Rational Designs for Lithium-Sulfur Batteries with Low Electrolyte/Sulfur Ratio

Lithium-sulfur batteries (LSBs) are considered a promising next-generation energy storage device owing to their high theoretical energy density. However, their overall performance is limited by several critical issues such as lithium polysulfide (PS) shuttles, low sulfur utilization, and unstable Li metal anodes. Despite recent huge progress, the electrolyte/sulfur ratio (E/S) used is usually very high (≥20 µL mg⁻¹), which greatly reduces the practical energy density of devices. To push forward LSBs from the lab to the industry, considerable attention is devoted to reducing E/S while ensuring the electrochemical performance. To date, however, few reviews have comprehensively elucidated the possible strategies to achieve that purpose. In this review, recent advances in low E/S cathodes and anodes based on the issues resulting from low E/S and the corresponding solutions are summarized. These will be beneficial for a systematic understanding of the rational design ideas and research trends of low E/S LSBs. In particular, three strategies are proposed for cathodes: preventing PS formation/aggregation to avoid inadequate dissolution, designing multifunctional macroporous networks to address incomplete infiltration, and utilizing an imprison strategy to relieve the adsorption dependence on specific surface area. Finally, the challenges and future prospects for low E/S LSBs are discussed.     

Selective Analysis of Sulfur-Containing Species in a Heavy Crude Oil by Deuterium Labeling Reactions and Ultrahigh Resolution Mass Spectrometry

A heavy crude oil has been treated with deuterated alkylating reagents (CD₃I and C₂D₅I) and directly analyzed without any prior fractionation and chromatographic separation by high-field Orbitrap Fourier Transform Mass Spectrometry (FTMS) and Fourier Transform Ion Cyclotron Resonance Mass Spectrometry (FT-ICR MS) using electrospray ionization (ESI). The reaction of a polycyclic aromatic sulfur heterocycles (PASHs) dibenzothiophene (DBT), in the presence of silver tetrafluoroborate (AgBF₄) with ethyl iodide (C₂H₅I) in anhydrous dichloroethane (DCE) was optimized as a sample reaction to study heavy crude oil mixtures, and the reaction yield was monitored and determined by proton nuclear magnetic resonance spectroscopy (¹H-NMR). The obtained conditions were then applied to a mixture of standard aromatic CH-, N-, O- and S-containing compounds and then a heavy crude oil, and only sulfur-containing compounds were selectively alkylated. The deuterium labeled alkylating reagents, iodomethane-d₃ (CD₃I) and iodoethane-d₅ (C₂D₅I), were employed to the alkylation of heavy crude oil to selectively differentiate the tagged sulfur species from the original crude oil.     

玉米生产施用锰渣混配肥的肥效试验

电解金属锰渣含有丰富的矿物质营养元素,将其处理加工成锰渣混配肥,在农作物生产中应用能促进作物的生长和提高产量,是可以开发的新型肥料资源.     

由含硫原油生产Ⅰ类润滑油基础油中的问题

论述了由含硫原油生产Ⅰ类润滑油基础油的重要性,并介绍了由含硫原油生产Ⅰ类润滑油基础油加工过程中存在的问题,认为并非由含硫原油不能生产优质的基础油,而是我国现有的基础油生产装置是按加工大庆原油设计,不能完全适合加工含硫原油的需要,所以应适当改造。例如:增加丙烷脱沥青的溶剂比,用加氢补充精制代替白土精制等,此外,在含硫原油生产基础油时,对原油也应适当选择。     

云南磷肥工业副产氟资源综合利用途径初探

根据云南磷肥工业发展情况 ,提出对磷肥工业副产氟资源综合利用的设想 ,并介绍目前国内已有的一些氟资源综合利用的工艺技术     

无机复合微量元素肥料（FTE）的合成及其应用效果研究

重点研究了无机复合微肥（简称ＦＥＴ）的合成条件及生成规律，并详细探讨了组成、工艺对ＦＴＥ微肥的主要技术指标——枸溶性的影响。同时，介绍了粮、棉、果、菜等各类农作物施用ＦＴＥ后取得的显著效果，为ＦＥＴ在作物上大面积推广应用提供了理论和实践依据。     

渣油中硫化物类型分布与化学转化性能

用X射线光电子能谱（XPS）定量研究了Athabasca渣油及其加氢裂化渣油，流化焦化渣油中的硫化物类型，用超临界流体萃取分馏将3种渣油分别分离成9－14个窄馏分及残渣，测定其中的硫醚，噻吩，亚砜和砜类硫原子的分布，讨论了加氢裂化和热裂化反应脱除硫化物的反应性能。     

SO2转化温度异常情况分析

结合凤山实业总公司硫酸车间 SO2 转化系统的具体工艺流程 ,分析近几年转化系统出现温度不正常的原因 ,提出解决方法     

云南省磷肥工业产品结构的现状及发展建议

分析了国内外磷肥工业产品的市场形势及发展趋势，同时对云南省磷肥产品的发展提出建议。     

含葡萄糖基水溶性硫化黑的合成

本文以C.I.硫化黑1为原料,经葡萄糖还原成隐色体后,再与葡萄糖缩合,合成出含葡萄糖基水溶性硫化黑。合成方法分别采用了焙烘法和水介质中合成。结果表明,水介质中合成的含葡萄糖基水溶性硫化黑溶解度好于焙烘法。