Control of the particle microstructure during the synthesis of bulk-polymerized transparent methacrylate-acrylonitrile-butadiene-styrene resin

A series of methacrylate-acrylonitrile-butadiene-styrene (MABS) resins was prepared using bulk polymerization. The polarity of the continuous phase and the compatibility of two phases were changed by adjusting the methyl methacrylate (MMA) content, choosing values that were close to styrene-butadiene rubber solubility value. The possibility of controlling the microstructure of the MABS resin by changing the polarity of the components and the compatibility of two phases was assessed. The dynamic mechanical analysis shows that the compatibility of two phases varies with the MMA content. The morphological analysis shows that increasing MMA contents results in a gradual decrease in the sub-inclusion structure with a network skeleton of rubber particles, and that all the particles become solid rubber when the MMA content reaches 75%. The sub-inclusion structure reappears but does not have a network skeleton when the MMA content is 90%. The impact strength and morphological analysis indicate that the solid rubber particles and the sub-inclusion structure with a network skeleton provide excellent toughness, while the sub-inclusion structure without a network skeleton does not. In contrast, the transmittance of the ABS resin first increased and then decreased with increasing MMA content.     

矿化剂对氧化铬绿色釉呈色性能的影响

针对氧化铬绿色釉存在色调暗不够鲜艳的缺点，研究了矿化剂对其呈色性能的影响，经分光光度分析的扫描电镜测试，表明矿化剂具有一定的助熔作用和还原性，从而提高了氧化铬绿色釉的鲜艳度和着色力，增强了装饰性，同时矿化剂还能降低烧成温度，节约能源，具有应用价值。     

掺铝氧化锌(AZO)导电薄膜的研究进展

综述透明导电薄膜的性能、种类、制备工艺、研究及应用状况,重点讨论掺铝氧化锌(AZO)薄膜的结构、导电机理、光电性能和当前的研究焦点。并指出,为了进一步提高透明导电薄膜的性能,应从以材料选择、制备工艺、多层膜光学设计等方面深入研发,以满足尖端技术的需要。     

一种新型艺术釉——绒光釉

通过分析易结晶原料的性能特点，确立了合理的绒光釉配方及相应的工艺参数，探讨了釉料形成机理，研制出一种适合精陶及其它陶瓷产品的艺术釉－绒光釉。     

液相对流对固液界面稳定性的影响

以模型合金丁二腈－乙醇的强制性晶体生长为基础，利用自行研制的液相对流驱动装置，详细考查了液相自然对流及强迫对流作用下，模型合金平界面失稳的动态生长过程，证实了液相的流动加快了液相温度与浓度分布的均匀化，从而增强了液／固界面的稳定性。并且随流动速度的增加，界面稳定性提高。     

透明加解密系统原理与实现分析

介绍透明加解密系统产生的背景、原理以及实现技术,同时还对对称加密算法进行简要的介绍,对于加解密系统的使用提出了独特见解。     

Effect of Ca2+ and Mg2+ ions on the sintering and spectroscopic properties of cr-doped yttrium aluminum garnet ceramics

In this work, we investigated the effects of Ca²⁺ and Mg²⁺ ions and annealing temperature on the spectroscopic parameters of chromium-doped yttrium aluminum garnet ceramics (Cr:YAG). Samples were obtained with either a separate or a simultaneous addition of calcium and magnesium oxides. To achieve this, aqueous suspensions were prepared using Y₂O₃, Al₂O₃, Cr₂O₃, MgO, and CaO high-purity powders as raw materials. The obtained suspensions were freeze-granulated, pressed into pellets, debinded, and subjected to reactive sintering in vacuum at 1715°C for 6 h. Each material was annealed in air with temperatures between 1300 and 1700°C. Samples were also compared to Cr:YAG ceramics with the addition of silica as a sintering aid. All the materials obtained were then exposed to 445 nm excitation, and emission spectra in the visible and infrared wavelengths were recorded. The results showed that the emission spectra of Cr:YAG ceramics varied according to the annealing conditions: as-sintered samples exhibited strong emissions of around 680 nm and, after air annealing, of around 1400 nm. This phenomenon is attributed to the Cr³⁺→Cr⁴⁺ transition. Samples doped solely with MgO exhibited the highest emission intensity in the infrared region. Thus, Mg²⁺ ions provided the best conversion efficiency of chromium ions.     

油滴釉制作工艺的研究

在研制氧化气氛烧制油滴黑釉器的基础上 ,探讨了影响油滴釉形成的工艺因素。通过一系列试验 ,进一步验证了油滴釉在结晶过程中主要发生了液液分相 ;釉料的化学组成是油滴晶斑形成的先决条件 ;釉层厚度、烧成制度等是决定釉面效果的重要因素 ;油滴晶斑的呈色不仅与烧成气氛有关 ,还与着色氧化物的引入有关。     

工业废渣在复合无光乳浊釉中的应用

以废瓷粉、废玻璃粉、粉煤灰等工业废渣为主要原料．添加其它常用的陶瓷原料，成功研制出乳白色、彩色(添加色料)、费色(以粉煤灰着色)三个系列无光乳浊釉。这些釉的烧成温度为1180℃左右，烧成气氛为氧化气氛．它们具有废渣用量大(废渣总用量40-50％)、熔块用量低(0～12％)、成本低等特点。     

搪瓷烧成温度计算方法的探讨

搪瓷釉的烧成过程是一种“液相烧结”过程,其传质有赖于熔体的粘性流动。根据玻璃态物质化学组成—结构—粘度—温度的一般关系,推导出计算瓷釉烧成温度(T_烧)的经验公式。