Ni-Al2O3纳米复合电镀工艺的初步研究

初步研究了复合电镀各工艺条件：电流密度、镀液pH值和温度以及搅拌方式对Al2O3纳米微粒在镍基复合镀层中含量的影响。研究表明：电流密度增大不利于提高镀层中纳米微粒的含量；pH值增大也明显使复合量降低;镀液温度升高，镀层中微粒的复合量随之略有改变；电镀时，加强搅拌或适当改变搅拌方式，可以使复合镀居中的纳米微粒含量提高。还利用扫描电镜及能谱对Ni-Al2O3镀层表面进行了观察与分析。     

粉镀(渗)锌技术及其工业应用

概述了粉镀（渗）锌专利技术的开发概况、工艺原理及渗镀层性能特点，并与热镀锌做了比较，对其产品检验、使用范围等也作了介绍。     

镍铬合金镀层的相组成和界层结构

生产搪资制品中的一个迫切问题是保护镍铬合金加热元件和焙烧器件免受高温腐蚀，为此研制出一系列玻璃釉质镀层成分，然而在镍铬合金工业生产中它们并没有被采用。     

Ground-based investigation of atomic oxygen effects on naked Ag and Ag with protective organic coating

Protective behavior of organic coatinge of alkyd,epoxy,urethane and siloxance applied to silver solar cell interconnects and erosion of Ag were investigated by exposure experiments to ground simulation atomic oxygen(AO).Evaluations of their protective properties were made through assessing their mass cfhange characteristics,chemical and physical changes to Ao attack.The specimens,after exposure were analyzed with SEM/EDAX and XPS.The results indicated that the silver is heavily etched.some coatings such as epoxy,alkd,urethane are seriously degraded or removed as volatile oxides and morphology of coatings changes.It is evident that siloxane coatings have excellent properties for anti-AO attack.The erosion product consists of silicon dioxide layer of compact texture and is left on the surface to provide adequate protection fro further attack by the energetic AO.     

镍钴合金镀层的电沉积及其耐蚀性的研究

研究了Ｎｉ－Ｃｏ合金的电积过程，讨论了电镀工艺条件的改变对合金镀层钴含量的影响。实验结果表明，选择适当的阴极电流密度、电解液温度和镀液ＰＨ值等，可以获得表面光洁、平整和致密的耐蚀性能比镍镀层更好的合金镀层。     

电沉积Ni-W合金镀层的X射线光电子能谱分析

采用X射线光电子能谱（XPS）对电沉积Ni-W合金镀层表面膜进行了分析。研究结果表明，Ni-W合金镀层表面存在一层薄的氧化膜，而钨的氧化作用远大于镍，Ni-W合金镀层中W含量的提高对耐蚀性起决定作用。     

n-Al2O3P/Ni复合刷镀层的组织和摩擦磨损特性

研究了镍基纳米Al2O3复合电刷镀层（n-Al2O3^p/Ni）的组织特征及擦磨损特性，并与快镍刷镀（Ni)进行了比较。结果表明：n-Al2O3^p/Ni复合刷镀层表面粗糙度更小，组织更致密，镀层摩擦系数随镀液中纳米粒子含量增加稍有增大；n-Al2O3在复合刷镀层中弥散分布，与基相良好结合；复合镀的耐磨性能明显优于Ni刷镀层，镀液中n-Al2O3含量为20g/L时，复合刷镀层具有最佳耐磨性能。