Understanding δ-Bi2O3 fluorite degradation mechanism and related solutions for promising applications in distributed multigeneration

Oxygen selective membrane on the base of cermet δ-Bi₂O₃/Ag with an interpenetrating structure has the maximum potential efficiency of air separation. However, the degradation processes, including the phase degradation of fluorite δ-Bi₂O₃, do not make it possible to create a membrane with the required perfection and durability. In this work, the ordering of oxygen vacancies with the transformation of fluorite into the rhombohedral phase (S.G. R-3) was studied by powder HT XRD in situ at 600 °C on dense Bi_0.78Er_0.2Hf_0.02O_1.51 ceramics. Fast regeneration of disordered fluorite occurs at T = 640–700 °C. The phase degradation of fluorite due to the segregation of dopants at the second stage leads into stable phases - sillenite, tetragonal or rhombohedral phase (S.G. R-3m), depending on the composition of δ-Bi₂O₃. Fast regeneration of fluorite occurs when heated to 820 °C, which is unacceptable for membranes. Analysis of all available data allows us to propose approaches to optimize the composition of δ-Bi₂O₃ and technical solutions for creating durable oxygen selective membranes with promising use in distributed multigeneration. As a result of the analysis, a new solid electrolyte with better parameters was obtained.     

子波变换理论及其在信号处理中的应用

子波分析的形成是傅里叶分析发展史上里程碑式的进展，子波分析优于傅里叶交换的地方在于它在时域和频域同时具有良好的局部化性质，从而可以把分析的重点聚焦到任意的细节，被人们誉为数学显微镜，成为近年来在工具和方法上的重大突破。本文将子波理论中的主要定理、结论、变换特性和一些重要概念加以综述，以促进子波理论的应用。本文的重点在于介绍多分辨率分析和子波分析及其实现、子波变换及其算法、子波和滤波器组等的重要内容，并介绍其在信号处理中的应用及研究动态。     

Al-Cu-Fe QUASICRYSTALLINE PHASE FORMATION BY MECHANICAL ALLOYING

Al-Cu-Fe alloys were prepared from elemental powders in a high-energy planetary ball mill. A sequence of solid state reactions resulting in quasicrystal (QC) phase formation takes place during heating of the as-milled powder. These reactions were studied by both differential scanning calorimetry and x-ray diffraction methods. Mechanically alloyed powders were consolidated by cold and hot pressing, as well as by explosive compaction. After annealing at sufficiently high temperatures, the consolidated samples are single-phase QC, except the ones consolidated by explosion. The high reactivity of the as-milled alloys causes the appearance of high porosity of the consolidated samples after the annealing.     

A hybrid extended finite element/level set method for modeling phase transformations

A hybrid numerical method for modelling the evolution of sharp phase interfaces on fixed grids is presented. We focus attention on two‐dimensional solidification problems, where the temperature field evolves according to classical heat conduction in two subdomains separated by a moving freezing front. The enrichment strategies of the eXtended Finite Element Method (X‐FEM) are employed to represent the jump in the temperature gradient that governs the velocity of the phase boundary. A new approach with the X‐FEM is suggested for this class of problems whereby the partition of unity is constructed with C¹(Ω) polynomials and enriched with a C⁰(Ω) function. This approach leads to jumps in temperature gradient occurring only at the phase boundary, and is shown to significantly improve estimates for the front velocity. Temporal derivatives of the temperature field in the vicinity of the phase front are obtained with a projection that employs discontinuous enrichment. In conjunction with a finer finite difference grid, the Level Set method is used to represent the evolution of the phase interface. An iterative procedure is adopted to satisfy the constraints on the temperature field on the phase boundary. The robustness and utility of the method is demonstrated with several benchmark problems of phase transformation. Copyright © 2002 John Wiley & Sons, Ltd.     

An orthogonal basis for the hyperbolic hybrid polynomial space

Motivated by the wide usage of the Tchebyshev basis and Legendre basis in the algebra polynomial space, we construct an orthogonal basis with the properties of the H-Bézier basis in the hyperbolic hybrid polynomial space, which is similar to the Legendre basis and holds remarkable properties. Moreover, we derive the transformation matrices that map the H-Bézier basis and the orthogonal basis forms into each other. An example for approximating the degree reduction of the H- Bézier curves is sketched to illustrate the utility of the orthogonal basis.     

A singular loop transformation framework based on non-singular matrices

In this paper, we discuss a loop transformation framework that is based on integer non-singular matrices. The transformations included in this framework are called Λ-transformations and include permutation, skewing and reversal, as well as a transformation calledloop scaling. This framework is more general than existing ones; however, it is also more difficult to generate code in our framework. This paper shows how integer lattice theory can be used to generate efficient code. An added advantage of our framework over existing ones is that there is a simple completion algorithm which, given a partial transformation matrix, produces a full transformation matrix that satisfies all dependences. This completion procedure has applications in parallelization and in the generation of code for NUMA machines. This work was supported by the Cornell Theory Center, NSF Presidential Young Investigator award #CCR-8958543. by NSF Grant #CCR-9008526, and by a grant from the Hewlett-Packard Company.     

Synthesis of Thermally Stable χ-Alumina by Thermal Decomposition of Aluminum Isopropoxide in Toluene

Thermal decomposition of aluminum isopropoxide in toluene at 315°C resulted in χ-alumina that had high thermal stability, whereas the reaction at lower temperatures resulted in formation of an amorphous product. The χ-alumina thus obtained directly transformed to α-alumina at ∼1150°C, bypassing the other transition alumina phases, whereas the amorphous product transformed to γ-alumina and then to θ-alumina before final transformation to α-alumina. When the χ-alumina, solvothermally synthesized at 315°C, was recovered by the removal of the solvent at the reaction temperature, thermal stability of the product was improved further. This procedure is convenient because it avoids bothersome work-up processes that yield large-surface-area and large-pore-volume alumina.     

Speaker adaptive voice source modeling with applications to speech coding and processing

We discuss the use of low-dimensional physical models of the voice source for speech coding and processing applications. A class of waveform-adaptive dynamic glottal models and parameter identification procedures are illustrated. The model and the identification procedures are assessed by addressing signal transformations on recorded speech, achievable by fitting the model to the data, and then acting on the physically oriented parameters of the voice source. The class of models proposed provides in principle a tool for both the estimation of glottal source signals, and the encoding of the speech signal for transformation purposes. The application of this model to time stretching and to fundamental frequency control (pitch shifting) is also illustrated. The experiments show that copy synthesis is perceptually very similar to the target, and that time stretching and “pitch extrapolation” effects can be obtained by simple control strategies.     

Transformations of residual fertilizer P in a semi-arid tropical soil under eight-year peanut-wheat rotation

Long-term transformations of residual phosphorus (P) governs the availability of phosphorus to crops. Very limited information is available on the transformations of residual fertilizer P in semi-arid tropical soils under long-term crop rotations. Therefore, using sequential phosphorus fractionation procedure, we studied changes in labile and stable forms of inorganic and organic P in a semi-arid alluvial soil (Typic Ustisamments) after eight years of annual fertilizer P application either to one crop (alternate) or to both crops (cumulative) in a peanut (Arachis hypogaea) — wheat (Triticum aestivum) rotation.Total residual fertilizer P in soil (P recovered from P-fertilized minus control plots) ranged from 62 to 176 mg P kg^–1. In the alternate P treatments (P applied to peanut or wheat only), on an average of 3 rates of applied P (13, 26 and 39 kg P ha^–1), in surface (0–15 cm) and subsurface (15 to 30 cm) soil, respectively, residual fertilizer P consisted of 14.8 and 2.2% resin-P, 8.6 and 2.8% NaHCO₃-P, 6.3 and 0% microbial-P, 31.4 and 4.2% NaOH-P, 7.8 and 3.0% aggregate protected-P, 12.5 and 3.0% HCl-P, 3.4 and 0% H₂SO₄-P. The corresponding values for surface and subsurface soils of cumulative P treatments (P applied to both peanut and wheat) were: 12.8 and 1.6% resin-P, 6.9 and 2.3% NaHCO₃-P, 4.7 and 0% microbial-P, 32.5 and 4.2% NaOH-P, 5.6 and 2.0% aggregate protected-P, 14.8 and 3.8% HCl-P, 6.7 and 2.1% H₂SO₄-P. Considerable lower values for the 15–30 cm depth indicate only a very small movement of residual P to the subsoil.Significantly lower amount of fertilizer P (28% and 44%) found in labile (resin, NaHCO₃ and microbial P) and semi-labile (NaOH and sonicated NaOH P) fractions for the cumulative P treatment than alternate P treatment (35 and 46%, respectively) suggests that increased rates and frequency of applied P tend to enhance the conversion of residual P to stable forms which are less available to plants. About 12 to 19% of residual fertilizer P found as organic P in labile and semi-labile forms confirmed that organic P increased with long-term fertilizer management. In conclusion, the results of our study suggest that the alternate application of fertilizer P to a crop, as is shown for wheat, helps reduce the transformations of residual P to stable P forms.