Real-time molecular characterization of air pollutants in a Hong Kong residence: Implication of indoor source emissions and heterogeneous chemistry

Due to the high health risks associated with indoor air pollutants and long-term exposure, indoor air quality has received increasing attention. In this study, we put emphasis on the molecular composition, source emissions, and chemical aging of air pollutants in a residence with designed activities mimicking ordinary Hong Kong homes. More than 150 air pollutants were detected at molecular level, 87 of which were quantified at a time resolution of not less than 1 hour. The indoor-to-outdoor ratios were higher than 1 for most of the primary air pollutants, due to emissions of indoor activities and indoor backgrounds (especially for aldehydes). In contrast, many secondary air pollutants exhibited higher concentrations in outdoor air. Painting ranked first in aldehyde emissions, which also caused great enhancement of aromatics. Incense burning had the highest emissions of particle-phase organics, with vanillic acid and syringic acid as markers. The other noteworthy fingerprints enabled by online measurements included linoleic acid, cholesterol, and oleic acid for cooking, 2,5-dimethylfuran, stigmasterol, iso-/anteiso-alkanes, and fructose isomers for smoking, C₂₈-C₃₄ even n-alkanes for candle burning, and monoterpenes for the use of air freshener, cleaning agents, and camphor oil. We showed clear evidence of chemical aging of cooking emissions, giving a hint of indoor heterogeneous chemistry. This study highlights the value of organic molecules measured at high time resolutions in enhancing our knowledge on indoor air quality.     

Low-temperature hot-press sintering of AlN ceramics with MgO–CaO–Al2O3–SiO2 glass additives for ceramic heater applications

Aluminum nitride (AlN) is used a ceramic heater material for the semiconductor industry. Because extremely high temperatures are required to achieve dense AlN components, sintering aids such as Y₂O₃ are typically added to reduce the sintering temperature and time. To further reduce the sintering temperature, in this study, a low-melting-temperature glass (MgO–CaO–Al₂O₃–SiO₂; MCAS) was used as a sintering additive for AlN. With MCAS addition, fully dense AlN was obtained by hot-press sintering at 1500 °C for 3 h at 30 MPa. The mechanical properties, thermal conductivity, and volume resistance of the sintered AlN–MCAS sample were evaluated and compared with those of a reference sample (AlN prepared with 5 wt% Y2O3 sintering aid sintered at 1750 °C for 8 h at 10 MPa). The thermal conductivity of AlN prepared with 0.5 wt% MCAS was 91.2 W/m?K, which was 84.8 W/m?K lower than that of the reference sample at 25 °C; however, the difference in thermal conductivity between the samples was only 14.2 W/m?K at the ceramic-heater operating temperature of 500 °C. The flexural strength of AlN–MCAS was 550 MPa, which was higher than that of the reference sample (425 MPa); this was attributed to the smaller grain size achieved by low-temperature sintering. The volume resistance of AlN–MCAS was lower than that of the reference sample in the range of 200–400 °C. However, the resistivity of the proposed AlN–MCAS sample was higher than that of the reference sample (500 °C) owing to grain-boundary scattering of phonons. In summary, the proposed sintering strategy produces AlN materials for heater applications with low production cost, while achieving the properties required by the semiconductor industry.     

颗粒类型对颗粒增强铝基复合材料性能的影响

本文对粉末冶金法制备的ＳｉＣ和ＴｉＣ颗粒增强铝基复合材料进行了研究。试验表明，在颗粒含量相同、尺寸相当的条件下，ＴｉＣ增强Ａｌ基复合材料的强度和模量均低于ＳｉＣ增强Ａｌ基复合材料，但其屈强比却明显高于ＳｉＣ增强Ａｌ基复合材料。高温长时间等温处理对ＴｉＣ颗粒增强纯Ａｌ复合材料的强度没有明显的影响。     

复合聚合物微粒乳液的制备与应用

对种子乳液聚合中加料方式、单体亲水性、引发剂等因素对复合微粒聚合物形成的影响作了介绍 ,总结了聚合物微粒形态预测的热力学和动力学方法。同时 ,讨论了复合聚合物微粒设计的原理并评述了其应用情况     

铁锈渣对氧气生产的危害

介绍铁锈、铁锈渣对氧气生产的危害 ,分析一起因铁锈、铁锈渣引起的氧压机着火而殃及氧气囊燃烧的事故 ,针对分析的原因提出预防措施。     

A novel laboratory bench for practical evaluation of catalysts useful for simultaneous conversion of NOx and soot in diesel exhaust

This study deals with the development of a laboratory bench for the practical evaluation of catalysts that are useful for the direct conversion of NO_x and soot in the exhaust of diesel engines. The employed model exhaust is generated by using a diffusion burner with additionally dosing some gaseous components to the burner gas to obtain a realistic feed composition. The produced soot is extensively characterized by employing thermogravimetry, transmission electron microscopy, N₂ physisorption and temperature programmed techniques. The results of the different characterization methods show that the present soot is suitable for the intended catalytic investigations. The simultaneous conversion of NO_x and soot is examined like in practice, i.e. the soot is separated from the tail gas by a diesel particulate filter (DPF) that is coated with the catalyst. The deposited soot is then catalytically converted by NO_x and O₂ to form N₂ and CO₂. The conversions of NO_x and soot are measured by exclusively applying gas analysers, whereby a special experimental procedure is developed to determine the soot removal. Hence, additional soot related analytics are not required. To show the suitability of the constructed bench a Pt/Fe₂O₃/β-zeolite sample is taken as test catalyst that is reported to be very active in NO_x/soot reaction. The measurements performed with and without catalyst clearly show the effect of the used sample in simultaneous NO_x/soot conversion. We therefore consider the constructed laboratory bench to be a useful tool for testing and ranking catalytic materials.     

SiC颗粒尺寸及含量对SiCp／2024Al复合材料性能的影响

本文对粉末冶金法制备的SiCp/2024Al复合材料的性能进行了研究。随SiC颗粒尺寸的增大,复合材料的强度降低,而塑性和磨损抗力则增加。SiC颗粒尺寸对复合材料的物理性能没有什么影响。增加SiC颗粒含量,复合材料的强度、模量均增大,磨损抗力亦明显增加,而塑性和热膨胀系数则降低。     

上海市吴淞工业区大气PM2.5水溶成分的元素分析及细胞毒性研究

通过ICP-MS测定了上海市吴淞地区大气PM2.5水溶成分金属元素含量,通过四唑盐(MTT)测定细胞存活率,通过超氧化歧化酶(SOD)和丙二醛(MDA)两个指标测定细胞氧化损伤,琼脂糖凝胶电泳测定细胞内DNA损伤,流式细胞仪(Flow cytometry)检测细胞凋亡和周期等实验研究了大气PM2.5水溶成分的细胞毒性.实验结果表明:PM2.5可溶成分中Zn元素含量最高,PM2.5在一定浓度范围内能导致细胞死亡,引起细胞的氧化损伤,影响DNA的复制,阻碍细胞增殖,但没有诱导细胞凋亡.PM2.5中可溶金属离子对细胞毒性表现为联合作用.     

Ti/AlN陶瓷界面反应的热力学研究

对AlN陶瓷在室温和超高真空条件下蒸镀金属钛过程的界面反应进行了热力学研究，并用X光电子能谱（XPS）进行了验证，表明在金属钛沉积以前AlN陶瓷在空气中表面部分被氧化，当样品沉积了金属钛后，刚沉积上的钛是氧化状态，随着钛沉积厚度的增加，表面TiN和Al2O3的成分都增加。