the evaluation of conservation interventions on treated porous stone susceptible to salt decay

Susceptibility of stone to salt decay is directly related to its microstructural and mechanical characteristics. In the present work, a porous stone from a quarry in Cyprus was examined. Samples of this stone were consolidated and protected with certain conservation materials. The modification of microstructural characteristics of the stone was evaluated by mercury intrusion porosimetry, while its mechanical characteristics were measured by compressive and bending strength tests. From these data, the susceptibility of Cyprus stone to salt (NaCl) decay was estimated. The values of crystallization pressure of NaCl were calculated and compared to the experimentally measured compressive and tensile strength of the stone, in order to examine the probability of stone disruption due to salt crystallization. The development of the phenomenon after coarse pores’ filling with crystals, i.e. crystallization of salts in capillaries or mechanical failure of the stone, was determined by thermodynamic analysis. Additionally, artificial weathering tests of marine salt spray were performed for the evaluation of stone’s durability after the conservation. The treated stone proved to be resistant to salt decay, as it presented ameliorated microstructural and mechanical characteristics, concerning decay due to soluble salt crystallization. The most possible thermodynamic scenario was small pores repletion with crystals, avoiding mechanical failure of the stone.     

不清根手工双面焊材料及工艺研究

本文分析了中厚板传统手工双面焊存在的诸如打底焊焊缝质量无法保证，需用碳弧气刨清根；工人劳动强度大；生产效率低；焊接质量不稳定等主要问题。为提高打底焊焊道质量，不用清根使背面得到良好的凹成形，研制了适合Ｘ形坡口的梯形体陶瓷衬垫。探讨了焊缝背面成形的主要影响因素及控制方法。     

浆砌石衬砌在渠道防渗中的应用及对策

总结了浆砌石应用的历史,介绍了浆砌石的结构特性和施工工艺,从造价方面、防渗效果及施工三方面分析了浆砌石衬砌主要存在的问题,并提出了相应的解决对策,指出浆砌石衬砌在渠道防渗应用中应控制施工质量,从而更好地提高防渗效果。     

预应力长线台座的施工方法及要点

叙述我国中小型建筑构件厂最常用的预应力长线台座的建造过程，以及必须注意的事项及质量控制方法。     

大碎石柔性基层沥青性能分析

用沥青大碎石柔性基层对旧路面进行补强，可以有效地提高路面的使用性能，减少反射裂缝的产生，延长道路的使用寿命。对沥青大碎石柔性基层用加德士AH-70、SBS改性沥青和MAC改性沥青分别进行试验，通过试验结果和经济性能对比分析，找到适合此结构的最佳沥青。     

微观视域的福州乌山摩崖石刻景观分析

本文通过实地调研,结合摩崖石刻的内容形式和空间位置,选取具有代表性的"张伯阳等题名"、"道山亭"、"石天-双峰梦"和"天秀岩"为研究对象,以儿童和成人的视角分析微观视域下的摩崖石刻景观空间."张伯阳等题名"成人的欣赏方式为俯视,儿童经历俯视-平视-仰视的过程;"道山亭"成人的欣赏方式以平视为主,仰视为辅,儿童则以仰视为主,平视为辅;"石天"-"双峰梦"和"天秀岩"成人和儿童多以仰视为主.